GN1035CWA-CHIP

      Text Size   Send Print Feed Semtech GN1035 GN1035 2.5Gb/s Transimpedance Amplifier with Automatic Gain Control Add to Watch List Gennum's GN1035 is a fully integrated, silicon germanium transimpedance amplifier; providing wideband, low noise pre-amplification of signal current from a photodetector. It features differential outputs, and incorporates an automatic gain control mechanism to increase dynamic range, allowing input signals up to 2.6 mA peak. A decoupling capacitor on the supply is the only external circuitry required. Features Single +3.3V power supply Power dissipation 125mW (typ) Input noise current = 250nA rms when used with a 0.5pF detector Transimpedance gain 10k? into 100? load (differential) Bandwidth (-3dB) = 2.0GHz No photodiode bypass capacitor required in PIN-based applications. RSSI (received signal strength indicator) current output operates from sensitivity to overload, selectable source or sink Bondpad configuration, and output polarity control, allow for maximum flexibility in pin-out in a TO Can ROSA On-chip filter to improve sensitivity and control bandwidth Applications GPON ONU/ONT Gigabit Ethernet 2x Fibre Channel PCI Express SONET/SDH Infiniband Order Codes Type Package GN1035CWA-CHIP Bare Die   About Semtech Company Overview Media Center Product Announcements http://www.semtech.com/apps/product.php?pn=GN1035[2/2/2015 8:51:22 AM] Sites / Access mySemtech Connect With Us Contact Us