FES8AT THRU FES8JT
FAST EFFICIENT PLASTIC RECTIFIER
Reverse Voltage - 50 to 600 Volts
TO-220AC
0.185 (4.70) 0.415 (10.54) MAX. 0.370 (9.40) 0.360 (9.14) 0.154 (3.91) DIA. 0.148 (3.74) 0.055 (1.39) 0.045 (1.14) 0.175 (4.44)
Forward Current - 8.0 Amperes
FEATURES
♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ Glass passivated chip junction ♦ Low leakage, high voltage ♦ High surge current capability ♦ Superfast recovery time, for high efficiency ♦ High temperature soldering guaranteed: 250°C, 0.16" (4.06mm) from case for 10 seconds
0.113 (2.87) 0.103 (2.62) 0.145 (3.68) 0.135 (3.43) 0.560 (14.22) 0.530 (13.46) 0.410 (10.41) 0.390 (9.91) PIN 1 0.160 (4.06) 0.140 (3.56) 0.560 (14.22) 0.530 (13.46) 2 0.635 (16.13) 0.625 (15.87) 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.110 (2.79) 0.100 (2.54)
MECHANICAL DATA
Case: JEDEC TO-220AC fully overmolded plastic body over passivated chip Terminals: Plated lead solderable per MIL-STD-750, Method 2026 Polarity: As marked Mounting Position: Any Mounting Torque: 5 in. - lbs. max. Weight: 0.064 ounce, 1.81 grams
0.105 (2.67) 0.095 (2.41)
0.037 (0.94) 0.027 (0.68)
0.022 (0.56) 0.014 (0.36)
PIN 1 0.205 (5.20) 0.195 (4.95) PIN 2 CASE
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS
FES 8AT
FES 8BT
FES 8CT
FES 8DT
FES 8FT
FES 8GT
FES 8HT
FES 8JT
UNITS
Maximum recurrent peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at TC=100°C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at 8.0A Maximum DC reverse current at rated DC blocking voltage TC=25°C at TC=100°C
VRRM VRMS VDC I(AV)
50 35 50
100 70 100
150 105 150
200 140 200 8.0
300 210 300
400 280 400
500 350 500
600 Volts 420 Volts 600 Volts Amps
IFSM VF IR trr CJ RΘJA RΘJC TJ, TSTG 35.0 0.95
125.0 1.3 10.0 500.0 50.0 85.0 15.0 2.2 -65 to +150 60.0 1.5
Amps Volts µA ns pF °C/W °C
Maximum reverse recovery time (NOTE 1) Typical junction capacitance (NOTE 2) Typical thermal resistance (NOTE 3)
(NOTE 4)
Operating junction and storage temperature range
NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to ambient in free air, no heatsink (4) Thermal resistance from junction to case mounted on heatsink
4/98
RATINGS AND CHARACTERISTIC CURVES FES8AT THRU FES8JT
FIG. 1 - MAXIMUM FORWARD CURRENT DERATING CURVES FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT
10
AVERAGE FORWARD RECTIFIED CURRENT, AMPERES
HEATSINK, CASE TEMPERATURE, TC
150
PEAK FORWARD SURGE CURRENT, AMPERES
RESISTIVE OR INDUCTIVE LOAD
8.0
125 100 75 50 25 0 1
TC=100°C 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method)
6.0
4.0
FREE AIR, AMBIENT, TEMPERATURE TA
2.0
0
0
50
100
150
10
NUMBER OF CYCLES AT 60 HZ
100
AMBIENT TEMPERATURE, °C
FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS
FIG. 4 - TYPICAL REVERSE LEAKAGE CHARACTERISTICS
40
INSTANTANEOUS FORWARD CURRENT, AMPERES
100
TJ=125°C
10
TJ=25°C
INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES
10
25 TJ=1 °C
1.0
1
TJ=
100
°C
PULSE WIDTH=300µs 1% DUTY CYCLE
50 - 200V 300 - 400V 500 - 600V
0.1 0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
INSTANTANEOUS FORWARD VOLTAGE, VOLTS
0.1
TJ=
25°
C
50-400V 500-600V
FIG. 5 - TYPICAL JUNCTION CAPACITANCE
0.01
1,000
JUNCTION CAPACITANCE, pF
TJ=25°C f=1.0 MHz Vsig=50mVp-p
0
20
40
60
80
100
PERCENT OF RATED PEAK REVERSE VOLTAGE, %
100
50 - 400V 500 - 600V
10 0.1
1
10
100
REVERSE VOLTAGE, VOLTS
很抱歉,暂时无法提供与“FES8FT”相匹配的价格&库存,您可以联系我们找货
免费人工找货