GP02-40

GP02-20 THRU GP02-40 HIGH VOLTAGE GLASS PASSIVATED JUNCTION RECTIFIER Reverse Voltage - 2000 to 4000 Volts DO-204AL Forward Current - 0.25 Ampere FEATURES ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ High temperature metallurgically bonded construction ♦ Glass passivated cavity-free junctions ♦ Capable of meeting environmental standards of MIL-S-19500 ♦ High temperature soldering guaranteed: 350°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension N T E D * P A T E 1.0 (25.4) MIN. 0.107 (2.7) 0.080 (2.0) DIA. 0.205 (5.2) 0.160 (4.1) 1.0 (25.4) MIN. 0.034 (0.86) 0.028 (0.71) DIA. MECHANICAL DATA Case: JEDEC DO-204AL molded plastic over glass body Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.012 ounce, 0.3 gram *Glass-plastic encapsulation technique is covered by Patent No. 3,996,602 and brazed-lead assembly by Patent No. 3,930,306 ® Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS GP02 -20 GP02 -25 GP02 -30 GP02 -35 GP02 -40 UNITS Maximum repetitive peak reverse voltage Maximum RMS Voltage Maximum DC blocking voltage Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=55°C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load at: (JEDEC Method) TA=55°C Maximum instantaneous forward voltage at 1.0A Maximum DC reverse current at rated DC blocking voltage Typical reverse recovery time (NOTE 1) Typical junction capacitance (NOTE 2) Typical thermal resistance (NOTE 3) Operating junction and storage temperature range TA= 25°C TA=100°C VRRM VRMS VDC I(AV) 2000 1400 2000 2500 1750 2500 3000 2100 3000 0.25 3500 2450 3500 4000 2800 4000 Volts Volts Volts Amp IFSM VF IR trr CJ RΘJA TJ, TSTG 15.0 3.0 5.0 50.0 2.0 3.0 130.0 -65 to +175 Amps Volts µA µs pF °C/W °C NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead lengths, P.C.B. mounted 4/98 RATINGS AND CHARACTERISTIC CURVES GP02-20 THRU GP02-40 FIG. 1 - FORWARD CURRENT DERATING AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 0.25 PEAK FORWARD SURGE CURRENT, AMPERES 60 HZ RESISTIVE OR INDUCTIVE LOAD 15 TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 0.2 0.15 10 0.1 5.0 0.05 0.375" (9.5mm) LEAD LENGTH 0 0 25 50 75 100 125 150 175 0 1 AMBIENT TEMPERATURE, °C 10 NUMBER OF CYCLES AT 60 HZ 100 FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS TJ=25°C PULSE WIDTH=300µs 1% DUTY CYCLE FIG. 4 - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES 10 INSTANTANEOUS FORWARD CURRENT, AMPERES 10 TJ=100°C 1 1 0.1 0.1 TJ=25°C 0.01 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 0.01 0 20 40 60 80 100 INSTANTANEOUS FORWARD VOLTAGE, VOLTS PERCENT OF RATED PEAK REVERSE VOLTAGE, % FIG. 5 - TYPICAL JUNCTION CAPACITANCE 6.0 5.0 4.0 3.0 2.0 1.0 0 0.1 TJ=25°C f=1.0 MHZ Vsig=50mVp-p JUNCTION CAPACITANCE, pF 1 10 100 REVERSE VOLTAGE, VOLTS