RGP02-16E

RGP02-12E THRU RGP02-20E GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIER Reverse Voltage - 1200 to 2000 Volts * D CASE STYLE GP10E Forward Current - 0.5 Ampere FEATURES ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ High temperature metallurgically bonded construction ♦ Capable of meeting environmental standards of MIL-S-19500 ♦ For use in high frequency rectifier circuits ♦ Fast switching for high efficiency ♦ Glass passivated cavity-free junctions ♦ 0.5 Ampere operation at TA=55°C with no thermal runaway ♦ Typical IR less than 0.2µA ♦ High temperature soldering guaranteed: 350°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension P A T E N T E 1.0 (25.4) MIN. 0.107 (2.7) 0.080 (2.0) DIA. 0.205 (5.2) 0.160 (4.1) 1.0 (25.4) MIN. 0.026 (0.66) 0.023 (0.58) DIA. Dimensions in inches and (millimeters) *Glass-plastic encapsulation technique is covered by Patent No. 3,996,602 and brazed-lead assembly by Patent No. 3,930,306 MECHANICAL DATA Case: Molded plastic over glass body Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.012 ounce, 0.3 gram ® MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS RGP02 -12E RGP02 -14E RGP02 -16E RGP02 -18E RGP02 -20E UNITS Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=55°C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at 0.1A Maximum DC reverse current at rated DC blocking voltage Typical junction capacitance (NOTE 2) Typical thermal resistance (NOTE 3) Operating junction and storage temperature range TA=25°C TA=125°C VRRM VRMS VDC I(AV) IFSM VF IR trr CJ RΘJA RΘJL TJ, TSTG 1200 840 1200 1400 980 1400 1600 1120 1600 0.5 20.0 1.8 5.0 50.0 300.0 5.0 65.0 30.0 -65 to +175 1800 1260 1800 2000 1400 2000 Volts Volts Volts Amp Amps Volts µA ns pF °C/W °C Maximum reverse recovery time (NOTE 1) NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5mm) lead length, P.C.B. mounted 4/98 RATINGS AND CHARACTERISTIC CURVES RGP02-12E THRU RGP02-20E FIG. 1 - FORWARD CURRENT DERATING CURVE AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 0.5 0.4 0.3 0.2 0.1 0.375" (9.5mm) LEAD LENGTH PEAK FORWARD SURGE CURRENT, AMPERES RESISTIVE OR INDUCTIVE LOAD 25 TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 20 15 10 5 0 25 50 75 100 125 150 175 0 AMBIENT TEMPERATURE, °C 1 10 NUMBER OF CYCLES AT 60 HZ 100 FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 1 INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT, AMPERES FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 20 10 TJ=125°C 0.1 TJ=25°C PULSE WIDTH=300µs 1% DUTY CYCLE 1 TJ=75°C 0.01 0.001 0.8 0.1 TJ=25°C 1.0 1.2 1.4 1.6 1.8 2 2.2 2.4 INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG. 5 - TYPICAL JUNCTION CAPACITANCE 0.01 0 20 40 60 80 100 10 JUNCTION CAPACITANCE, pF TJ=25°C f=1.0 MHZ Vsig=50mVp-p PERCENT OF RATED PEAK REVERSE VOLTAGE, % 1 1 10 REVERSE VOLTAGE, VOLTS 100