GI914

GI910 THRU GI917 MEDIUM-SWITCHING PLASTIC RECTIFIER Reverse Voltage - 50 to 800 Volts DO-201AD Forward Current - 3.0 Amperes FEATURES ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ High surge current capability ♦ Construction utilizes void-free molded plastic technique ♦ High forward current operation ♦ Fast switching for high efficiency ♦ High temperature soldering guaranteed: 250°C/10 seconds, 0.375 (9.5mm) lead length, 5 lbs. (2.3kg) tension 1.0 (25.4) MIN. 0.210 (5.3) 0.190 (4.8) DIA. 0.375 (9.5) 0.285 (7.2) MECHANICAL DATA 0.052 (1.32) 0.048 (1.22) DIA. 1.0 (25.4) MIN. Dimensions in inches and (millimeters) Case: JEDEC DO-201AD molded plastic body Terminals: Plated axial leads solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.04 ounce, 1.1 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS GI910 GI911 GI912 GI914 GI916 GI917 UNITS Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current 0.375" (9.5mm) lead length at T A=90°C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at: 3.0A 9.4A, TJ=175°C Maximum DC reverse current at rated DC blocking voltage Typical junction capacitance (NOTE 1) Maximum reverse recovery time (NOTE 2) Maximum reverse recovery current Typical thermal resistance (NOTE 3) Operating junction and storage temperature range TA=25°C TA=100°C VRRM VRMS VDC I(AV) 50 35 50 100 70 100 200 140 200 3.0 400 280 400 600 420 600 800 560 800 Volts Volts Volts Amps IFSM 100.0 Amps VF IR CJ trr IRM(REC) RΘJA RΘJL TJ ,TSTG 1.25 1.10 10.0 300.0 28.0 750 2.0 22.0 8.0 -50 to +150 Volts µA pF ns Amps °C/W °C NOTES: (1) Measured at 1 MHz and applied reverse voltage of 4.0 Volts (2) Reverse recovery test conditions: IF=1.0A, VR=30V, di/dt=50A/µs, and Irr=10% IRM for measurement of trr (3) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5mm) lead length, both leads equally heat sink 4/98 RATINGS AND CHARACTERISTIC CURVES GI910 THRU GI917 FIG.1 - FORWARD CURRENT DERATING CURVE 4.0 AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG. 2 - MAXIMUM PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT, AMPERES I(pk) I(AV) = π 0.375” (9.5mm) LEAD LENGTH 200 TJ=25°C 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 3.0 0.8 x 0.8 x 0.04” (20 x 20 x 1mm) COPPER HEATSINKS 100 NON-REPETITIVE 2.0 CAPACITIVE LOADS I(pk) 5.0 = I(AV) 10 20 TJ=150°C 1.0 REPETITIVE 0 30 50 70 90 110 130 150 170 AMBIENT TEMPERATURE, °C 10 1 10 NUMBER OF CYCLES AT 60 HZ 100 FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 100 FIG. 4 - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT AMPERES 10 INSTANTANEOUS REVERSE CURRENT MICROAMPERES 10 TJ=100°C 1 1 TJ=50°C 0.1 TJ=25°C 0.1 TJ=25°C PULSE WIDTH=300µs 1% DUTY CYCLE 0.01 0 0.01 0.4 20 40 60 80 100 0.6 0.8 1.0 1.2 1.4 1.6 1.8 INSTANTANEOUS FORWARD VOLTAGE, VOLTS PERCENT OF RATED PEAK REVERSE VOLTAGE, % FIG. 5 - TYPICAL JUNCTION CAPACITANCE 100 JUNCTION CAPACITANCE, pF TJ=25°C f=1.0 MHz Vsig=50mVp-p 10 1 10 REVERSE VOLTAGE, VOLTS 100