SBL1030

SBL1030 AND SBL1040 SCHOTTKY RECTIFIER Reverse Voltage - 30 and 40 Volts TO-220AC 0.185 (4.70) 0.415 (10.54) MAX. 0.370 (9.40) 0.360 (9.14) 0.154 (3.91) DIA. 0.148 (3.74) 0.055 (1.39) 0.045 (1.14) 0.175 (4.44) Forward Current - 10.0 Amperes FEATURES ♦ Plastic package has Underwriters Laboratory Flammability Classifications 94V-0 ♦ Metal silicon junction, majority carrier conduction ♦ Low power loss, high efficiency ♦ High current capability, low forward voltage drop ♦ High surge capability ♦ For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications ♦ Guardring for overvoltage protection ♦ High temperature soldering guaranteed: 250°C/10 seconds, 0.25" (6.35mm) from case 0.113 (2.87) 0.103 (2.62) 0.145 (3.68) 0.135 (3.43) 0.560 (14.22) 0.530 (13.46) 0.410 (10.41) 0.390 (9.91) PIN 1 0.160 (4.06) 0.140 (3.56) 0.560 (14.22) 0.530 (13.46) 2 0.635 (16.13) 0.625 (15.87) 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.110 (2.79) 0.100 (2.54) 0.105 (2.67) 0.095 (2.41) 0.037 (0.94) 0.027 (0.68) 0.022 (0.56) 0.014 (0.36) MECHANICAL DATA CASE PIN 1 0.205 (5.20) 0.195 (4.95) PIN 2 Dimensions in inches and (millimeters) Case: JEDEC TO-220AC molded plastic body Terminals: Leads solderable per MIL-STD-750, Method 2026 Polarity: As marked Mounting Position: Any Mounting Torque: 5 in. - lbs. max. Weight: 0.08 ounces, 2.24 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS SBL1030 SBL1040 UNITS Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at TC=110°C Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at 10A (NOTE 1) Maximum instantaneous reverse current at rated DC blocking voltage (NOTE 1) Typical thermal resistance (NOTE 2) Operating and storage temperature range NOTES: (1) Pulse test: 300µs pulse width, 1% duty cycle (2) Thermal resistance from junction to case per leg VRRM VRMS VDC I(AV) 30 21 30 10.0 40 28 40 Volts Volts Volts Amps IFSM VF IR RΘJC TJ,TSTG 250.0 0.55 1.0 50.0 2.0 -40 to +125 Amps Volts mA °C/W °C TC=25°C TC=100°C 4/98 RATINGS AND CHARACTERISTIC CURVES SBL1030 AND SBL1040 FIG. 1 - FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT, AMPERES 12.5 10 7.5 5 2.5 0 PEAK FORWARD SURGE CURRENT, AMPERES FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT RESISTIVE OR INDUCTIVE LOAD 300 250 200 150 100 50 0 1 TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 10 NUMBER OF CYCLES AT 60 HZ 100 0 50 100 150 CASE TEMPERATURE, °C FIG. 4 - TYPICAL REVERSE CHARACTERISTICS FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 50 50 INSTANTANEOUS FORWARD CURRENT, AMPERES 10 10 TJ=125°C PULSE WIDTH = 300µs 1% DUTY CYCLE INSTANTANEOUS REVERSE CURRENT, MILLIAMPERES TJ=125°C 1 TJ=75°C 1 TJ=25°C 0.1 0.1 0.01 TJ=25°C 0.01 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 0.001 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, % TRANSIENT THERMAL IMPEDANCE, °C/W FIG. 5 - TYPICAL JUNCTION CAPACITANCE FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE 4,000 JUNCTION CAPACITANCE, pF TJ=25°C f=1.0 MHz Vsig=50mVp-p 100 1,000 10.0 1 100 0.1 1 10 100 0.1 0.01 0.1 1 10.0 100 REVERSE VOLTAGE, VOLTS t, PULSE DURATION, sec.