ECLAMP2357NQTLT

EClamp2357NQ EMIClamp® EMI Filter and ESD Protection For SD Card Interfaces PROTECTION PRODUCTS Description Features The EClamp®2357NQ is a low pass filter array with integrated TVS diodes. It is designed to suppress unwanted EMI/RFI signals and provide electrostatic discharge (ESD) protection in portable electronic equipment. They have been optimized for protection of touch screen displays, secure digital (SD) card interfaces, and color LCD panels in cellular phones and other portable electronics. • EMI/RFI filter with integrated ESD protection • ESD protection to IEC 61000-4-2 (ESD) Level 4, ±20kV (air), ±12kV (contact) • Filter performance: >30dB attenuation at 1.8GHz • TVS working voltage: 2.5V • Resistor: 100Ω +/− 15% • Capacitance: 10pF typ. (VR = 0V for non filter pins) • EMI & ESD protection for six lines • Dedicated ESD protection for four lines • Solid-state technology • AEC-Q100 Grade 1 Qualified The device consists of six π filter circuits comprised of TVS diodes for ESD protection, and a resistor capacitor network for EMI/RFI filtering. A series resistor value of 100Ω and a component capacitance value of 10pF are used to achieve 20dB minimum attenuation from 1.0GHz to 3GHz. The device also includes 4 discrete TVS diodes for dedicated ESD protection. All of the TVS diodes provide effective suppression of ESD voltages in excess of ±20kV (air discharge) and ±12kV (contact discharge) per IEC 61000-4-2, level 4. The EClamp2357NQ is qualified to AEC-Q100 Grade 1 for automotive use. Package Dimensions Mechanical Characteristics • • • • • • • SLP3030P16 package Pb-Free, Halogen Free, RoHS/WEEE compliant Nominal Dimensions: 3.0 x 3.0 x 0.6 mm Lead Pitch: 0.5mm Lead Finish: Matte Tin Marking: Marking Code Packaging: Tape and Reel per EIA 481 Applications • • • • • • Touch Screen Display Interfaces Secure Digital (SD) Memory Card Interfaces Multimedia Card Interfaces (MCI) Color LCD Panel Protection Cell Phone Handsets and Accessories Automotive Applications Schematic & Pin Configuration 100Ω IN 3.00 10pF 16 OUT 10pF 1 0.30 3.00 GND 6x {R = 100Ω, C = 10pF (max)} IN/OUT IN/OUT 0.50 0.60 GND Nominal Dimensions (in mm) EClamp2357NQ Final Datasheet Sep 20, 2017 Rev 2.0 EClamp2357NQ-1-R0 2x 5V TVS www.semtech.com Page 1 Semtech Absolute Maximum Ratings Rating Symbol Value Units ESD per IEC 61000-4-2 (Contact)(1) ESD per IEC 61000-4-2 (Air)(1) VESD ±12 ±20 kV Junction Temperature TJ 125 O Operating Temperature TOP -40 to +125 O Storage Temperature TSTG -55 to +150 O C C C Electrical Characteristics (T=25OC unless otherwise specified) Parameter Symbol Conditions Reverse Stand-Off Voltage VRWM Min. Typ. -40OC to 125OC, any I/O to GND Max. Units 2.5 V 10 V 0.5 μA 100 115 Ω VR = 0V 20 22 VR = 2.5V 12 15 Reverse Breakdown Voltage VBR It = 1mA, any I/O to GND -40 C to 125 C Reverse Leakage Current IR VRWM = 2.5V, any I/O to GND -40OC to 125OC Total Series Resistance R Each line, T = -40 OC to 125 OC Total Capacitance CIN Input to Gnd, each Line, f = 1 MHz O O 6 85 8 pF Notes: (1): ESD Gun return path to Ground Reference Plane (GRP) EClamp2357NQ Final Datasheet Sep 20, 2017 Rev 2.0 www.semtech.com Page 2 Semtech Typical Characteristics Typical Insertion Loss -S21 (Each Filter) Analog Crosstalk (Each Line) 0 0 -10 TA = 25OC Filter Input to Output Crosstalk - CT (dB) Insertion Loss -IL (dB) TA = 25OC -20 -20 -30 -40 -60 -80 -40 -100 AR_ILvF CTvF -50 10 100 1000 Frequency (MHz) 10000 -120 10 ESD Clamping (+8kV Contact per IEC 61000-4-2) 150 Frequency (MHz) 1000 10000 ESD Clamping (-8kV Contact per IEC 61000-4-2) 50 TA = 25OC Corrected for 40dB attenuation. Measured with 50Ω, 40dB attenuator; 50Ω Scope Input Impedance. Clamping Voltage - VC (V) 100 Clamping Voltage - VC (V) 100 50 0 -50 TA = 25OC Corrected for 40dB attenuation. Measured with 50Ω, 40dB attenuator; 50Ω Scope Input Impedance. -100 0 AR_ESD_+8 AR_ESD_-8 -150 -50 -10 10 30 Time (ns) 50 -10 70 10 Capacitance vs. Temperature 