RClamp0503F
RailClamp®
TVS Array for USB OTG Interfaces
PROTECTION PRODUCTS - RailClamp®
Description
Features
Transient protection for high-speed data lines to
RailClamp TVS arrays are low capacitance ESD
protection devices designed to protect high speed data
interfaces.. This series has been specifically designed
to protect sensitive components which are connected
to data and transmission lines from overvoltage
caused by ESD (electrostatic discharge), CDE (Cable
Discharge Events), and EFT (electrical fast transients).
The unique design incorporates surge rated, low
capacitance steering diodes and a TVS diode in a
single package. During transient conditions, the
steering diodes direct the transient to either the
positive side of the power supply line or to ground. The
internal TVS diode prevents over-voltage on the power
line, protecting any downstream components.
The low capacitance array configuration allows the user
to protect three high-speed data or transmission lines.
The low inductance construction minimizes voltage
overshoot during high current surges. This device is
optimized for ESD protection of USB OTG and SIM
interfaces. They may be used to meet the ESD immunity requirements of IEC 61000-4-2, Level 4 (±15kV
air, ±8kV contact discharge).
®
IEC 61000-4-2 (ESD) ±25kV (air), ±20kV (contact)
IEC 61000-4-4 (EFT) 40A (5/50ns)
Array of surge rated diodes with internal TVS Diode
Small package saves board space
Protects three I/O lines & power line
Low capacitance (
很抱歉,暂时无法提供与“RCLAMP0503F.TCT”相匹配的价格&库存,您可以联系我们找货
免费人工找货- 国内价格
- 1+42.54516
- 5+17.49275
- 25+9.66936
- 28+8.62331
- 64+8.15742