GP08J

GP08A THRU GP08J GLASS PASSIVATED JUNCTION RECTIFIER Reverse Voltage - 50 to 600 Volts Forward Current - 0.8 Ampere DO-204AL * FEATURES ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ High temperature metallurgically bonded construction ♦ Glass passivated cavity-free junction ♦ Capable of meeting environmental standards of MIL-S-19500 ♦ 0.8 Ampere operation at TA=55°C with no thermal runaway ♦ Typical IR less than 0.1µA ♦ High temperature soldering guaranteed: 350°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension T E D P A T E N 1.0 (25.4) MIN. 0.107 (2.7) 0.080 (2.0) DIA. 0.205 (5.2) 0.160 (4.1) 1.0 (25.4) MIN. 0.034 (0.86) 0.028 (0.71) DIA. NOTE: Lead diameter is 0.026 (0.66) 0.023 (0.58) for suffix "E" part numbers MECHANICAL DATA Case: JEDEC DO-204AL molded plastic over glass body Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.012 ounce, 0.3 gram Dimensions in inches and (millimeters) Glass-plastic encapsulation technique is covered by Patent No.3,996,602 and brazed-lead assembly by Patent No.3,930,306 * ® MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS GP08A GP08B GP08D GP08G GP08J UNITS Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current 0.375" (9.5mm) lead length at TA =55°C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) at TA=55°C Maximum instantaneous forward voltage at 0.8A Maximum full load reverse current full cycle average 0.375" (9.5mm) lead length at TA=55°C Maximum DC reverse current at rated DC blocking voltage Typical reverse recovery time (NOTE 1) Typical junction capacitance (NOTE 2) Typical thermal resistance (NOTE 3) Operating junction and storage temperature range TA=25°C TA=125°C VRRM VRMS VDC I(AV) 50 35 50 100 70 100 200 140 200 0 .8 400 280 400 600 420 600 Volts Volts Volts Amp IFSM VF IR(AV) IR trr CJ RΘJA TJ, TSTG 25.0 1.3 30.0 5.0 50.0 2.0 8.0 55.0 -65 to +175 Amps Volts µA µA µs pF °C/W °C NOTES: (1) Measure on IF =0.5A, IR =1.0A, Irr = 0.25A (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length, P.C.B. mounted 4/98 RATINGS AND CHARACTERISTIC CURVES GP08A THRU GP08J FIG. 1 - FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT, AMPERES FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 1.0 0.8 0.6 0.4 0.2 0.375" (9.5mm) LEAD LENGTH PEAK FORWARD SURGE CURRENT, AMPERES 60 HZ RESISTIVE OR INDUCTIVE LOAD 25 TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 20 15 10 0 20 40 60 80 100 120 140 160 180 AMBIENT TEMPERATURE, °C 5.0 0 1 10 NUMBER OF CYCLES AT 60 Hz 100 FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 20 INSTANTANEOUS FORWARD CURRENT, AMPERES 10 TJ=25°C PULSE WIDTH=300µs 1% DUTY CYCLE FIG. 4 - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, MICROAMPERES 10 TJ=100°C 1 1 0.1 0.1 TJ=25°C 0 0.4 0.01 0.6 0.8 1.0 1.2 1.4 0 20 40 60 80 100 INSTANTANEOUS FORWARD VOLTAGE, VOLTS PERCENT OF RATED PEAK REVERSE VOLTAGE, % FIG. 5 - TYPICAL JUNCTION CAPACITANCE TJ=25°C f=1.0 MHZ Vsig=50mVp-p 100 JUNCTION CAPACITANCE, pF TRANSIENT THERMAL IMPEDANCE (°C/W) FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE 100 10 10 1 1 0.1 0.1 0.01 0.1 1 10 100 1 10 100 t, PULSE DURATION, sec REVERSE VOLTAGE, VOLTS