GS1535BCFUE3

GS1535
 Multi-Rate SDI Automatic Reclocker ™ PRODUCT BRIEF CIRCUIT DESCRIPTION • SMPTE 292M and 259M compliant The GS1535 Multi-Rate Serial Digital Reclocker is designed to automatically recover the embedded clock signal and retime the data from a SMPTE 292M or SMPTE 259M compliant digital video signal. • Supports data rates of 143, 177, 270, 360, 540, 1483.5, 1485 Mb/s • Supports DVB-ASI at 270Mb/s • Auto and Manual Modes for rate selection • Standards indication in Auto Mode • 4:1 input multiplexor • Loss of Signal (LOS) output • Lock Detect Output • On-chip Input and Output Termination • Differential inputs and outputs • Selectable automatic Mute or Bypass when not locked • Manual Bypass function • SD/HD indication output to control GS1528 Dual SlewRate Cable Driver • Single 3.3V power supply • Operating temperature range : 0°C to 70°C The device removes the high frequency jitter components from the bit-serial stream. Input termination is on-chip for seamless matching to 50Ω transmission lines. An LV PECL compliant output interfaces seamlessly to the GS1528 Cable Driver The GS1535 can operate in either auto or manual rate selection mode. In Auto mode the GS1535 automatically detects and locks onto an incoming SMPTE SDI data signal from 143Mb/s to 1.485Gb/s. For single rate data systems, the GS1535 can be configured to operate in manual mode. In both modes, the GS1535 requires only one external crystal to set the VCO frequency when not locked and provides adjustment free operation. In systems which require passing non-SMPTE data rates, the GS1535 will automatically or manually enter a bypass mode in order to pass the signal without reclocking. APPLICATIONS The ASI/177 input pin allows for manual selection of support SMPTE 292M and SMPTE 259M Serial Digital Interfaces of either 177Mb/s or DVB-ASI inputs ORDERING INFORMATION PART NUMBER PACKAGE TEMPERATURE GS1535-CFU 64 pin LQFP 0°C to 70°C GS1535-CCU 64 pin BCC++ 0°C to 70°C Revision Date: August 2001 Document No. 19591 - 0 GENNUM CORPORATION P.O. Box 489, Stn. A, Burlington, Ontario, Canada L7R 3Y3 Tel. +1 (905) 632-2996 Fax. +1 (905) 632-5946 E-mail: info@gennum.com www.gennum.com GS1535 FEATURES SDO_MUTE SDO/SDO SCO_EN SCO/SCO SD/HD ASI/177 AUTOBYPASS BYPASS M U X QCLK MUTE M U X DDI0 DDI1 DDI2 DDI3 DDI_SEL[1:0] DIVIDERS PFD XTAL BUFFER XTAL OUT M U X CLF KBB CP PD/PFD PHASE LOCK DETECTOR ONE BIT DETECTOR TRANSITION DETECTOR RE-TIMER VCO EXTERNAL VCO CLK MUX DIVIDERS BYPASS LOGIC CLOCK BUFFER COUNTER AND DECODER OUTPUT BUFFER SS[3:0] AUTO/MAN LD PHASE LOCK TIMER HARMONIC LOCK TIMER LOS TIMER FREQ. LOCK TIMER SYSTEM OSCILLATOR DIAGNOSTICS DFT/DFE XVCO_SEL GS1535 CONTROLLER LOGIC LOS FUNCTIONAL BLOCK DIAGRAM DOCUMENT IDENTIFICATION REVISION NOTES: New Document PRODUCT BRIEF GENNUM CORPORATION GENNUM JAPAN CORPORATION C-101, Miyamae Village, 2-10-42 Miyamae, Suginami-ku Tokyo 168-0081, Japan Tel. +81 (03) 3334-7700 Fax. +81 (03) 3247-8839 MAILING ADDRESS: P.O. Box 489, Stn. A, Burlington, Ontario, Canada L7R 3Y3 Tel. +1 (905) 632-2996 Fax. +1 (905) 632-5946 GENNUM UK LIMITED 25 Long Garden Walk, Farnham, Surrey, England GU9 7HX Tel. +44 (0)1252 747 000 Fax +44 (0)1252 726 523 SHIPPING ADDRESS: 970 Fraser Drive, Burlington, Ontario, Canada L7L 5P5 Gennum Corporation assumes no responsibility for the use of any circuits described herein and makes no representations that they are free from patent infringement. © Copyright August 2001 Gennum Corporation. All rights reserved. Printed in Canada. 2 19591 - 0