RDK-SFP+-COPPER01

Semtech-Gennum Products Optical & Copper Portfolio: TIAs ROSAs Single-LANE CDRs Dual-Lane CDRs Multi-LANE Signal Conditioners Laser Drivers Limiting Amplifiers Transceivers Crosspoint Switches Optical Reference Design Kits Copper Reference Design Kits o p t i c a l & IC p r o d u c ts for high-speed communications SP R I N G - 2 0 1 2 Pro d u c t G ui d e High Performance contents Overview 1 Gennum Product Solutions 3 Emerging Technology 4 Optical Applications 5 Copper Applications 6 TIAs 7 ROSAs 9 Single-Lane CDRs 10 Dual-Lane CDRs 11 Multi-Lane Signal Conditioners 12 Laser Drivers and Limiting Amplifiers 13 Transceiver IC’s 14 Optical Module Reference Design Kits 15 CDR-based Copper Cable Assembly Reference Design Kits 16 Crosspoint Switches 17 Portfolio Summary 18 1 Optical and Copper Products Semtech-Gennum Products design the industry’s most innovative optical, analog and mixed signal semiconductor solutions to serve the rising global demand for high-speed data transmission products—robust solutions that improve performance and reliability, simplify design, lower system costs and speed time to market. With the acquisition of Gennum and Nanotech, Semtech now offers one of the industry’s most comprehensive portfolios of optical transceiver IC products ranging from 100Mb/s-100Gb/s supporting such key industry standards such as Fibre Channel, InfiniBand®, Ethernet, PON, SONET and PCI Express®. For optical component suppliers, this highly differentiated set of products gives a unique roadmap that improves performance and reliability, simplifies design, lowers costs and speeds time to market. For systems designers and manufacturers working on the next generation of high-speed networks, Gennum Products’ multi-lane and multi-rate 10Gb/s-100Gb/s backplane solutions provide cost-effective low power, high performance ways to enable next-generation networks. Semtech-Gennum Products is also an active contributor in networking standards development. Combine that with the fact that we’ve shipped over 63 million Optical IC’s, and you get a feel for the sort of real-world experience in networking complexities and solution delivery we can bring to your designs. Spring 2012 Guide • Optical and IC Gennum Products for High-Speed Communications Enabling High Performance, High-Speed: • Receive Optical Sub-Assembly (ROSA) based on Gennum Products’ Rchip technology • Full portfolio of integrated solutions to address all SFP+ and XFP link types • Dual lane signal conditioners with integrated DML or EML driver • Low power, reference-free CDRs • Limiting amplifiers (LA) which provide wideband, low noise post-amplification • Transimpedence amplifiers (TIAs) that exceed the IEEE 10GbE Stressed Receiver Sensitivity (SRS) specifications • High performance, low power laser drivers • Full portfolio of integrated solutions for all PON applications including complete reference designs • Industry’s first single-chip 10G PON transceivers for symmetric and asymmetric applications • Industry’s first quad 10 Gb/s CDR, enabling long reach Infiniband® QDR, 40 GbE and 100 GbE applications • Protocol-independent repeaters/redrivers • SFP+ reference design kits for optical module and copper cable assemblies to decrease design time Let’s Build the Future Together As networking requirements continue to evolve, so will we, working with you to provide solutions for tomorrow’s networking challenges. One thing that won’t change, however, is Gennum Products’ commitment to being a reliable partner, providing innovative approaches that deliver unrivaled performance to your latest products. www.semtech.com 2 Semtech-Gennum Products Solutions Technology Leadership for the Future of Optical Communications Technologies Markets CDRs PON/FTTH Solutions Market leader in CDRs Highly integrated chipset solutions for EPON & GPON ONU/OLT Integrated solutions Industry’s first fully integrated 10G PON ONU solutions, now in pre-production ROSAs Complete reference designs for EPON, GPON, 10G EPON and XG-PON available Best-in-class sensitivity, based on our patented Rchip technology TIAs 16G Fibre Channel Proven reliability, with over 44 million sold Industry’s first complete integrated IC solution for 16G Fibre Channel SFP+ Laser Drivers & Limiting Amps Only integrated solution among industry