MPG06J

MPG06A THRU MPG06M MINIATURE GLASS PASSIVATED JUNCTION PLASTIC RECTIFIER Reverse Voltage - 50 to 1000 Volts Case Style MPG06 Forward Current - 1.0 Ampere FEATURES ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ Low forward voltage, high current capability ♦ Glass passivated chip junction ♦ High surge capability ♦ Typical IR less than 0.1µA ♦ High temperature soldering guaranteed: 250°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension 0.100 (2.54) 0.090 (2.29) DIA 1.0 (25.4) MIN. 0.125 (3.18) 0.115 (2.92) MECHANICAL DATA 1.0 (25.4) MIN. 0.025 (0.635) 0.023 (0.584) DIA. Dimensions are in inches and (millimeters) Case: Molded plastic over passivated chip Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.0064 ounce, 0.181 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS MPG 06A MPG 06B MPG 06D MPG 06G MPG 06J MPG 06K MPG 06M UNITS Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=25°C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at 1.0A Maximum DC reverse current at rated DC blocking voltage Typical junction capacitance Typical reverse recovery time Typical thermal resistance (NOTE 3) VRRM VRMS VDC I(AV) 50 35 50 100 70 100 200 140 200 400 280 400 1.0 600 420 600 800 560 800 1000 700 1000 Volts Volts Volts Amp IFSM VF IR CJ trr RΘJA RΘJL TJ, TSTG 40.0 1.1 5.0 50.0 10.0 0.6 67.0 30.0 -55 to +150 Amps Volts µA pF µs °C/W °C TA=25°C TA=125°C (NOTE 1) (NOTE 2) Operating junction and storage temperature range NOTES: (1) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (2) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (3) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5mm) lead length, P.C.B. mounted with 0.22 x 0.22” (5.5 x 5.5mm) copper pads 4/98 RATINGS AND CHARACTERISTIC CURVES MPG06A THRU MPG06M FIG. 1 - FORWARD CURRENT DERATING CURVE FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT, AMPERES 1.2 AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 1.0 0.8 0.6 0.4 0.2 0 CAPACITANCE LOADS 5.0 Ipk/IAV = 10 20 60 HZ RESISTIVE OR INDUCTIVE LOAD 0.375" (9.5mm) LEAD LENGTH 50 40 30 RATED LOAD TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) NO LOAD CONDITION 20 10 0 0 25 50 75 100 125 150 175 1 10 NUMBER OF CYCLES AT 60 HZ 100 AMBIENT TEMPERATURE, °C FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, MICROAMPERES FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 30 10 TJ=125°C 10 INSTANTANEOUS FORWARD CURRENT, AMPERES TJ=150°C 1 TJ=75°C 1 TJ=25°C PULSE WIDTH=300µs 1% DUTY CYCLE 0.1 TJ=25°C 0.1 0.01 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, % 0.01 0.4 0.6 0.8 1.0 1 1.2 1.4 1.6 1.8 INSTANTANEOUS FORWARD VOLTAGE, VOLTS TRANSIENT THERMAL IMPEDANCE, °C/W FIG. 5 - TYPICAL JUNCTION CAPACITANCE FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE 30 JUNCTION CAPACITANCE, pF TJ=25°C f=1.0 MHZ Vsig=50mVp-p 100 10 10 1 1 1 10 REVERSE VOLTAGE, VOLTS 100 0.1 0.01 0.1 1 10 100 t, PULSE DURATION, sec.