RGP20A

RGP20A THRU RGP20J GLASS PASSIVATED JUNCTION FAST SWITCHING PLASTIC RECTIFIER Reverse Voltage - 50 to 600 Volts * D Forward Current - 2.0 Amperes FEATURES ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ High temperature metallurgically bonded construction ♦ Glass passivated cavity-free junction ♦ Capable of meeting environmental standards of MIL-S-19500 ♦ Fast switching for high efficiency ♦ 2.0 Ampere operation at TA=55°C with no thermal runaway ♦ Typical IR less than 0.2µA ♦ High temperature soldering guaranteed: 350°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension T E P A T E N Case Style GP20 1.0 (25.4) MIN. 0.210 (5.3) 0.190 (4.8) DIA. 0.375 (9.5) 0.285 (7.2) 1.0 (25.4) MIN. 0.042 (1.07) 0.037 (0.94) DIA. MECHANICAL DATA Case: Molded plastic over solid glass body Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.03 ounce, 0.8 gram Dimensions in inches and (millimeters) *Glass-plastic encapsulation technique is covered by Patent No. 3,996,602 and brazed-lead assembly by Patent No. 3,930,306 ® MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS RGP 20A RGP 20B RGP 20D RGP 20G RGP 20J UNITS Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=55°C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at 2.0A Maximum DC reverse current at rated DC blocking voltage TA=25°C TA=125°C VRRM VRMS VDC I(AV) IFSM VF IR IR(AV) trr CJ RΘJA TJ, TSTG 50 35 50 100 70 100 200 140 200 2.0 80.0 1.3 5.0 100.0 100.0 150.0 35.0 22.0 -65 to +175 400 280 400 600 420 600 Volts Volts Volts Amps Amps Volts µA µA Maximum full load reverse current, full cycle average, 0.375" (9.5mm) lead length at TA=55°C Maximum reverse recovery time (NOTE 1) Typical junction capacitance (NOTE 2) Typical thermal resistance (NOTE 3) Operating junction and storage temperature range 250 ns pF °C/W °C NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length, P.C.B. mounted 4/98 RATINGS AND CHARACTERISTIC CURVES RGP20A THRU RGP20J AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG. 1 - FORWARD CURRENT DERATING CURVE PEAK FORWARD SURGE CURRENT, AMPERES 2.0 FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT RESISTIVE OR INDUCTIVE LOAD 100 TA=55°C 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 1.5 1.0 0.5 0.375" (9.5mm) LEAD LENGTH 0 0 25 50 75 100 125 150 175 10 1 10 NUMBER OF CYCLES AT 60 Hz 100 AMBIENT TEMPERATURE, °C FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 10 INSTANTANEOUS FORWARD CURRENT, AMPERES 20 10 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES TJ=125°C 1 TJ=25°C PULSE WIDTH=300µs 1% DUTY CYCLE TJ=100°C 1 0.1 TJ=75°C 0.1 TJ=25°C 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 0.01 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, % 100 JUNCTION CAPACITANCE, pF TJ=25°C f=1.0 MHZ Vsig=50mVp-p TRANSIENT THERMAL IMPEDANCE, °C/W FIG. 5 - TYPICAL JUNCTION CAPACITANCE FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE 100 10 1 10 0.1 0.01 0.1 1 10 100 5 1 10 REVERSE VOLTAGE, VOLTS 100 t, PULSE DURATION, sec.