SBL1640CT

SBL1630CT AND SBL1640CT SCHOTTKY RECTIFIER Reverse Voltage - 30 and 40 Volts TO-220AB 0.185 (4.70) 0.175 (4.44) 0.154 (3.91) DIA. 0.148 (3.74) 0.055 (1.39) 0.045 (1.14) Forward Current - 16.0 Amperes FEATURES ♦ Plastic package has Underwriters Laboratory Flammability Classifications 94V-0 ♦ Metal silicon junction, majority carrier conduction ♦ Low power loss, high efficiency ♦ High current capability, low forward voltage drop ♦ High surge capability ♦ For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications ♦ Dual rectifier construction, positive center tap ♦ Guardring for overvoltage protection ♦ High temperature soldering guaranteed: 250°C/10 seconds, 0.25" (6.35mm) from case 0.415 (10.54) MAX. 0.370 (9.40) 0.360 (9.14) 0.113 (2.87) 0.103 (2.62) 0.145 (3.68) 0.135 (3.43) 0.560 (14.22) 0.530 (13.46) 0.410 (10.41) 0.390 (9.91) PIN 2 0.635 (16.13) 0.625 (15.87) 1 0.160 (4.06) 0.140 (3.56) 0.560 (14.22) 0.530 (13.46) 3 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.110 (2.79) 0.100 (2.54) 0.105 (2.67) 0.095 (2.41) 0.037 (0.94) 0.027 (0.68) 0.105 (2.67) 0.095 (2.41) 0.205 (5.20) 0.195 (4.95) 0.022 (0.56) 0.014 (0.35) MECHANICAL DATA PIN 1 PIN 3 PIN 2 CASE Dimensions in inches and (millimeters) Case: JEDEC TO-220AB molded plastic body Terminals: Lead solderable per MIL-STD-750, Method 2026 Polarity: As marked Mounting Position: Any Mounting Torque: 5 in. - lbs. max. Weight: 0.08 ounce, 2.24 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS SBL1630CT SBL1640CT UNITS Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at TC=95°C Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage per leg at 8.0A (NOTE 1) Maximum instantaneous reverse current at rated DC blocking voltage per leg (NOTE 1) Typical thermal resistance per leg (NOTE 2) Operating junction and storage temperature range TC=25°C TC=100°C VRRM VRMS VDC I(AV) 30 21 30 16.0 40 28 40 Volts Volts Volts Amps IFSM 250.0 Amps VF IR RΘJC TJ, TSTG 0.55 0.5 50.0 2.0 -40 to +125 Volts mA °C/W °C NOTES: (1) Pulse test: 300µs pulse width, 1% duty cycle (2) Thermal resistance from junction to case per leg 4/98 RATINGS AND CHARACTERISTIC CURVES SBL1630CT AND SBL1640CT FIG. 1 - FORWARD CURRENT DERATING CURVE PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD CURRENT, AMPERES FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG 20 RESISTIVE OR INDUCTIVE LOAD 300 250 200 150 100 50 0 1 10 NUMBER OF CYCLES AT 60 HZ TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 16 12 8 4 0 0 50 100 150 LEAD TEMPERATURE, °C 100 FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER LEG FIG. 4 - TYPICAL REVERSE CHARACTERISTICS PER LEG 50 50 INSTANTANEOUS FORWARD CURRENT, AMPERES PULSE WIDTH=300µs 1% DUTY CYCLE TJ=125°C 10 INSTANTANEOUS REVERSE CURRENT, MILLIAMPERES TJ=125°C 10 TJ=25°C 1 TJ=75°C 1 0.1 0.1 0.01 TJ=25°C 0.01 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 0.001 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, % FIG. 5 - TYPICAL JUNCTION CAPACITANCE PER LEG TRANSIENT THERMAL IMPEDANCE, °C/W FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE PER LEG 4,000 JUNCTION CAPACITANCE, pF TJ=25°C f=1.0 MHz Vsig=50mVp-p 100 1,000 10 1 100 0.1 1 10 100 REVERSE VOLTAGE, VOLTS 0.1 0.01 0.1 1 t, PULSE DURATION, sec. 10 100