leaders crosspoints Extensive portfolio including world’s biggest and fastest crosspoints 3 40G – 100G Ethernet R&D efforts clearly focused on the future with products in development Up to 10G Continuing to invest and develop products Spring 2012 Guide • Optical and IC Gennum Products for High-Speed Communications Semtech-Gennum Products Emerging Technology 25-28Gb/s Reference-Free CDRs High Performance Reference-Free CDRs for Next-Generation 100Gb/s Networks The GN2425 and GN2426 are Gennum Products’ new clock and data recovery (CDR) retimers designed to support the implementation of 100Gb Ethernet optical modules. They are designed to handle 25Gb/s data streams within nextgeneration 100Gb/s pluggable fiber-optic modules, line cards and direct-attach copper/optical cables. Features • Enable OIF CEI-28G-VSR retimed interfaces by compensating for losses in the data transmission and resetting the jitter budget GN2425 Provides excellent output jitter performance for optimal interfacing to laser drivers, or directly driving over a copper cable. GN2426 In the receive chain, the GN2426 removes jitter from the recovered optical signal, providing ample margin for line card receivers to recover the high-speed data stream from the module. • Optimized for best jitter performance • Designed specifically for the next-generation 100GbE CFP2 module form-factor • Allow for the serializer and deserializer to be positioned outside of the CFP2 module enabling a simpler, lower power and lower cost solution Data Rate (Gb/s) Input Stage GN2425 GN2426 24.8 to 28.3 24.8 to 28.3 Equalizer Limiting Amp • Enable higher module density and faster serial bit rates Applications • Fiber-optic modules • Chip-to-module links • Direct-attach copper/optical cables • Line cards www.semtech.com 4 Optical Applications Gennum Products offer a comprehensive selection of optical transceiver ICs and components for all 10GbE and OC-192 module form factors, as well as copper solutions for high-speed serial line card and backplane communications. 10G XFP Module for < 40Km Applications GN2010D/EA CDR TOSA LD ROSA LA CDR TIA 10G XFP Module for < 80Km Applications CDR - GN2010D GN2010EA GN2012A GN2004S GN2003S GN2023 GN2024 LD- ROSA GN1155 GN1157 GN1158 GN1411A GN1412A LA CDR TIA GN2010EA CDR - GN2010D GN2010EA GN2012A GN2004S GN2013A TIA - GN1052 GN1055 GN1058 LA - with slice level adjust ROSA - GN3352 GN1052 GN1055 GN1068 10G SFP+ LRM Module Applications LD - LD LA LD GN1153 6/8/10G SFP+ Module Applications ROSA CDR ROSA - GN3050 GN3150 GN3250 GN3268 TIA - TOSA TOSA GN1153 GN1157 GN1158 GN1411A GN1412A GN1155 TOSA LD LD - ROSA ROSA - GN3050/5 GN3150/5 GN3250/5 GN3268 GN3352 LA - GN1250 TIA - GN1052 GN1068 GN1153 ROSA - GN3052 TIA - GN1058 Lowest power, LA Free SFP+ Architecture TOSA LD LD - ROSA 5 GN1160 GN1161 ROSA - GN3055 GN3155 GN3255 Spring 2012 Guide • Optical and IC Gennum Products for High-Speed Communications Copper Applications Gennum Products offer a comprehensive selection of optical transceiver ICs and components for all 10GbE and OC-192 module form factors, as well as copper solutions for high-speed serial line card and backplane communications. High-Speed Backplanes BACKPLANE OR MID-PLANE LINECARD Quad Repeater/ Retimer ASIC CONNECTOR Quad Repeater/ Retimer LINECARD Quad Repeater/ Retimer 4x10Gb/s ASIC CONNECTOR Quad Repeater/Retimer: GN1406 GN1407 GN2405A GN2406 Quad Repeater/ Retimer 4x10Gb/s Redundancy Switching PASSIVE BACKPLANE LINECARD PHY ASIC GX4002 GX4002 SWITCH CARD 2 SWITCH CARD 1 GX4002 Switch ASIC GX4002 www.semtech.com 6 TIAs Wideband, low noise transimpedance amplifiers (TIAs) for your optical communication applications. Gennum Products offer a portfolio of fully integrated Silicon Germanium (SiGe) BiCMOS and pure CMOS transimpedance amplifiers providing wideband, low noise pre-amplification of a current signal from a PIN photodiode or APD. Gennum Products’ TIAs offer best-in-class performance in limiting, linear or automatic gain control versions for use in high performance optical receivers operating from 155 Mb/s to 14.3 Gb/s. Features NT20R67 Low cost 3.3V to 5.0V CMOS PIN TIA with automatic gain control and more than 43dB dynamic range for optical fiber applications up to 200Mb/s. NT23L50 622Mb/s high sensitivity TIA for FTTH and Telecom Fiber transceiver