RG1K

RG1A THRU RG1M GLASS PASSIVATED FAST SWITCHING RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 1.0 Ampere FEATURES E D DO-204AP 0.034 (0.86) 0.028 (0.71) DIA. 1.0 (25.4) MIN. 0.240 (6.1) MAX. 0.150 (3.8) 0.100 (2.5) DIA. 1.0 (25.4) MIN. ♦ High temperature metallurgically bonded construction ♦ Hermetically sealed package ♦ Glass passivated cavity-free junction ♦ 1.0 Ampere operation at TA=55°C with no thermal runaway ♦ Typical IR less than 0.1µA ♦ Capable of meeting environmental standards of MIL-S-19500 ♦ Fast switching for high efficiency ♦ High temperature soldering guaranteed: 350°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension P A T E N T * MECHANICAL DATA Dimensions in inches and (millimeters) *Brazed-lead assembly is covered by Patent No. 3,930,306 Case: JEDEC DO204AP solid glass body Terminals: Solder plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.02 ounce, 0.56 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS RG1A RG1B RG1D RG1G RG1J RG1K RG1M UNITS Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current 0.375” (9.5mm) lead length at TA=55°C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at 1.0A Maximum full load reverse current, full cycle average 0.375” (9.5mm) lead length at Maximum DC reverse current at rated DC blocking voltage Maximum reverse recovery time (NOTE 1) Typical junction capacitance (NOTE 2) Typical thermal resistance (NOTE 3) Operating junction and storage temperature range TA=25°C TA=100°C VRRM VRMS VDC I(AV) 50 35 50 100 70 100 200 140 200 400 280 400 1.0 600 420 600 800 560 800 1000 700 1000 Volts Volts Volts Amp IFSM VF IR(AV) 30.0 1.3 1.0 100.0 2.0 150 15.0 55.0 -65 to +175 200 250 500 Amps Volts µA µA ns pF °C/W °C IR trr CJ RΘJA TJ, TSTG NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length, P.C.B. mounted 4/98 RATINGS AND CHARACTERISTIC CURVES RG1A AND RG1M FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 30 PEAK FORWARD SURGE CURRENT, AMPERES TA=25°C 8.3ms SINGLE HALF SINE-WAVE(JEDEC Method) AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG. 1 - FORWARD CURRENT DERATING CURVE 1.0 0.8 RESISTIVE OR INDUCTIVE LOAD 20 Ipk/IAV=π 0.6 0.4 0.2 0.375" (9.5mm) LEAD LENGTH CAPACITANCE LOAD 5.0 Ipk/IAV= 10 20 10 0 1 100 125 150 175 10 NUMBER OF CYCLES AT 60 HZ 0 100 0 25 50 75 AMBIENT TEMPERATURE, °C FIG. 4 - TYPICAL REVERSE CHARACTERISTICS FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 20 10 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES 20 10 INSTANTANEOUS FORWARD CURRENT, AMPERES TJ=25°C PULSE WIDTH=300µs 1% DUTY CYCLE TJ=125°C 1 1 TJ=75°C 0.1 0.1 TJ=25°C 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 0.01 0 20 40 60 80 100 INSTANTANEOUS FORWARD VOLTAGE, VOLTS PERCENTAGE OF RATED PEAK REVERSE VOLTAGE, % FIG. 5 - TYPICAL JUNCTION CAPACITANCE 30 JUNCTION CAPACITANCE, pF TJ=25°C f=1.0 MHz Vsig, 50mVp-p max. 10 1 1 10 REVERSE VOLTAGE, VOLTS 100