RS2A

RS2A THRU RS2K SURFACE MOUNT FAST SWITCHING RECTIFIER Reverse Voltage - 50 to 800 Volts DO-214AA MODIFIED J-BEND Forward Current - 1.5 Amperes FEATURES ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ For surface mount applications ♦ Low profile package ♦ Built-in strain relief, ideal for automated placement ♦ Glass passivated chip junction ♦ Fast switching for high efficiency ♦ High temperature soldering: 250°C/10 seconds at terminals 0.086 (2.20) 0.077 (1.95) 0.155 (3.94) 0.130 (3.30) 0.180 (4.57) 0.160 (4.06) 0.012 (0.305) 0.006 (0.152) 0.096 (2.44) 0.084 (2.13) MECHANICAL DATA 0.008 (0.203) MAX. 0.220 (5.59) 0.205 (5.21) 0.060 (1.52) 0.030 (0.76) Case: JEDEC DO-214AA molded plastic over passivated chip Terminals: Solder plated solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode band end Weight: 0.003 ounce, 0.093 gram Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS RS2A RS2B RS2D RS2G RS2J RS2K UNITS Device marking code Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at TL=100°C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at 1.5A Maximum DC reverse current at rated DC blocking voltage Maximum reverse recovery time (NOTE 1) Typical junction capacitance (NOTE 2) Typical thermal resistance (NOTE 3) Operating junction and storage temperature range NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25 (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to ambient and junction to lead P.C.B. mounted on 0.27 x 0.27” (7.0 x 7.0mm) copper pad areas RA VRRM VRMS VDC I(AV) 50 35 50 RB 100 70 100 RD 200 140 200 1.5 RG 400 280 400 RJ 600 420 600 RK 800 560 800 Volts Volts Volts Amps IFSM VF IR trr CJ RΘJA RΘJL TJ, TSTG 150 50.0 1.30 5.0 200.0 250 50.0 55.0 18.0 -55 to 150 500 Amps Volts µA ns pF °C/W °C TA=25°C TA=125°C 4/98 RATINGS AND CHARACTERISTIC CURVES RS2A THRU RS2K FIG. 1 - FORWARD CURRENT DERATING CURVE PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD CURRENT, AMPERES RESISTIVE OR INDUCTIVE LOAD FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 50 40 30 20 10 0 1.5 TL=100°C 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 1.0 0.5 P.C.B. MOUNTED 0.27 x 0.27” (7.0 x 7.0mm) COPPER PAD AREAS 0 50 60 70 80 90 100110120130140150 160 LEAD TEMPERATURE, °C 1 10 NUMBER OF CYCLES AT 60 HZ 100 FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 20 10 INSTANTANEOUS FORWARD CURRENT AMPERES INSTANTANEOUS REVERSE CURRENT, MICROAMPERES 100 TJ=125°C PULSE WIDTH=300µs 1% DUTY CYCLE TJ=25°C 10 1 1 0.1 TJ=25°C 0.01 0.4 0.1 0.6 0.8 1.0 1.2 1.4 1.6 1.8 0 20 40 60 80 100 INSTANTANEOUS FORWARD VOLTAGE, VOLTS PERCENT OF RATED PEAK REVERSE VOLTAGE, % FIG. 5 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, pF 100 TJ=25°C f=1.0 MHZ Vsig=50mVp-p 10 1 10 REVERSE VOLTAGE, VOLTS 100