applications. NT24L50 • Wideband, low noise TIAs 1.25Gb/s high sensitivity TIA with automatic gain control for FTTH and datacom fiber transceiver applications. • Limiting, linear and AGC versions • Decoupling capacitor on the supply is the only external component required NT24L55 Super high sensitivity, high performance CMOS 1.25 Gb/s TIA with 35dB of dynamic operating range designed for FTTH applications such as GePON transceivers and long haul telecom/datacom applications. Applications • ITU/IEEE-based transmission systems • 10 Gigabit Ethernet • SONET/SDH based transmission systems, test equipment and optical modules from OC-3 to OC-192 • 8G and 16G Fibre Channel • Serial data systems up to 14.3 Gb/s • PON/FTTH systems – BPON, EPON, GPON, 10GEPON and XG-PON NT25L51 2.5 Gb/s CMOS TIA for FTTH and telecom fiber transceiver applications with automatic gain control enabling over 27 dB of dynamic operating range. NT25L59 2.5 Gb/s high sensitivity CMOS TIA for GPON with automatic gain control enabling over 30 dB of dynamic operating range. TOSA CDR CDR LD LA TIA ROSA 7 Spring 2012 Guide • Optical and IC Gennum Products for High-Speed Communications GN1056 GN1068 Linear TIA for high performance APD applications such as ultra-long haul telecom and submarine applications. Multi-rate limiting TIA providing high gain and wideband performance for use in Ethernet and emerging 16G Fibre Channel applications. GN1058 GN7050, GN7051, GN7052, GN7053 High gain TIA optimized for applications requiring AGC, such as 10GBASE-LRM and DWDM receivers for low OSNR environments. Limiting TIA’s designed specifically for 1G EPON, 1G GPON, 2.5G XG-PON and 10G EPON OLT applications. GN7068 Limiting TIA designed for APD applications such as ROSAs for 10G PON OLT’s and 10GBASE-ZR transceivers modules. Overview Data Rate (Gb/s) Gain BW (GHz) Supply (V) Noise Applications NT20R67 155 Mb/s AGC TIA 0.155 63kΩ 0.165 3.3/5.0 11 nA OC-3, Fast Ethernet NT23L50 622 Mb/s AGC TIA 0.622 50kΩ 0.32 3.3 60 nA OC-12, BPON NT24L50 1.25 Gb/s AGC TIA 1.25 25kΩ 0.75 3.3 92 nA GbE, EPON NT24L55 1.25 Gb/s High Sensitivity AGC TIA 1.25 46kΩ 0.75 3.3 74 nA EPON NT25L51 2.5 Gb/s AGC TIA 2.5 8kΩ 1.7 3.3 230 nA OC-48, GPON (APD) NT25L59 2.5 Gb/s High Sensitivity AGC TIA 2.5 29kΩ 1.5 3.3 108 nA GPON (PD) GN1056 10G Linear to 11.3 500/1kΩ 12 +3.3 1μA OC-192 GN1058 10G AGC to 11.3 4kΩ 12 +3.3 1μA 10GBASE-LRM & DWDM GN7068 10G Limiting to 11.3 3kΩ 12 +3.3 1μA APD ROSAs for 10G PON ONU & 10GBASE-ZR GN1068 14G Limiting to 14.3 6.75kΩ 12 +3.3 1.2μA 10GBASES-SR/LR/ER & 16G FC GN7050 1.25G Burst mode Limiting 1.25 12kΩ * * * 1G EPON OLT GN7051 2.5G Burst mode Limiting 2.5 1.5kΩ * * * 2.5G XG-PON OLT GN7052 Tri-rate PON TIA 1.25/2.5 /10.3 2kΩ * * * 1.25G EPON/ 2.5G XG-PON / 10G EPON OLT GN7053 1G GPON Burst mode Limiting 1.25 1.25kΩ * * * 1G GPON OLT * Please contact your sales representative for a detailed datasheet. www.semtech.com 8 ROSAs Best-in-class receive optical sub-assemblies (ROSAs) based on Gennum Products’ patented Rchip technology. Gennum Products’ complete line of PIN and APD ROSA products spans 850 nanometer (nm) to 1550 nm including limiting, linear and automatic gain control (AGC) functionality. Our PIN ROSAs operate at +3.3V±10% and from -40°C to +85°C, with highly accurate RSSI functionality and industry best dynamic range. The ROSA products feature Gennum Products’ patented Rchip packaged in a fully compliant SC or LC type optical subassembly and are available with optional flex circuits. GN3050/5 10 km limiting ROSA provides excellent performance achieving -21dBm unstressed sensitivity. Ideal for 10GBASELR and SR-1. GN3250/5 10/40 km XMD compatible limiting ROSA provides excellent -21dBm unstressed sensitivity and high ORL for 10GBASE-ER and IR-2 applications. New Super High Gain Rchip ROSAs deliver 35kΩ of gain that eliminates the cost and power of the limiting amplifier for SFP+ applications. GN3052 AGC ROSA for 10 GbE LRM and linear applications. Interoperability with all leading EDC solutions for LRM. Features: GN3352 • Best-in-class stressed receiver sensitivity 10G APD ROSA with AGC TIA is ideal for both 80km limiting and DWDM applications requiring excellent OSNR performance. • High gain to ensure exceptional crosstalk performance within the module • Patented Rchip technology to