FESF8JT

NEW PRODUCT NEW PRODUCT NEW PRODUCT FESF8AT THRU FESF8JT FAST EFFICIENT PLASTIC RECTIFIER Reverse Voltage - 50 to 600 Volts ITO-220AC Forward Current - 8.0 Amperes FEATURES ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ Glass passivated chip junction ♦ Low leakage, high voltage ♦ High surge current capability ♦ Superfast recovery time, for high efficiency ♦ High temperature soldering guaranteed: 250°C, 0.25" (6.35mm) from case for 10 seconds 0.405 (10.27) 0.383 (9.72) 0.188 (4.77) 0.172 (4.36) 0.110 (2.80) 0.100 (2.54) 0.140 (3.56) DIA. 0.130 (3.30) 0.131 (3.39) DIA. 0.122 (3.08) 0.600 (15.5) 0.580 (14.5) 0.670 (17.2) 0.646 (16.4) 2 0.350 (8.89) 0.330 (8.38) PIN 1 0.191 (4.85) 0.171 (4.35) 0.560 (14.22) 0.530 (13.46) 0.060 (1.52) 0.110 (2.80) 0.100 (2.54) MECHANICAL DATA Case: JEDEC ITO-220AC fully overmolded plastic body over passivated chip Terminals: Plated lead solderable per MIL-STD-750, Method 2026 Polarity: As marked Mounting Position: Any Weight: 0.064 ounce, 1.81 grams Mounting Torque: 5 in. - lbs. max. 0.037 (0.94) 0.027 (0.69) 0.205 (5.20) 0.195 (4.95) PIN 1 PIN 2 0.022 (0.55) 0.014 (0.36) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS FESF 8AT FESF 8BT FESF 8CT FESF 8DT FESF 8FT FESF 8GT FESF 8HT FESF 8JT UNITS Maximum recurrent peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at TC=100°C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at 8.0A Maximum DC reverse current at rated DC blocking voltage TC=25°C at TC=100°C VRRM VRMS VDC I(AV) 50 35 50 100 70 100 150 105 150 200 140 200 8.0 300 210 300 400 280 400 500 350 500 600 Volts 420 Volts 600 Volts Amps IFSM VF IR trr CJ RΘJC TJ, TSTG 35.0 0.95 125.0 1.3 10.0 500.0 50.0 85.0 5.0 -65 to +150 60.0 1.5 Amps Volts µA ns pF °C/W °C Maximum reverse recovery time (NOTE 1) Typical junction capacitance (NOTE 2) Typical thermal resistance (NOTE 3) Operating junction and storage temperature range NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to case mounted on heatsink 4/98 RATINGS AND CHARACTERISTIC CURVES FESF8AT THRU FESF8JT FIG. 1 - MAXIMUM FORWARD CURRENT DERATING CURVES FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 10 AVERAGE FORWARD RECTIFIED CURRENT, AMPERES HEATSINK, CASE TEMPERATURE, TC 150 PEAK FORWARD SURGE CURRENT, AMPERES RESISTIVE OR INDUCTIVE LOAD 8.0 125 100 75 50 25 0 1 TC=100°C 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 6.0 4.0 FREE AIR, AMBIENT, TEMPERATURE TA 2.0 0 0 50 100 150 10 NUMBER OF CYCLES AT 60 HZ 100 AMBIENT TEMPERATURE, °C FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE LEAKAGE CHARACTERISTICS 40 INSTANTANEOUS FORWARD CURRENT, AMPERES 100 TJ=125°C 10 TJ=25°C INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES 10 25 TJ=1 °C 1.0 50 - 200V 300 - 400V 500 - 600V PULSE WIDTH=300µs 1% DUTY CYCLE 1 TJ= 100 °C 0.1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 0.1 TJ= 25° C 50-400V 500-600V FIG. 5 - TYPICAL JUNCTION CAPACITANCE 0.01 1,000 JUNCTION CAPACITANCE, pF TJ=25°C f=1.0 MHz Vsig=50mVp-p 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, % 100 50 - 400V 500 - 600V 10 0.1 1 10 100 REVERSE VOLTAGE, VOLTS