SBL4040PT

*NEW PRODUCT *NEW PRODUCT *NEW PRODUCT SBL4030PT THRU SBL4040PT SCHOTTKY RECTIFIER Reverse Voltage - 30 to 40 Volts TO-247AD 0.645 (16.4) 0.625 (15.9) 0.203 (5.16) 0.193 (4.90) 0.245 (6.2) 0.225 (5.7) 0.323 (8.2) 0.313 (7.9) 10o 30o 0.078 REF (1.98) Forward Current - 40.0 Amperes FEATURES 0.170 (4.3) 0.840 (21.3) 0.820 (20.8) 10o TYP. BOTH SIDES 0.142 (3.6) 0.138 (3.5) 1 2 3 0.086 (2.18) 0.076 (1.93) 1o REF. BOTH SIDES 0.118 (3.0) 0.108 (2.7) 0.127 (3.22) 0.160 (4.1) 0.140 (3.5) 0.795 (20.2) 0.775 (19.6) 0.117 (2.97) ♦ Plastic package has Underwriters Laboratory Flammability Classifications 94V-0 ♦ Dual rectifier construction, positive center-tap ♦ Metal silicon rectifier, majority carrier conduction ♦ Low power loss, high efficiency ♦ High current capability, low forward voltage drop ♦ High surge capability ♦ For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications ♦ Guardring for overvoltage protection ♦ High temperature soldering guaranteed: 250°C/10 seconds, 0.17" (4.3mm) from case 0.048 (1.22) 0.225 (5.7) 0.205 (5.2) 0.044 (1.12) 0.030 (0.76) 0.020 (0.51) PIN 2 CASE MECHANICAL DATA Case: JEDEC TO-247AD molded plastic body Terminals: Lead solderable per MIL-STD-750, Method 2026 Polarity: As marked Mounting Position: Any Mounting Torque: 10 in. - lbs. max. Weight: 0.2 ounce, 5.6 grams PIN 1 PIN 3 Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS SBL4030PT SBL4040PT UNITS Maximum repetitive peak reverse voltage Maximum working peak reverse voltage Maximum DC blocking voltage Maximum average forward rectified current at TC=100°C Peak repetitive forward current per leg at TC=95°C (rated VR square wave, 20 KHZ) Peak forward surge current, 8.3ms single half sinewave superimposed on rated load (JEDEC Method) Peak repetitive reverse surge current (NOTE1) Maximum instantaneous forward voltage per leg at IF=20A, TC=25°C IF=20A, TC=100°C (NOTE 2) Maximum instantaneous reverse current at TC=25°C rated DC blocking voltage per leg (NOTE 2) TC=100°C Typical thermal resistance per leg (NOTE 3) Voltage rate of change (rated VR) Operating junction storage temperature range NOTES: (1) 2.0µs pulse width, f=1.0 KHZ (2) Pulse test: 300µs pulse width, 1% duty cycle (3) Thermal resistance from junction to case per leg VRRM VRMS VDC I(AV) IFRM IFSM IRRM VF 30 21 30 40.0 40.0 400.0 2.0 0.58 0.50 10.0 100.0 1.2 1,000 -40 to +125 40 28 40 Volts Volts Volts Amps Amps Amps Amps Volts IR RΘJC dv/dt TJTSTG mA °C/W V/µs °C 4/98 RATINGS AND CHARACTERISTIC CURVES SBL4030PT THRU SBL4040PT FIG. 1 - FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT, AMPERES FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG PEAK FORWARD SURGE CURRENT, AMPERES 50 40 30 20 10 0 400 300 200 0 50 100 150 100 1 10 NUMBER OF CYCLES AT 60 HZ 100 CASE TEMPERATURE, °C FIG. 3 - TYPICAL REVERSE CHARACTERISTICS PER LEG FIG. 4 - TYPICAL REVERSE CHARACTERISTICS PER LEG 50 50 INSTANTANEOUS FORWARD CURRENT, AMPERES 10 10 TJ=100°C INSTANTANEOUS REVERSE CURRENT, MILLIAMPERES TJ=100°C 1 TJ=25°C 1 0.1 0.1 TJ=25°C 0.01 0.01 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 0.001 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, % FIG. 5 - TYPICAL JUNCTION CAPACITANCE PER LEG TRANSIENT THERMAL IMPEDANCE, °C/W FIG . 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE PER LEG 5,000 JUNCTION CAPACITANCE, pF 100 10 1,000 1 100 0.1 1 10 100 0.1 0.01 0.1 1 10 100 REVERSE VOLTAGE, VOLTS t, PULSE DURATION, sec.