ensure maximum module manufacturing yield GN3268 10/40 km XMD compatible low power (94 mW) limiting ROSA • Super High Gain deliver most integrated, lowest power SFP+ solution Applications: • • • • 10GBASE-SR 10GBASE-LR 10GBASE-ER 10GBASE-LRM • OC-192 SR-1 • OC-192 IR-2 • 10G EPON TOSA • 80 km • DWDM • 8GFC & 10GFC CDR CDR GN3150/5 LD LA TIA ROSA 850 nm limiting ROSA is ideal for 10GBASE-SR and 8G Fibre Channel applications. Overview Data Rate (Gb/s) Gain Supply RSSI Unstressed Sensitivity Stressed Sensitivity ORL GN3150 SR Rchip Limiting to 11.3 10kΩ +3.3V ± 10% Yes -15dBm OMA -13.5dBm OMA (BASE-SR) -14dB GN3050 10km Rchip Limiting to 11.3 10kΩ +3.3V ± 10% Yes -21dBm -16.8dBm OMA (BASE-L) -14dB GN3250 40km Rchip Limiting to 11.3 10kΩ +3.3V ± 10% Yes -21dBm -16.0dBm OMA (BASE-E) -27dB GN3052 LRM Rchip AGC to 11.3 9kΩ +3.3V ± 10% Yes -17dBm OMA -12dBm OMA (LRM Symmetric, 6” FR4) -14dB GN3352 APD with AGC to 11.3 4kΩ +3.3V ± 10% VAPD -27dBm – -27dB GN3155 SR Super High Gain Rchip to 11.3 35kΩ +3.3V ± 10% Yes -15dBm OMA Eliminate LA in SFP+ -14dB GN3055 10km Super High Gain Rchip to 11.3 35kΩ +3.3V ± 10% Yes -21dBm Eliminate LA in SFP+ -14dB GN3255 40km Super High Gain Rchip to 11.3 35kΩ +3.3V ± 10% Yes -21dBm Eliminate LA in SFP+ -27dB GN3268 40km Low Power Limiting to 11.3 7kΩ +3.3V ± 10% Yes -21dBm 94mW power dissipation -27dB 9 Spring 2012 Guide • Optical and IC Gennum Products for High-Speed Communications Single-Lane CDRs Gennum Products’ clock and data recovery (CDR) products offer the highest performance in the key areas of power consumption, receiver sensitivity, output jitter and jitter tolerance. Low Power XFP and SFP+ Compatible Delivering low power single lane 10Gb/s CDR products enables small form factor module designs. Gennum Products’ CDRs are fully XFP compliant. The low power, reference-free architecture also enables the use of CDRs in SFP+ modules. Pin Compatibility With pin compatible solutions for 10GbE, SONET OC-192 and 8G, 10G and 16G Fibre Channel, overall design effort is reduced. Reference Free TOSA Reference-free CDRs ease the requirements at both the module and system level. CDR LD Leading Jitter Performance With industry leading input jitter tolerance and output jitter, Gennum Products’ CDRs help create an extremely robust design. LA CDR TIA ROSA Data Rate (Gb/s) Input Stage Laser Driver Slice Level Adjust Loopback Support Pin Compatibility Supply (V) Pkg Applications GN1113 8.5 Limiting Amplifier – – Yes GN2003S GN2023 3.3 24 QFN 8GFC GN1114 8.5 Equalizer VCSEL – Yes GN2014A 3.3 24 QFN 8GFC GN2003S 9.95 - 11.3 Limiting Amplifier – – Yes GN1113 GN2023 3.3 24 QFN OC-192, 10GbE, 10GFC GN2004S 9.95 - 11.3 Equalizer – – Yes GN2024 3.3 24 QFN OC-192, 10GbE, 10GFC GN2013A 9.95 - 11.3 Limiting Amplifier – Yes Yes – 3.3 24 QFN OC-192, 10GbE, 10GFC GN2014A 9.95 - 11.3 Equalizer – – Yes GN1114 3.3 24 QFN 10GbE, 10GFC GN2023 9.95 - 11.3 Limiting Amplifier – – Yes GN1113 GN2003S 3.3 24 QFN 10GbE, 10GFC GN2024 9.95 - 11.3 Equalizer – – Yes GN2004S 3.3 24 QFN 10GbE, 10GFC www.semtech.com 10 Dual-Lane CDRs Gennum Products’ dual-lane signal conditioners, with integrated VCSEL, DML or EML driver, offer the lowest power, smallest footprint solution for XFP and retimed SFP+ modules. Enabling SFP+ SONET Multi-rate Support The GN2010D and GN2010EA enable a SONET compliant module in an SFP+ form factor. The integration of the laser driver enables a low power solution for SFP+. The high level of integration also delivers a small footprint solution to fit within the form factor. The 3.3V, reference clock free architecture simplifies the overall module design and saves cost. The GN2010/12 family supports multiple data rates and standards in a single device. The device is able to retime data at 8.5Gb/s for 8G Fibre Channel and is able to retime anywhere from 9.95Gb/s to 11.7Gb/s to support standards such as 10GbE and OC-192 SONET. Feature set for DWDM applications The GN2017A supports 9.95 - 11.3 Gb/s and 14.025 Gb/s data rates enabling retimed, converged SFP+ modules for 16G FC and 10G FCoE applications. The GN2010/12 family has a rich feature set to enable optimal performance in DWDM applications. The features include slice level adjust, programmable peaking on the receive path input and sampling clock phase adjust. TOSA Low Cost, Small Footprint Solution By integrating the limiting amplifier, laser driver and receive and transmit CDR, the GN2010D, GN2010EA and GN2017A provide an optimal path for lower cost designs. The integrated APC loop and small number of external components also save cost. The high level of integration in a small, 5mmx5mm 32-QFN package enables use in very high density designs. 