GBL005

GBL005 THRU GBL10 GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER Reverse Voltage - 50 to 1000 Volts Case Type GBL 0.125 (3.17) x 45 degrees Chamfer 0.825 (20.9) 0.815 (20.7) Forward Current - 4.0 Amperes FEATURES 0.421 (10.7) 0.411 (10.4) 0.080 (2.03) 0.060 (1.50) 0.095 (2.41) 0.080 (2.03) 0.098 (2.5) 0.075 (1.9) 0.050 (1.27) 0.040 (1.02) 0.210 (5.3) 0.190 (4.8) 0.040 (1.02) 0.030 (0.76) 0.022 (0.56) 0.018 (0.46) 0.098 (2.5) 0.075 (1.9) 0.718 (18.2) 0.682 (17.3) Lead Depth 0.022 (0.56) 0.018 (0.46) ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ This series is UL listed under the Recognized Component Index, file number E54214 ♦ Glass passivated chip junctions ♦ High case dielectric strength ♦ Typical IR less than 0.1µA ♦ High surge current capability ♦ Ideal for printed circuit boards ♦ High temperature soldering guaranteed: 260°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension 0.140 (3.56) 0.128 (3.25) MECHANICAL DATA Case: Molded plastic body over passivated junctions Terminals: Plated leads solderable per MIL-STD-750, Method 2026 Mounting Position: Any Weight: 0.071 ounce, 2.0 grams Polarity shown on front side of case: positive lead by beveled corner Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS GBL 005 GBL 01 GBL 02 GBL 04 GBL 06 GBL 08 GBL 10 UNITS Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified output current at TC=50°C (NOTE 1) TA=40°C (NOTE 2) VRRM VRMS VDC I(AV) IFSM I2t VF TA=25°C TA=125°C (NOTE 3) (NOTE 1) (NOTE 2) 50 35 50 100 70 100 200 140 200 400 280 400 4.0 3.0 150.0 93.0 1.1 5.0 500.0 600 420 600 800 560 800 1000 Volts 700 Volts 1000 Volts Amps Amps A2sec Volts µA Peak forward surge current, single half sine-wave superimposed on rated load (JEDEC Method) TJ=150°C Rating for fusing (t