UGF10GCT

NEW PRODUCT NEW PRODUCT NEW PRODUCT UGF10FCT AND UGF10GCT ULTRAFAST SOFT RECOVERY RECTIFIER Reverse Voltage - 300 to 400 Volts ITO-220AB 0.405 (10.27) 0.383 (9.72) 0.188 (4.77) 0.172 (4.36) 0.110 (2.80) 0.100 (2.54) 0.140 (3.56) DIA. 0.130 (3.30) 0.131 (3.39) DIA. 0.122 (3.08) Forward Current - 10.0 Amperes FEATURES ♦ Plastic package has Underwriters Laboratories Flammability Classification 94V-0 ♦ Ideally suited for free wheeling diode power factor correction applications ♦ Soft recovery characteristics ♦ Excellent high temperature switching ♦ Optimized to reduce switching losses ♦ High temperature soldering guaranteed: 250°C, 0.25" (6.35mm) from case for 10 seconds ♦ Glass passivated chip junction 0.600 (15.5) 0.580 (14.5) PIN 1 2 3 0.670 (17.2) 0.646 (16.4) 0.350 (8.89) 0.330 (8.38) 0.191 (4.85) 0.171 (4.35) 0.560 (14.22) 0.530 (13.46) 0.060 (1.52) 0.110 (2.80) 0.100 (2.54) MECHANICAL DATA Case: ITO-220AB molded plastic body Terminals: Plated leads, solderable per MIL-STD-750, Method 2026 Polarity: As marked Mounting Position: Any Weight: 0.08 ounce, 2.24 grams Mounting Torque: 5 in. - lbs. max. 0.037 (0.94) 0.027 (0.69) 0.105 (2.67) 0.095 (2.41) 0.022 (0.55) 0.014 (0.36) PIN 1 PIN 3 PIN 2 0.205 (5.20) 0.195 (4.95) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS UGF10FCT UGF10GCT UNITS Maximum repetitive peak reverse voltage Working peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at TC=100°C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) per leg Maximum instantaneous forward voltage per leg IF= 5A Maximum reverse leakage current at working peak reverse voltage Maximum Reverse recovery time per leg at IF=1.0A, di/dt=100A/µs, VR=30V, Irr=0.1 IRM Maximum reverse recovery current per leg at IF=5A, di/dt=50A/µs,VR=30V Maximum stored charge per leg IF=2A, di/dt=20A/µs, VR=30V, Irr=0.1 IRM Typical thermal resistance from junction to case per leg Operating junction and storage temperature range TJ=25°C TJ=150°C TJ=25°C TJ=100°C VRRM VRWM VRMS VDC I(AV) IFSM 300 225 210 300 10 60A 1.30 1.05 10 200 35 50 3.0 50 400 300 280 400 Volts Volts Volts Volts Amps Amps VF IR trr trr Volts µA ns ns Amps nC °C/W °C Maximum reverse recovery time per leg at IF=0.5A, IR=1.0A, Irr=0.25A TC=100°C IRM Qrr RΘJC TJ, TSTG 6.0 -40 to +150 4/98 RATINGS AND CHARACTERISTIC CURVES UGF10FCT AND UGF10GCT FIG. 1 -FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT, AMPERES FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG 15 RESISTIVE OR INDUCTIVE LOAD 100 PEAK FORWARD SURGE CURRENT, AMPERES 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) TC=105°C 10 10 5 0 1 0 25 50 75 100 125 150 CASE TEMPERATURE, °C 1 10 NUMBER OF CYCLES AT 60 HZ 100 FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER LEG 100 FIG. 4 - TYPICAL REVERSE CHARACTERISTICS PER LEG INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES TJ=25°C PULSE WIDTH=300µs 1% DUTY CYCLE 1,000 INSTANTANEOUS FORWARD CURRENT, AMPERES TJ=125°C 10 TJ=125°C 100 TJ=100°C 1 TJ=100°C 10 0.1 TJ=25°C 1 TJ=25°C 0.1 0.01 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 20 40 60 80 100 INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG. 5 - REVERSE SWITCHING CHARACTERISTICS PER LEG PERCENT OF RATED PEAK REVERSE VOLTAGE, % FIG. 6 - TYPICAL JUNCTION CAPACITANCE PER LEG STORED CHARGE/REVERSE RECOVERY TIME, nC/ns 300 250 200 @5A, 50A/µs 100 TJ=125°C f=1.0 MHz Vsig=50MVp-p @2A, 20A/µs CAPACITANCE, pF 150 100 50 @1A, 100A/µs @2A, 20A/µs 10 @5A, 50A/µs trr Qrr 0 25 50 75 100 125 1 0.1 1 10 100 1,000 JUNCTION TEMPERATURE, °C REVERSE VOLTAGE, VOLTS