11 CDR CDR LD LA TIA ROSA Data Rate (Gb/s) Lanes Laser Driver Slice Level Adjust Pin Compatibility Supply (V) Pkg Applications GN2010D 8.5 9.95-11.7 2 (1 Rx + 1 Tx) DML Yes GN2010EA 3.3 32 QFN XFP and SFP+ 10GbE, OC-192 and 8GFC GN2010EA 8.5 9.95-11.7 2 (1 Rx + 1 Tx) EML Yes GN2010D 3.3 32 QFN XFP and SFP+ 10GbE, OC-192, 8GFC and DWDM GN2012A 8.5 9.95-11.7 2 (1 Rx + 1 Tx) – Yes – 3.3 32 QFN XFP and SFP+ 10GbE, OC-192, 8GFC and DWDM GN2017A 9.95-11.7 14.025 2 (1 Rx + 1 Tx) VCSEL No GN2010X 3.3 32 QFN 16G FC, 10G FCoE Spring 2012 Guide • Optical and IC Gennum Products for High-Speed Communications Multi-Lane Signal Conditioners Gennum Products’ multi-channel signal conditioners enhance the reach and robustness of high-speed serial links by compensating for transmission losses and re-setting the crosstalk and jitter budgets. High Level of Integration and Small Footprint Reset the Jitter and Crosstalk Budgets Gennum Products’ multi-channel signal conditioners are ideal for small form factor modules or dense backplane applications. Using CDRs will reset the jitter budget, substantially increasing the robustness of the system and allowing for design flexibility. Using CDRs in multi-channel systems will also reset the crosstalk budget, an increasing concern at higher data rates. Full Portfolio Gennum Products offer solutions for SAS, SATA, PCI Express®, Infiniband® and Ethernet. Solutions are available with and without CDR functionality. Drive Long Backplanes or Cables A combination of equalizer and CDR technology allows for an optimal solution to drive long, dense backplanes or cables at high speeds. Lim Amp or EQ CDR DeEmphasis Low Power Gennum Products’ 5 Gb/s and higher CDR products require the lowest power in the industry, a key factor as densities increase. Data Rate (Gb/s) GN1406 2.5 3.125 5.0, 6.25 Lanes 4 CDR Yes Ref Clock Input Stage Required Equalizer (Programmable) Deemphsis Yes Pin Compatibility GN1407 Supply (V) 1.2 1.8 Pkg Applications 56 QFN PCIe Gen 1/2, Infiniband® SDR/DDR, SATA 1/2/ SAS6G, SAS 1/2/SAS6G, SNAP-12, POP-4/LX-4/ CX-4/KX-4, XAUI/RXAUI and Rapid I/O GN1407 1-8 4 – N/A Equalizer (Programmable) – GN1406 1.2 1.8 56 QFN PCIe Gen 1/2/3, Infiniband® SDR/DDR, SATA 1/2/SAS6G, SAS 1/2/SAS6G, SNAP-12, POP-4/LX-4/CX-4/KX-4, XAUI/RXAUI and Rapid I/O GN2405A 2.49 – 2.8 4.98 – 5.6 9.95 – 11.3 4 Yes Not Required Equalizer Yes GN2406 3.3 48 QFN 10GbE 40GbE, 100GbE Infiniband® SDR, DDR, QDR GN2406 2.49 – 2.8 4.98 – 5.6 9.95 – 11.3 4 Yes Not Required Limiting Amp Yes GN2405A 3.3 48 QFN 10GbE 40GbE, 100GbE Infiniband® SDR, DDR, QDR www.semtech.com 12 Laser Drivers and Limiting Amplifiers High performance laser drivers and limiting amplifiers for optical communication. Applications: Limiting Amplifiers: • • • • • • • NT20045 10G EPON, XG-PON1 and XG-PON2 8G Fibre Channel 9.95 Gb/s OC-192 and 10.70 Gb/s OC-192 with FEC 10.3 Gb/s Ethernet 10.52 Gb/s Fibre Channel 11.1 Gb/s Ethernet over SONET 11.3 Gb/s Fibre Channel with Forward Error Correction Low cost 3.0 V to 5.5 V, 200 Mb/s limiting amplifier for SONET, SDH, ESCON and Fast Ethernet applications over optical fiber. NT24L71 1.25 Gb/s CMOS 3.0 V to 5.5 V limiting amplifier with CML data outputs and signal status output in QSOP 16. Laser Drivers: NT20042 NT24L73 Low cost 3.3V / 5.0 V 300 Mb/s LED driver for SONET, ESCON and Fast Ethernet applications over optical fiber. 