GIF1404

NEW PRODUCT NEW PRODUCT NEW PRODUCT GIF1401 THRU GIF1404 FAST EFFICIENT PLASTIC RECTIFIER Reverse Voltage - 50 to 200 Volts ITO-220AC 0.405 (10.27) 0.383 (9.72) 0.188 (4.77) 0.172 (4.36) 0.110 (2.80) 0.100 (2.54) 0.140 (3.56) DIA. 0.130 (3.30) 0.131 (3.39) DI 0.122 (3.08) Forward Current - 8.0 Amperes FEATURES ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ Glass passivated chip junction ♦ Low power loss ♦ Low leakage current ♦ High surge capability ♦ Superfast recovery time for high efficiency ♦ High temperature soldering guaranteed: 250°C, 0.25" (6.35mm) from case for 10 seconds 0.600 (15.5) 0.580 (14.5) 0.670 (17.2) 0.646 (16.4) 2 0.350 (8.89) 0.330 (8.38) PIN 1 0.191 (4.85) 0.171 (4.35) 0.560 (14.22) 0.530 (13.46) 0.060 (1.52) 0.110 (2.80) 0.100 (2.54) MECHANICAL DATA Case: JEDEC ITO-220AC molded plastic body over passivated chip Terminals: Lead solderable per MIL-STD-750, Method 2026 Polarity: As marked Mounting Position: Any Weight: 0.064 ounce, 1.81 grams Mounting Torque: 5 in. - lbs. max. 0.037 (0.94) 0.027 (0.69) 0.205 (5.20) 0.195 (4.95) PIN 1 PIN 2 0.022 (0.55) 0.014 (0.36) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS GIF1401 GIF1402 GIF1403 GIF1404 UNITS Maximum recurrent peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at TC=125°C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) at TC=125°C Maximum instantaneous forward voltage at: IF=4A, TJ=100°C IF=8A, TJ=100°C IF=4A, TJ=25°C IF=8A, TJ=25°C Maximum DC reverse current at rated DC blocking voltage Maximum reverse recovery time (NOTE 1) Typical junction capacitance (NOTE 2) Typical thermal resistance (NOTE 3) Operating and storage temperature range NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to case mounted on heatsink VRRM VRMS VDC I(AV) IFSM 50 35 50 100 70 100 8.0 125.0 150 105 150 200 140 200 Volts Volts Volts Amps Amps VF 0.800 0.895 0.900 0.975 5.0 150.0 35.0 85.0 5.0 -65 to +150 Volts TC=25°C TC=100°C IR trr CJ RΘJC TJ, TSTG µA ns pF °C/W °C 4/98 RATINGS AND CHARACTERISTIC CURVES GIF1401 THRU GIF1404 AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 12 10 INFINITE HEATSINK MOUNTING, TC FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT, AMPERES RESISTIVE OR INDUCTIVE LOAD 150 125 100 75 50 25 0 1 TC=125°C 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 8.0 6.0 4.0 2.0 0 0 50 100 150 TEMPERATURE, °C FREE AIR RATING, TA P.C.B. MOUNTING 10 NUMBER OF CYCLES AT 60 HZ 100 FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE LEAKAGE CHARACTERISTICS 80 100 INSTANTANEOUS FORWARD CURRENT, AMPERES TJ=125°C TJ=25°C 10 INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES PULSE WIDTH=300µs 1% DUTY CYCLE TJ=125°C 10 TJ=100°C 1 0.1 1 0.01 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 0.1 TJ=25°C FIG. 5 - TYPICAL JUNCTION CAPACITANCE 1,000 TJ=25°C f=1.0 MHZ Vsig=50mVp-p 0.01 0 20 40 60 80 PERCENT OF RATED PEAK REVERSE VOLTAGE, % 100 JUNCTION CAPACITANCE, pF 100 10 0.1 1 10.0 100 REVERSE VOLTAGE, VOLTS