30 Time (ns) 50 70 Series Resistance vs. Temperature 25 105 Test Current = 1mA 104 No Filter VR = 0V No Filter VR = 2.5V Series Resistance - RS (Ω) Junction Capacitance - CJ (pF) 20 Filter VR = 0V 15 Filter VR = 2.5V 10 103 102 101 5 AR_RSvT AR_CAPvT 100 0 -50 0 EClamp2357NQ Final Datasheet Sep 20, 2017 Rev 2.0 50 Temperature (OC) 100 150 -50 www.semtech.com 0 50 Temperature (OC) 100 150 Page 3 Semtech Typical Characteristics (Continued) Breakdown Voltage vs. Temperature Capacitance vs. Reverse Voltage 25 8.0 IBR = 1mA to GND IAny= Pin 1mA TA = 25OC f = 1 MHz BR Pin 6, 8, 13 or 15 to GND Breakdown Voltage - VBR (V) 7.8 20 Capacitance - CJ(pF) 7.6 7.4 7.2 15 Filter Pins Non Filter Pins 10 5 AR_VBRvT AR_CAPvV 7.0 -50 0 50 Temperature (OC) 100 0 150 0.0 0.5 1.0 1.5 2.0 2.5 Reverse Voltage - V (V) TLP Characteristics (Positive) TLP Characteristics (Negative) 5 30 TA = 25OC TLP Parameters: tp = 100ns; tr = 200ps RDYN = 0.466Ω Best Fit 4A to 16A 25 -5 15 TLP Current (A) TLP Current (A) 20 TA = 25OC TLP Parameters: tp = 100ns; tr = 200ps RDYN = 0.248Ω Best Fit 4A to 16A 0 10 5 -10 -15 -20 -25 0 AR_TLP+ AR_TLP- -30 -5 0 5 10 15 TLP Voltage (V) 20 25 -12 -10 -8 -6 TLP Voltage (V) -4 -2 0 Leakage Current vs. Temperature Leakage Current - IR (nA) 40 30 VR = 3.3V Pin to 6, 8, GND 13 or 15 to GND Filter Pins are 1, 2, 3 ,4, 5, 7, 9, 10, 11, 12, 14 and 16 Non-Filter Pins are: 6, 8, 13 and 15. 20 Non-Filter Pins Filter Pins 10 AR_IRvT 0 -50 0 EClamp2357NQ Final Datasheet Sep 20, 2017 Rev 2.0 50 Temperature (OC) 100 150 www.semtech.com Page 4 Semtech Application Information Device Connection The EClamp2357NQ is comprised of six circuits each consisting of a low pass filter for EMI/RFI suppression and dual TVS diodes for ESD protection. It also includes 4 lines of TVS diodes for ESD protection of power lines or high speed I/O lines. The device is housed in a 16-pin Quad Flat No-Lead (QFN) package. Electrical connection is made via 16 pins located at the bottom of the device. A center tab serves as the ground connection. Pin connections are noted in the table to the right. The device is designed for easy PCB routing as shown in the application examples. All path lengths should be kept as short as possible to minimize the effects of parasitic inductance in the board traces. Matte Tin Lead Finish Matte tin has become the industry standard lead-free replacement for SnPb lead finishes. A matte tin finish is composed of 100% tin solder with large grains. Since the solder volume on the leads is small compared to the solder paste volume that is placed on the land pattern of the PCB, the reflow profile will be determined by the requirements of the solder paste. Therefore, these devices are compatible with both lead-free and SnPb assembly techniques. In addition, unlike other lead-free compositions, matte tin does not have any added alloys that can cause degradation of the solder joint. Pin Identification and Configuration (Top Side View) Top View 15 14 13 16 1 12 2 11 3 10 4 9 5 6 7 8 EClamp2357NQ-3-R0 Pin Identification 3, 4, 5, 7, 9, 10 Input EMI/ESD Protected Lines 1, 2, 11, 12, 14, 16 Output EMI/ESD Protected Lines 6, 8, 13, 15 Input/Output ESD Protected Lines Center Tab Ground Pin Configuration and Schematic 3 2 7 14 LOW PASS FILTER GND LOW PASS FILTER GND 4 1 GND 9 12 LOW PASS FILTER GND LOW PASS FILTER GND 5 16 GND 11 LOW PASS FILTER GND 6 15 GND GND 10 LOW PASS FILTER GND GND GND GND 8 13 GND EClamp2357NQ-4-R0 EClamp2357NQ Final Datasheet Sep 20, 2017 Rev 2.0 www.semtech.com Page 5 Semtech Application Information EClamp2357NQ SD Memory DAT2 DAT2 DAT3 DAT3 SD Controller CMD 3 4 VCC CLK 2 1 5 16 6 15 GND 7 SD_DET 14 8 DAT0 13 9 10 11 12 DAT1 CMD VCC CLK SD_DET DAT0 SD Memory Connector Baseband Controller DAT1 EClamp2357NQ-5-R0 Key Top Side Trace Bottom Side Trace Via 3 2 1 16 6 15 GND 7 14 8 13 9 10 11 12 Key: Top Side Trace Bottom Side Trace Via LCD Module Connector 4 5 4-Wire Touchscreen Connector Baseband Controller EClamp2357NQ LCD and Touch Pad EClamp2357NQ-6-R0 EClamp2357NQ Final Datasheet Sep 20, 2017 Rev 2.0 www.semtech.com Page 6 Semtech Outline Drawing - SLP3030P16 A D B PIN 1 INDICATOR (LASER MARK) DIM A A1 A2 b D D1 E E1 e L N aaa bbb E A2 A aaa C A1 C D1 SEATING PLANE DIMENSIONS MILLIMETERS MIN NOM MAX 0.55 0.60 0.65 0.00 0.02 0.05 (0.15) 0.20 0.25 0.30 2.90 3.00 3.10 1.40 1.50 1.60 2.90 3.00 3.10 1.40 1.50 1.60 0.50 BSC 0.35 0.40 0.45 16 0.08 0.10 e e/2 R0.20 LxN E/2 0.450 2 1 N bxN D/2 bbb C A B NOTES: 1. CONTROLLING DIMENSIONS ARE IN MILLIMETERS (ANGLES IN DEGREES). 