UGB10FCT

ADVANCED INFORMATION ADVANCED INFORMATION ADVANCED INFORMATION UGB10FCT AND UGB10GCT ULTRAFAST SOFT RECOVERY RECTIFIER Reverse Voltage - 300-400 Volts Forward Current - 10.0 Amperes TO-263AB FEATURES ♦ Plastic package has Underwriters Laboratories Flammability Classification 94V-0 ♦ Ideally suited for free wheeling diode power factor correction applications ♦ Soft recovery characteristics ♦ Excellent high temperature switching ♦ Optimized to reduce switching losses ♦ High temperature soldering in accordance with CECC 802 / Reflow guaranteed ♦ Glass passivated chip junction MECHANICAL DATA Case: JEDEC TO-263AB molded plastic body Terminals: Plated leads, solderable per MIL-STD-750, Method 2026 Polarity: As marked Mounting Position: Any Mounting Torque: 5 in. - lbs. max. Weight: 0.08 ounce, 2.24 grams Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS UGB10FCT UGB10GCT UNITS Maximum repetitive peak reverse voltage Working peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at TC=100°C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) per leg Maximum instantaneous forward voltage per leg IF= 5A Maximum reverse leakage current at working peak reverse voltage Maximum Reverse recovery time per leg at IF=1.0A, di/dt=100A/µs, VR=30V, Irr=0.1 IRM Maximum reverse recovery time per leg at IF=0.5A, IR=1.0A, Irr=0.25A Maximum reverse recovery current per leg at IF=5A, di/dt=50A/µs,VR=30V TC=100°C Maximum stored charge per leg IF=2A, di/dt=20A/µs, VR=30V, Irr=0.1 IRM Typical thermal resistance from junction to case per leg Operating junction and storage temperature range NOTE: (1) Pulse test: 300µs pulse width, 1% duty cycle NOTICE: Advanced product information is subject to change without notice VRRM VRWM VRMS VDC I(AV) IFSM TJ=25°C TJ=150°C TJ=25°C TJ=100°C 300 225 210 300 10 60A 1.30 1.05 10 200 50 35 3.0 50 400 300 280 400 Volts Volts Volts Volts Amps Amps VF IR trr trr IRM Qrr RΘJC TJ, TSTG Volts µA ns ns Amps nC °C/W °C 4.5 -40 to +150 4/98 RATINGS AND CHARACTERISTIC CURVES UGB10FCT AND UGB10GCT 001 PEAK FORWARD SURGE CURRENT, AMPERES INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES CAPACITANCE, pF FIG. 1 -FORWARD CURRENT DERATING CURVE RESISTIVE OR INDUCTIVE LOAD FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) TC=105°C AVERAGE FORWARD CURRENT, AMPERES CASE TEMPERATURE, °C NUMBER OF CYCLES AT 60 HZ FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER LEG TJ=25°C PULSE WIDTH=300µs 1% DUTY CYCLE FIG. 4 - TYPICAL REVERSE CHARACTERISTICS PER LEG INSTANTANEOUS FORWARD CURRENT, AMPERES TJ=125°C TJ=125°C TJ=100°C TJ=100°C TJ=25°C TJ=25°C INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG. 5 - REVERSE SWITCHING CHARACTERISTICS PER LEG @5A, 50A/µs PERCENT OF RATED PEAK REVERSE VOLTAGE, % FIG. 6 - TYPICAL JUNCTION CAPACITANCE PER LEG TJ=125°C f=1.0 MHz Vsig=50MVp-p STORED CHARGE/REVERSE RECOVERY TIME, nC/ns @5A, 50A/µs @2A, 20A/µs JUNCTION TEMPERATURE, °C REVERSE VOLTAGE, VOLTS 000,1 001 01 1 521 001 @1A, 100A/µs 1.0 1 trr Qrr 01 @2A, 20A/µs 001 001 08 06 01 04 02 1 01 1.0 001 000,1 1 001 1 01 6.1 051 4.1 521 2.1 001 1 57 57 8.0 05 6.0 05 4.0 52 52 0 2.0 001 051 002 052 003 05 1 0 01 1.0 001 10.0 5 0 51 01 3