RG2G

RG2A THRU RG2M GLASS PASSIVATED FAST SWITCHING RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 2.0 Amperes FEATURES E D DO-204AP 0.034 (0.86) 0.028 (0.71) DIA. 1.0 (25.4) MIN. 0.240 (6.1) MAX. 0.150 (3.8) 0.100 (2.5) DIA. 1.0 (25.4) MIN. ♦ High temperature metallurgically bonded construction ♦ Hermetically sealed package ♦ Glass passivated cavity-free junction ♦ 1.0 Ampere operation at TA=55°C with no thermal runaway ♦ Typical IR less than 0.1µA ♦ Capable of meeting environmental standards of MIL-STD-19500 ♦ Fast switching for high efficiency ♦ High temperature soldering guaranteed: 350°C/10 seconds 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension P A T E N T * MECHANICAL DATA Dimensions in inches and (millimeters) *Brazed-lead assembly is covered by Patent No. 3,930,306 Case: JEDEC DO-204AP solid glass body Terminals: Solder plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.02 ounce, 0.56 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS RG2A RG2B RG2D RG2G RG2J RG2K RG2M UNITS Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current 0.375” (9.5mm) lead lengths at TA=55°C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at 2.0A Maximum full load reverse current, full cycle average 0.375” (9.5mm) lead length at Maximum DC reverse current at rated DC blocking voltage Maximum reverse recovery time (NOTE 1) Typical junction capacitance (NOTE 2) Typical thermal resistance (NOTE 3) Operating junction and storage temperature range TA=25°C TA=100°C VRRM VRMS VDC I(AV) 50 35 50 100 70 100 200 140 200 400 280 400 2.0 600 420 600 800 560 800 1000 700 1000 Volts Volts Volts Amps IFSM VF IR(AV) 50.0 1.3 1.0 100.0 5.0 150 15.0 55.0 -65 to +175 200 250 500 Amps Volts µA µA ns pF °C/W °C IR trr CJ RΘJA TJ, TSTG NOTES: (1) Measured with IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0 MHZ and applied reverse voltage of 4.0 VDC (3) Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length, P.C.B. mounted 4/98 RATINGS AND CHARACTERISTIC CURVES RG2A AND RG2M FIG. 1 - FORWARD CURRENT DERATING CURVE FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 2.0 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES RESISTIVE OR INDUCTIVE LOAD 50 TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 1.5 Ipk/IAV=π 40 30 1.0 CAPACITANCE LOAD 5.0 Ipk/IAV= 10 20 0.375" (9.5mm) LEAD LENGTH 20 0.5 10 0 25 50 75 100 125 150 175 0 1 10 NUMBER OF CYCLES AT 60 HZ 100 AMBIENT TEMPERATURE, °C FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 20 10 INSTANTANEOUS FORWARD CURRENT, AMPERES INSTANTANEOUS REVERSE CURRENT, MICROAMPERES 20 10 TJ=125°C 1 TJ=25°C PULSE WIDTH=300µs 1% DUTY CYCLE 1 0.1 TJ=75°C 0.1 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0.01 0 20 40 TJ=25°C INSTANTANEOUS FORWARD VOLTAGE, VOLTS 60 80 100 PERCENTAGE OF RATED PEAK REVERSE VOLTAGE, % FIG. 5 - TYPICAL JUNCTION CAPACITANCE 30 JUNCTION CAPACITANCE, pF TJ=25°C f=1.0 MHz Vsig=50mVp-p max. 10 1 1 10 REVERSE VOLTAGE, VOLTS 100