RMPG06D

RMPG06A THRU RMPG06J MINIATURE GLASS PASSIVATED JUNCTION FAST SWITCHING PLASTIC RECTIFIER Reverse Voltage - 50 to 600 Volts Case Style MPG06 Forward Current - 1.0 Ampere FEATURES ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ Low forward voltage drops, high current capability ♦ Glass passivated chip junction ♦ High surge capability ♦ Typical IR less than 0.1µA ♦ High temperature soldering guaranteed: 250°C/10 seconds 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension 0.100 (2.54) 0.090 (2.29) DIA 1.0 (25.4) MIN. 0.125 (3.18) 0.115 (2.92) MECHANICAL DATA 1.0 (25.4) MIN. 0.025 (0.635) 0.023 (0.584) DIA. Dimensions are in inches and (millimeters) Case: Molded plastic over passivated chip Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.0064 ounce, 0.181 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS RMPG 06A RMPG 06B RMPG 06D RMPG 06G RMPG 06J UNITS Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current, 0.375" (9.5mm) lead length at TA=25°C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at 1.0A Maximum DC reverse current at rated DC blocking voltage Typical junction capacitance (NOTE 1) VRRM VRMS VDC I(AV) 50 35 50 100 70 70 200 140 200 1.0 400 280 400 600 420 600 Volts Volts Volts Amp IFSM VF IR CJ trr 40.0 1.3 5.0 50.0 6.6 150 67.0 30.0 -55 to +150 200 Amps Volts µA pF ns °C/W °C TA=25°C TA=125°C Typical reverse recovery time (NOTE 2) Typical thermal resistance (NOTE 3) Operating junction and storage temperature range RΘJA RΘJL TJ, TSTG NOTES: (1) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (2) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (3) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5mm) lead length, P.C.B. mounted with 0.22 x 0.22” (5.5 x 5.5mm) copper pads 4/98 RATINGS AND CHARACTERISTIC CURVES RMPG06A THRU RMPG06J FIG. 1 - FORWARD CURRENT DERATING CURVES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 1.2 1.0 0.8 0.6 0.4 0.2 0 CAPACITANCE LOADS 5.0 Ipk/IAV= 10 20 RESISTIVE OR INDUCTIVE LOAD 0.375" (9.5mm) LEAD LENGTH 50 PEAK FORWARD SURGE CURRENT, AMPERES TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 40 30 20 10 0 RATED LOAD NO LOAD CONDITION 0 25 50 75 100 125 150 175 AMBIENT TEMPERATURE, °C 1 10 NUMBER OF CYCLES AT 60 HZ 100 FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 30 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES TJ=125°C 10 TJ=125°C 10 INSTANTANEOUS FORWARD CURRENT, AMPERES 1 TJ=75°C 1 PULSE WIDTH=300µs 1% DUTY CYCLE 0.1 TJ=25°C TJ=25°C 0.1 0.01 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, % 0.01 0.4 0.6 0.8 1 1.0 1.2 1.4 1.6 1.8 INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE FIG. 5 - TYPICAL JUNCTION CAPACITANCE TRANSIENT THERMAL IMPEDANCE, °C/W 100 30 JUNCTION CAPACITANCE, pF TJ=25°C f=1.0 MHZ Vsig=50mVp-p 10 10 1 0.1 0.01 0.1 1 10 100 1 t, PULSE DURATION, sec. 1 10 REVERSE VOLTAGE, VOLTS 100