G2SBA60

NEW PRODUCT NEW PRODUCT NEW PRODUCT G2SBA20 AND G2SBA60 GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER Reverse Voltage - 200 and 600 Volts Case Type GBL 0.125 (3.17) x 45 degrees Chamfer 0.825 (20.9) 0.815 (20.7) Forward Current - 1.5 Amperes FEATURES 0.421 (10.7) 0.411 (10.4) 0.080 (2.03) 0.060 (1.50) 0.095 (2.41) 0.080 (2.03) 0.098 (2.5) 0.075 (1.9) 0.050 (1.27) 0.040 (1.02) 0.098 (2.5) 0.075 (1.9) 0.718 (18.2) 0.682 (17.3) Lead Depth 0.022 (0.56) 0.018 (0.46) ¨ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ¨ This series is UL listed under the Recognized Component Index, file number E54214 ¨ High case dielectric strength of 1500 VRMS ¨ Ideal for printed circuit boards ¨ Glass passivated chip junction ¨ High surge current capability ¨ High temperature soldering guaranteed: 260¡C/10 seconds, 0.375 (9.5mm) lead length, 5lbs. (2.3kg) tension 0.210 (5.3) 0.190 (4.8) 0.040 (1.02) 0.030 (0.76) 0.022 (0.56) 0.018 (0.46) 0.140 (3.56) 0.128 (3.25) MECHANICAL DATA Case: Molded plastic body over passivated junctions Terminals: Plated leads solderable per MIL-STD-750, Method 2026 Mounting Position: Any Weight: 0.071 ounce, 2.0 grams Polarity shown on front side of case, positive lead beveled corner. If preferred, marking may be on reverse side of case. Dimensions in inches and (millimeters) Polarity shown on front side of case: positive lead by beveled corner MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25¡C ambient temperature unless otherwise specified. SYMBOLS G2SBA20 G2SBA60 UNITS Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified TA=25¡C output current at Peak forward surge current single sine-wave superimposed on rated load (JEDEC Method) Rating for fusing (t