1.25 Gb/s CMOS limiting amplifier with CML data outputs and signal status in an MSOP package. NT22L33 GN1250L 3.3 V/ 5.0 V CMOS laser driver for data rates of 125 Mb/s to 1.25 Gb/s. A limiting amplifier that provides wideband, low noise postamplification, aimed primarily at OC-192 and SDH STM-64 systems. GN1153B & GN1153C These low power DFB/FP laser drivers are designed specifically to address the 1W power requirements of SFP+, while still satisfying the requirements for XENPAK, X2, and XFP. GN1160 & GN1161 Very low power laser drivers for DFB/VCSEL applications. RSSI feature for compatibility with our high gain ROSA’s, enabling SFP+ modules without limiting amplifiers. Laser Drivers Overview Data Rate (Gb/s) Max Mod / Bias Current Supply Pkg. Applications NT20042 300 Mb/s LED Driver 0.3 100mA 3.3/5.0V QSOP 16 OC-3, Fast Ethernet NT22L33 1.25 Gb/s FP/DFB Laser Driver 1.25 70mA / 80mA 3.3/5.0V 4mm QFN24 OC-3, OC-12, GbE DFB/FP Laser Driver to 11.3 80mA / 120mA 3.3V (opt. 5V output stage) 24 QFN 10GbE, OC-192 GN1160 DFB driver to 11.3 90mA/ 120mA 3.3V (Opt. 2.9V 28 QFN 10GE SFP+ 10GBASE-LR GN1161 VCSEL driver to 11.3 20mA/ 15mA 3.3V (Opt. 2.9V 28 QFN 10GE SFP+ 10GBASE-SR GN1153B/C Limiting Amplifiers 13 Overview Data Rate (Gb/s) Gain BW Supply Noise Figure Applications NT20045 200 Mb/s Limiting Amp 0.2 60dB 0.125 3.3/5.0V 80uV OC-3, Fast Ethernet NT24L71 1.25 Gb/s Limiting Amp 1.25 46dB 0.938 3.3V 300uV OC-3, OC-12, GbE NT24L73 1.25 Gb/s Limiting Amp 1.25 46dB 0.938 3.3V 300uV OC-3, OC-12, GbE GN1250L 10/14G Limiting Amp to 14.5 33.7dB 14.7GHz +3.3V 13dB 10GbE, OC-192, 8G and 16GFC Spring 2012 Guide • Optical and IC Gennum Products for High-Speed Communications Transceiver IC’s (LD & LA) High performance laser drivers and limiting amplifiers for optical communication. NT25L90 GN1411A/12A 2.5 Gb/s CMOS burst mode laser driver and limiting post amplifier with digital set-up, control and on-chip NVM. The GN1411A/GN1412A are highly-integrated, low-power, small footprint transceivers that are ideal for SFP+ LR/ER optical modules. NT28L90 GN1157/58 Gennum Products’ latest, lowest power transceiver IC’s for SFP+ LR/SR applications with integrated APC and advanced eye shaping features. Combined 10 Gb/s limiting post amplifier and 2.5 Gb/s burst mode laser driver for cost critical 10GEPON and XG-PON asymmetric applications. The NT28L90 features Tx & Rx sleep control, TX_SD output and Tx Power burst monitoring. GN7355/GN7354 MAC EQ Burst Mode CDR GN7354 & GN7355 10G EPON transceiver for next generation PON systems. The GN7355 combines a 10G burst mode laser driver with a receive CDR and is targeted at 10G EPON symmetric applications. The GN7354 is a pin-for-pin compatible, derated version of the GN7355 intended to address the 1.25Gb/s and 2.5Gb/s transmit data rate, and cost pressures of the 10Gb/s asymmetric EPON and XG-PON applications. BOSA LD WDM NT25L91 2.5 Gb/s CMOS burst mode laser driver and limiting post amplifier with digital set-up, control, NVM and APD DAC control. LA TIA GN1055 SFP+ SFP+ SRSR GN1155 GN1158 SFP+LRLR SFP+ TOSA LD LA GN1411A GN1157 TOSA LD LA TIA TIA ROSA ROSA Transceiver IC (LD&LA) Overview Data Rate (Gb/s) Max Mod / Bias Current Supply Pkg. Applications NT25L90 2.5 Gb/s Burst Mode LDD & LA 2.5 90mA / 100mA 3.3V 4mm QFN28 EPON, GPON, OC-48 NT25L91 2.5 Gb/s Burst Mode LDD & LA 2.5 90mA / 100mA 3.3V 4mm QFN28 EPON, GPON, BOSA-on-Board NT28L90 10 Gb/s Burst Mode LDD & LA Rx 10.3 Tx 2.5 90mA / 100mA 3.3V 4mm QFN28 10GEPON, XG-PON1 (Asymmetric) GN7354 Burst Mode DFB + Receive LA & CDR Rx: 10.3 Tx: to 2.5 90mA / 90mA 3.3V (3.3 V or 5V output stage) 32 QFN 10GEPON, XG-PON1 (Asymmetric) GN7355 Burst Mode DFB + Receive LA & CDR 10.3 90mA / 90mA 3.3V +5 V output stage (optional 3.3 V) 32 QFN 10GEPON, XG-PON2 (Symmetric) GN1155 VCSEL Driver + Receive LA to 11.3 15mA / 12mA 3.3V 24 QFN 8GFC, 10GbE, and SFP+ GN1411A DFB/FB Laser Driver + Receive LA to 11.3G 80mA / 120mA 3.3V 32 QFN 10GbE LR SFP+, OC-192 GN1412A EML Laser Driver + Receive LA to 11.3G 2.5Vpp / 120mA 3.3V 32 QFN 10GbE ER SFP+, OC-192 GN1157 DML Laser Driver + Receive LA to 11.3G 90mA / 120mA 3.3V 28 QFN 10GbE LR SFP+ GN1158 VCSEL Laser Driver + Receive LA to 11.3G 20mA / 15mA 3.3V 28 QFN 10GbE SR SFP+ www.semtech.com 14 Optical Module Reference Design Kit Improve the performance and time to market of your SFP+ design with Gennum Products Optical Module Reference Design Kits. Fast Time to Market Broad range of reference designs available. Gennum Products’ reference design kits include schematics, layout files and a design guide as well as attentive support from experienced applications engineers. This reduces both design costs and decreases time to market. This is further realized in the FTTx market where it is possible to re-use the 10G symmetric SFP+ design to address the 10G asymmetric market. Reference design kits are offered to cover a