2. COPLANARITY APPLIES TO THE EXPOSED PAD AS WELL AS THE TERMINALS. Land Pattern - SLP3030P16 H (C) DIMENSIONS DIM MILLIMETERS G K Z Y P/2 P C G H K P X Y Z (2.80) 2.10 1.60 1.60 0.50 0.30 0.70 3.50 X NOTES: 1. THIS LAND PATTERN IS FOR REFERENCE PURPOSES ONLY. CONSULT YOUR MANUFACTURING GROUP TO ENSURE YOUR COMPANY'S MANUFACTURING GUIDELINES ARE MET. 2. DO NOT PLACE VIAS BETWEEN THE CORNER LEADS INSIDE THE 3X3MM PACKAGE FOOTPRINT. 3. THERMAL VIAS IN THE LAND PATTERN OF THE EXPOSED PAD SHALL BE CONNECTED TO A SYSTEM GROUND PLANE. FAILURE TO DO SO MAY COMPROMISE THE THERMAL AND/OR FUNCTIONAL PERFORMANCE OF THE DEVICE. EClamp2357NQ Final Datasheet Sep 20, 2017 Rev 2.0 www.semtech.com Page 7 Semtech Marking Code 16 1 2 3 4 15 14 13 2357N YYWW 5 6 7 13 14 15 16 12 12 11 11 2 10 10 3 9 9 4 1 8 Top View Showing Device Marking 8 7 6 5 Bottom View Showing Pin1 Identifier EClamp2357NQ-8-R0 Notes: 1. YYWW = Alphanumeric character Date Code 2. Pin 1 indicated by “Mouse Bite“ on the ground pad Tape and Reel Specification - Plastic Tape 2357N YYWW Pin 1 Location (Toward Sprocket Holes) 2357N YYWW User Direction of Feed Ordering Information Part Number Qty per Reel EClamp2357NQTLT 3000 Reel Size 13 Inch EMIClamp and EClamp are trademarks of Semtech Corporation. EClamp2357NQ Final Datasheet Sep 20, 2017 Rev 2.0 www.semtech.com Page 8 Semtech IMPORTANT NOTICE Information relating to this product and the application or design described herein is believed to be reliable, however such information is provided as a guide only and Semtech assumes no liability for any errors in this document, or for the application or design described herein. Semtech reserves the right to make changes to the product or this document at any time without notice. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. Semtech warrants performance of its products to the specifications applicable at the time of sale, and all sales are made in accordance with Semtech’s standard terms and conditions of sale. SEMTECH PRODUCTS ARE NOT DESIGNED, INTENDED, AUTHORIZED OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT APPLICATIONS, DEVICES OR SYSTEMS, OR IN NUCLEAR APPLICATIONS IN WHICH THE FAILURE COULD BE REASONABLY EXPECTED TO RESULT IN PERSONAL INJURY, LOSS OF LIFE OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. INCLUSION OF SEMTECH PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE UNDERTAKEN SOLELY AT THE CUSTOMER’S OWN RISK. Should a customer purchase or use Semtech products for any such unauthorized application, the customer shall indemnify and hold Semtech and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs damages and attorney fees which could arise. The Semtech name and logo are registered trademarks of the Semtech Corporation. All other trademarks and trade names mentioned may be marks and names of Semtech or their respective companies. Semtech reserves the right to make changes to, or discontinue any products described in this document without further notice. Semtech makes no warranty, representation or guarantee, express or implied, regarding the suitability of its products for any particular purpose. All rights reserved. © Semtech 2015 Contact Information Semtech Corporation 200 Flynn Road, Camarillo, CA 93012 Phone: (805) 498-2111, Fax: (805) 498-3804 www.semtech.com EClamp2357NQ Final Datasheet Sep 20, 2017 Rev 2.0 Page 9 Semtech