G5SBA60

NEW PRODUCT NEW PRODUCT NEW PRODUCT G5SBA20 AND G5SBA60 GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER Reverse Voltage - 200 and 600 Volts Forward Current - 6.0 Amperes FEATURES Case Style GBU 0.880 (22.3) 0.020 R (TYP.) 0.860 (21.8) 0.125 (3.2) x 45o CHAMFER 0.310 (7.9) 0.290 (7.4) 0.160 (4.1) 0.140 (3.5) 0.740 (18.8) 0.720 (18.3) 0.085 (2.16) 0.065 (1.65) 0.075 (1.9) R. 0.080 (2.03) 0.060 (1.52) 0.140 (3.56) 0.130 (3.30) 9o TYP. 5o TYP. 0.085 (2.16) 0.710 (18.0) 0.690 (17.5) 0.100 (2.54) 0.085 (2.16) 0.050 (1.27) 0.040 (1.02) 0.075 (1.90) ¨ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ¨ This series is UL listed under the Recognized Component Index, file number E54214 ¨ High case dielectric strength of 1500 VRMS ¨ Ideal for printed circuit boards ¨ Glass passivated chip junction ¨ High surge current capability ¨ High temperature soldering guaranteed: 260¡C/10 seconds, 0.375 (9.5mm) lead length, 5lbs. (2.3kg) tension 0.022 (0.56) 0.080 (2.03) 0.065 (1.65) 0.190 (4.83) 0.210 (5.33) 0.018 (0.46) MECHANICAL DATA Case: Molded plastic body over passivated junctions Terminals: Plated leads solderable per MIL-STD-750, Method 2026 Mounting Position: Any (NOTE 3) Mounting Torque: 5 in. - lb. max. Weight: 0.15 ounce, 4.0 grams Polarity Polarity front side of of case, positive lead by beveled corner shown onshown on front sidecase, positive lead beveled corner. If preferred, marking may be on reverse side of case. Lead forming option with 10mm-7.5mm-7.5mm spacing is available. Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25¡C ambient temperature unless otherwise specified. SYMBOLS G5SBA20 G5SBA60 UNITS Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified TC=100¡C (NOTE 1) output current at TA=25¡C (NOTE 2) Peak forward surge current single sine-wave superimposed on rated load (JEDEC Method) Rating for fusing (t