wide variety of SFP+ applications, including symmetrical and asymmetrical PON, and 10GbE SR and LR applications. GN1157 RDK (RDK-SFP+-Optical02) For ethernet SFP+, designs are available for both the traditional architecture (including a limiting amplifier in the receive chain), as well as a new LA-free architecture enabled by Gennum Products’ High Gain ROSA portfolio. GN7354/7355 RDK RDK-SFP+-PON-S00 RDK-SFP+-PON-A00 GN1160/GN3055 RDK (RDK-SFP+-Optical04) Rx CDR+ Tx Burst Mode DML driver GN7355 - Symmetric PON GN7354 - Asymmetric PON 15 Parts Demonstrated Data Rate (Gb/s) Connector Type Wavelength (nm) Applications RDK-SFP+-PON-S00 GN7355 10.3 SFP+ 1577/ 1270 10G EPON RDK-SFP+-PON-A00 GN7354 10/1.25 10/2.5 SFP+ 1577/1310 1577/ 1270 10G EPON Asym. XG-PON1 RDK-SFP+-Optical02 GN1157 1/11.3 SFP+ 1310 10GbE LR RDK-SFP+-Optical03 GN1158 1/11.3 SFP+ 850 10GbE SR RDK-SFP+-Optical04 GN1160 & GN3055 1/11.3 SFP+ 1310 10GbE LR RDK-SFP+-Optical05 GN1161 & GN3155 1/11.3 SFP+ 850 10GbE SR Spring 2012 Guide • Optical and IC Gennum Products for High-Speed Communications CDR-based Copper Cable Assembly Reference Design Kits SFP+ copper cable assembly reference design kits (RDK) based on Gennum Products’ industry leading 8 Gb/s and 10 Gb/s CDR technology. Fast Time to Market CDR Advantage Gennum Products’ reference design kits include schematics, layout files and a design guide as well as attentive support from experienced applications engineers. This reduces both design costs and time, to get to market quickly. There are multiple advantages to a CDR-based copper cable assembly. By resetting the jitter budget in the connector, the cable’s performance will be independent of the system it is plugged into. It allows for longer trace lengths and reduces overall crosstalk in the system. Multiple Evaluation Options The RDKs are available in two forms, with or without attached cable. The version with attached cable can be immediately plugged into a system or test set up for quick evaluation. The version without attached cable comes as a set of two populated PCBs with housing, wherein any manufacturer’s cable can be soldered onto the PCBs for a custom evaluation. Copper Cable Assembly RDK CDR+ Limiting Amplifier Equalizer + CDR Data Rate (Gb/s) Connector Type Length (m) Cable Gauge (AWG) Full Action/ Half Action Applications RDK-SFP+-Copper00 8.5 SFP+ 8 30 Full 8GFC RDK-SFP+-Copper01 8.5 SFP+ 15 24 Full 8GFC RDK-SFP+-Copper02 10.3 SFP+ 12 24 Full 10GbE, 10GFC RDK-SFP+-Copper03 10.3 SFP+ 7 30 Full 10GbE, 10GFC RDK-SFP+-Copper04* 8.5 SFP+ N/A N/A Full 8GFC RDK-SFP+-Copper05* 10.3 SFP+ N/A N/A Full 10GbE, 10GFC RDK-QSFP-Copper00 40 QSFP 13 26 Full 10GbE, 40GbE, Infiniband® QDR RDK-QSFP-Copper05 40 QSFP 13 26 Half 10GbE, 40GbE, Infiniband® QDR *A version of the Reference Design Kit is available that contains two populated PCBs without housing, but no cable. It can be used to solder cable to the boards, if a cable type other than the one provided with the reference design kit is desired. www.semtech.com 16 Crosspoint Switches Extensive portfolio of solutions including the world’s biggest and fastest crosspoints Gennum Products’ new crosspoint switches are the most feature-rich available. They are available in sizes from 2 x 2 up to 290 x 290 – the largest asynchronous, fully non-blocking crosspoint switch in the industry. Applications • DWDM systems • SONET/SDH/OTN systems • 10GbE, Fibre Channel and InfiniBand® networks Features • Redundancy switching • Fastest data rates in the industry • Video routers and switchers • Lowest power in industry • Advanced signal integrity features like input equlization, integrated CDRs and output de-emphasis to enable longer trace lengths and reset jitter and crosstalk • Real-time performance monitoring • Support for non-square router configurations 17 Data Rate (Gb/s) Size Ref Clock Imput Stage Deemphesis Supply (V) Pkg. Applications GX3290 3.5 290 x 290 Not Required Equalizer Yes 2.5, 1.8 2377 BGA - DWDM systems - SONET/SDH/OTN systems - Video routers & switchers GX3190 3.5 146 x 290 Not Required Equalizer Yes 2.5, 1.8 2377 BGA - DWDM systems - SONET/SDH/OTN systems - Video routers & switchers GX3246 3.5 290 x 146 Not Required Equalizer Yes 2.5, 1.8 2377 BGA - DWDM systems - SONET/SDH/OTN systems - Video routers & switchers GX3202 3.5 202 