SL23

NEW PRODUCT NEW PRODUCT NEW PRODUCT SL22 AND SL23 LOW VF SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER Reverse Voltage - 20 to 30 Volts DO-214AA Forward Current - 2.0 Amperes FEATURES ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ For surface mounted applications ♦ Low profile package ♦ Built-in strain relief ♦ Metal silicon junction, majority carrier conduction ♦ Low power loss, high efficiency ♦ High current capability, low forward voltage drop ♦ High surge capability ♦ For use in low voltage high frequency inverters, free wheeling, and polarity protection applications ♦ Guardring for overvoltage protection ♦ High temperature soldering guaranteed: 250°C/10 seconds at terminals 0.086 (2.20) 0.077 (1.95) 0.155 (3.94) 0.130 (3.30) 0.180 (4.57) 0.160 (4.06) 0.012 (0.305) 0.006 (0.152) 0.096 (2.44) 0.084 (2.13) MECHANICAL DATA 0.060 (1.52) 0.030 (0.76) 0.220 (5.59) 0.205 (5.21) 0.008 (0.203) MAX. Dimensions in inches and (millimeters) Case: JEDEC DO-214AA molded plastic body Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Weight: 0.003 ounce, 0.093 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS SL22 SL23 UNITS Device marking code Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at TL (SEE FIG. 1) Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at: IF=1.0A, TA=125°C (NOTE 1) IF=1.0A, TA=25°C IF=2.0A, TA=125°C IF=2.0A, TA=25°C Maximum DC reverse current (NOTE 1) TA=25°C at rated DC blocking voltage TA=100°C Maximum thermal resistance (NOTE 2) Operating junction temperature range Storage temperature range NOTES: (1) Pulse test: 300µs pulse width, 1% duty cycle (2) P.C.B. mounted with 0.2 x 0.2” (5.0 x 5.0mm) copper pad areas L2 VRRM VRMS VDC I(AV) 20 14 20 2.0 L3 30 21 30 Volts Volts Volts Amps IFSM 60 Amps VF 0.280 0.395 0.320 0.440 0.4 10.0 75 17 -55 to +125 -55 to +150 Volts IR RΘJA RΘJL TJ TSTG mA °C/W °C °C 4/98 RATINGS AND CHARACTERISTIC CURVES SL22 AND SL23 FIG. 1 - FORWARD CURRENT DERATING CURVE PEAK FORWARD SURGE CURRENT, AMPERES FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 2.0 AVERAGE FORWARD CURRENT, AMPERES 70 60 60 1.5 50 40 30 20 10 0 1 2 3 5 10 20 30 50 100 1.0 0.5 0 50 60 70 80 90 100 110 120 130 140 150 160 NUMBER OF CYCLES AT 60HZ LEAD TEMPERATURE,°C FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 50 100 TJ=125°C TJ=25°C FIG. 4 - TYPICAL REVERSE CURRENT CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT AMPERES 10.0 INSTANTANEOUS REVERSE CURRENT, MILLIAMPERES 10 1 TA=100°C 1 0.1 0.1 0.01 TA=25°C 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0.001 0 20 40 60 80 100 INSTANTANEOUS FORWARD VOLTAGE VOLTS PERCENT OF RATED PEAK REVERSE VOLTAGE, % FIG. 5 - TYPICAL JUNCTION CAPACITANCE 5000 JUNCTION CAPACITANCE, pF 1000 100 0.1 1 10 100 REVERSE VOLTAGE, VOLTS