RGF1K

RGF1A THRU RGF1M SURFACE MOUNT GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIER Reverse Voltage - 50 to 1000 Volts * E DO-214BA MODIFIED J-BEND Forward Current - 1.0 Ampere FEATURES ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ Ideal for surface mount automotive applications ♦ High temperature metallurgically bonded construction ♦ Glass passivated cavity-free junction ♦ Capable of meeting environmental standards of MIL-S-19500 ♦ Built-in strain relief ♦ Easy pick and place ♦ Fast switching for high efficiency ♦ High temperature soldering guaranteed: 450°C/5 seconds at terminals ♦ Complete device submersible temperature of 265°C for 10 seconds in solder bath P A T E 0.060 (1.52) 0.040 (1.02) N T D 0.187 (4.75) 0.167 (4.24) 0.0105 (0.27) 0.0065 (0.17) 0.118 (3.00) 0.106 (2.69) 0.108 (2.74) 0.098 (2.49) 0.060 (1.52) 0.030 (0.76) 0.152 TYP. 0.006 0.226 (5.74) 0.196 (4.98) 0.114 (2.90) 0.094 (2.39) Patent No. 3,996,602, brazed-lead assembly by Patent No. 3,930,306 and lead forming by Patent No. 5,151,846 ® *Glass-plastic encapsulation technique is covered by Dimensions in inches and (millimeters) MECHANICAL DATA Case: JEDEC DO-214BA molded plastic over glass body Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.0048 ounce, 0.120 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS RGF1A RGF1B RGF1D RGF1G RGF1J RGF1K RGF1M UNITS Device Marking Code Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at TL=120°C Peak forward surge current 8.3ms single half sinewave superimposed on rated load (JEDEC method) Maximum instantaneous forward voltage at 1.0A Maximum full load reverse current, full cycle average, TA=55°C Maximum DC reverse current at rated DC blocking voltage TA=25°C TA=125°C VRRM VRMS VDC I(AV) IFSM VF IR(AV) IR trr CJ RΘJA RΘJL TJ, TSTG RA 50 35 50 RB 100 70 100 RD 200 140 200 RG 400 280 400 1.0 30.0 1.30 50.0 5.0 100 RJ 600 420 600 RK 800 560 800 RM 1000 700 1000 Volts Volts Volts Amp Amps Volts µA µA Maximum reverse recovery time (NOTE 1) Typical junction capacitance (NOTE 2) Typical thermal resistance (NOTE 3) Operating junction and storage temperature range 150 8.5 85.0 28.0 -65 to +175 250 500 ns pF °C/W °C NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0 MHz and applied Vr=4.0 Volts (3) Thermal resistance from junction to ambient and from junction to lead P.C.B. mounted on 0.2 x 0.2” (5.0 x 5.0mm) copper pad areas 4/98 RATINGS AND CHARACTERISTIC CURVES RGF1A THRU RGF1M AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG. 1 - FORWARD CURRENT DERATING CURVE 60 HZ RESISTIVE OR INDUCTIVE LOAD P.C.B. MOUNTED on 0.2 x 0.2” (5.0 x 5.0mm) COPPER PAD AREAS FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 30 PEAK FORWARD SURGE CURRENT, AMPERES 1 25 20 15 10 5 0 TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 0.5 0 100 110 120 130 140 150 160 175 LEAD TEMPERATURE, °C 1 10 NUMBER OF CYCLES AT 60 Hz 100 FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 10 10 INSTANTANEOUS FORWARD CURRENT, AMPERES INSTANTANEOUS REVERSE CURRENT, MICROAMPERES FIG. 4 - TYPICAL REVERSE CHARACTERISTICS TJ=125°C TJ=25°C 1 PULSE WIDTH=300µs 1% DUTY CYCLE 1 TJ=100°C 0.1 0.1 TJ=25°C 0.01 0.01 0.4 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, % 0.6 0.8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG. 5 - TYPICAL JUNCTION CAPACITANCE FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE TRANSIENT THERMAL IMPEDANCE (°C/W) 100 JUNCTION, CAPACITANCE, pF TJ=25°C f=1.0 MHZ Vsig=50mVp-p 100 MOUNTED ON 0.2 x 0.2” (5 x 7mm) COPPER PAD AREAS 10 10 1 1 1 10 REVERSE VOLTAGE, VOLTS 100 0.1 0.01 0.1 1 t, PULSE DURATION, sec 10 100