GI1-1200

GI1-1200 THRU GI1-1600 MINIATURE HIGH VOLTAGE GLASS PASSIVATED RECTIFIER Reverse Voltage - 1200 to 1600 Volts DO204AP Forward Current - 1.0 Ampere FEATURES N 0.034 (0.86) 0.028 (0.71) DIA. 1.0 (25.4) MIN. 0.240 (6.1) MAX. ♦ High temperature metallurgically bonded construction ♦ Glass passivated cavity-free junction package ♦ 1.0 Ampere operation at TA=75°C with no thermal runaway ♦ Typical IR less than 0.1µA ♦ Hermetically sealed package ♦ Capable of meeting environmental standards of MIL-S-19500 ♦ High temperature soldering guaranteed: 350°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension P A T E T E 0.150 (3.8) 0.100 (2.5) DIA. D * 1.0 (25.4) MIN. MECHANICAL DATA Case: JEDEC DO-204AP solid glass body Terminals: Solder plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.02 ounce, 0.56 grams Dimensions in inches and (millimeters) *Brazed-lead assembly is covered by Patent No. 3,930,306 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS GI1-1200 GI1-1400 GI1-1600 UNITS Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current 0.375” (9.5mm) lead length at TA=75°C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at 1.0A 3.14A Maximum DC reverse current at rated DC blocking voltage Maximum reverse recovery time (NOTE 1) Maximum forward recovery time (NOTE 2) Typical junction capacitance (NOTE 3) Typical thermal resistance (NOTE 4) Operating junction and storage temperature range TA= 25°C TA=100°C VRRM VRMS VDC I(AV) IFSM VF IR tfr trr CJ RΘJA TJ,TSTG 1200 840 1200 1400 980 1400 1.0 30.0 1.1 1.3 10.0 100.0 25.0 1.0 15.0 55.0 -65 to +175 1600 1120 1600 Volts Volts Volts Amp Amps Volts µA µs µs pF °C/W °C NOTES: (1) Measured on Tektronix Type "S" recovery plug-in, Tektronix 545 scope or equivalent IFM=20mA, IRM=2mA (2) Measured on Tektronix Type "S" recovery plug-in, Tektronix 545 or equivalent, I FM=20mA (3) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts (4) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length, P.C.B. mounted 4/98 RATINGS AND CHARACTERISTIC CURVES GI1-1200 AND GI1-1600 FIG. 1 - FORWARD CURRENT DERATING CURVE AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 1.5 1.25 1.0 0.75 0.5 0.25 0 20 CAPACITANCE LOAD 5.0 Ipk/IAV= 10 20 Ipk/IAV=π FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT, AMPERES 60 HZ RESISTIVE OR INDUCTIVE LOAD 0.375" (9.5mm) LEAD LENGTH 50 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 40 TA=25°C NO LOAD CONDITION 30 20 TJ=TJ max. RATED LOAD CONDITIONS 10 40 60 80 100 120 140 160 180 0 AMBIENT TEMPERATURE, °C 1 10 NUMBER OF CYCLES AT 60 HZ 100 FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 10 INSTANTANEOUS FORWARD CURRENT, AMPERES TJ=150°C PULSE WIDTH=300µs 1% DUTY CYCLE 10 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES TJ=125°C 1 TJ=25°C 1 0.1 0.1 TJ=75°C TJ=25°C 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0.01 0 20 40 60 80 100 INSTANTANEOUS FORWARD VOLTAGE, VOLTS PERCENT OF RATED PEAK REVERSE VOLTAGE, % FIG. 5 - TYPICAL JUNCTION CAPACITANCE 30 JUNCTION CAPACITANCE, pF TJ=25°C f=1.0 MHz Vsig=50mVp-p 10 1 1 10 REVERSE VOLTAGE, VOLTS 100