x 202 Not Required Equalizer Yes 2.5, 1.8 2377 BGA - DWDM systems - SONET/SDH/OTN systems - Video routers & switchers GX3146 3.5 146 x 146 Not Required Equalizer Yes 2.5, 1.8 2377 BGA - DWDM systems - SONET/SDH/OTN systems - Video routers & switchers GX3074 3.5 74 x 74 Not Required Equalizer Yes 2.5, 1.8 2377 BGA - DWDM systems - SONET/SDH/OTN systems - Video routers & switchers GX4002 up to 14 2x2 Not Required Equalizer Yes 3.3 32 QFN - 16G FC, 10GbE backplane interconnects - Redundancy switching CDR Yes Spring 2012 Guide • Optical and IC Gennum Products for High-Speed Communications Portfolio Summary TIAs Overview Data Rate (Gb/s) Gain BW (GHz) Supply (V) Noise Applications NT20R67 155 Mb/s AGC TIA 0.155 63kΩ 0.165 3.3/5.0 11 nA OC-3, Fast Ethernet NT23L50 622 Mb/s AGC TIA 0.622 50kΩ 0.32 3.3 60 nA OC-12, BPON NT24L50 1.25 Gb/s AGC TIA 1.25 25kΩ 0.75 3.3 92 nA GbE, EPON NT24L55 1.25 Gb/s High Sensitivity AGC TIA 1.25 46kΩ 0.75 3.3 74 nA EPON NT25L51 2.5 Gb/s AGC TIA 2.5 8kΩ 1.7 3.3 230 nA OC-48, GPON (APD) NT25L59 2.5 Gb/s High Sensitivity AGC TIA 2.5 29kΩ 1.5 3.3 108 nA GPON (PD) GN1056 10G Linear to 11.3 500/1kΩ 12 +3.3 1μA OC-192 GN1058 10G AGC to 11.3 4kΩ 12 +3.3 1μA 10GBASE-LRM & DWDM GN7068 10G Limiting to 11.3 3kΩ 12 +3.3 1μA APD ROSAs for 10G PON ONU & 10GBASE-ZR GN1068 14G Limiting to 14.3 6.75kΩ 12 +3.3 1.2μA 10GBASES-SR/LR/ER & 16G FC GN7050 1.25G Burst mode Limiting 1.25 12kΩ * * * 1G EPON OLT GN7051 2.5G Burst mode Limiting 2.5 1.5kΩ * * * 2.5G XG-PON OLT GN7052 Tri-rate PON TIA 1.25/2.5 /10.3 2kΩ * * * 1.25G EPON/ 2.5G XG-PON / 10G EPON OLT GN7053 1G GPON Burst mode Limiting 1.25 1.25kΩ * * * 1G GPON OLT * Please contact your sales representative for a detailed datasheet. ROSAs Overview Data Rate (Gb/s) Gain Supply RSSI Unstressed Sensitivity Stressed Sensitivity ORL GN3150 SR Rchip Limiting to 11.3 10kΩ +3.3V ± 10% Yes -15dBm OMA -13.5dBm OMA (BASE-SR) -14dB GN3050 10km Rchip Limiting to 11.3 10kΩ +3.3V ± 10% Yes -21dBm -16.8dBm OMA (BASE-L) -14dB GN3250 40km Rchip Limiting to 11.3 10kΩ +3.3V ± 10% Yes -21dBm -16.0dBm OMA (BASE-E) -27dB GN3052 LRM Rchip AGC to 11.3 9kΩ +3.3V ± 10% Yes -17dBm OMA -12dBm OMA (LRM Symmetric, 6” FR4) -14dB GN3352 APD with AGC to 11.3 4kΩ +3.3V ± 10% VAPD -27dBm – -27dB GN3155 SR Super High Gain Rchip to 11.3 35kΩ +3.3V ± 10% Yes -15dBm OMA Eliminate LA in SFP+ -14dB GN3055 10km Super High Gain Rchip to 11.3 35kΩ +3.3V ± 10% Yes -21dBm Eliminate LA in SFP+ -14dB to 11.3 35kΩ +3.3V ± 10% Yes -21dBm Eliminate LA in SFP+ -27dB to 11.3 7kΩ +3.3V ± 10% Yes -21dBm 94mW power dissipation -27dB GN3255 GN3268 40km Super High Gain Rchip 40km Low Power Limiting www.semtech.com 18 Single-LANE CDRs Data Rate (Gb/s) Input Stage Laser Driver Slice Level Adjust Loopback Support Pin Compatibility Supply (V) Pkg Applications GN1113 8.5 Limiting Amplifier – – Yes GN2003S GN2023 3.3 24 QFN 8GFC GN1114 8.5 Equalizer VCSEL – Yes GN2014A 3.3 24 QFN 8GFC GN2003S 9.95 - 11.3 Limiting Amplifier – – Yes GN1113 GN2023 3.3 24 QFN OC-192, 10GbE, 10GFC GN2004S 9.95 - 11.3 Equalizer – – Yes GN2024 3.3 24 QFN OC-192, 10GbE, 10GFC GN2013A 9.95 - 11.3 Limiting Amplifier – Yes Yes – 3.3 24 QFN OC-192, 10GbE, 10GFC GN2014A 9.95 - 11.3 Equalizer – – Yes GN1114 3.3 24 QFN 10GbE, 10GFC GN2023 9.95 - 11.3 Limiting Amplifier – – Yes GN1113 GN2003S 3.3 24 QFN 10GbE, 10GFC GN2024 9.95 - 11.3 Equalizer – – Yes GN2004S 3.3 24 QFN 10GbE, 10GFC Dual-Lane CDRs Data Rate (Gb/s) Lanes Laser Driver Slice Level Adjust Pin Compatibility Supply (V) Pkg Applications GN2010D 8.5 9.95-11.7 2 (1 Rx + 1 Tx) DML Yes GN2010EA 3.3 32 QFN XFP and SFP+ 10GbE, OC-192 and 8GFC GN2010EA 8.5 9.95-11.7 2 (1 Rx + 1 Tx) EML Yes GN2010D 3.3 32 QFN XFP and SFP+ 10GbE, OC-192, 8GFC and DWDM GN2012A 8.5 9.95-11.7 2 (1 Rx + 1 Tx) – Yes – 3.3 32 QFN XFP and SFP+ 10GbE, OC-192, 8GFC and DWDM GN2017A 9.95-11.7 14.025 2 (1 Rx + 1 Tx) VCSEL No GN2010X 3.3 32 QFN 16G FC, 10G FCoE Multi-LANE Signal Conditioners Data Rate (Gb/s) GN1406 2.5 3.125 5.0, 6.25 Lanes 4 CDR Yes Ref Clock Input Stage Required Equalizer (Programmable) Pin Compatibility Supply (V) Pkg Applications GN1407 1.2 1.8 56 QFN PCIe Gen 1/2, Infiniband® SDR/ DDR, SATA 1/2/SAS6G, SAS 1/2/SAS6G, SNAP-12, POP-4/ LX-4/CX-4/KX-4, XAUI/RXAUI and Rapid I/O – GN1406 1.2 1.8 56 QFN PCIe Gen 1/2/3, Infiniband® SDR/DDR, SATA 1/2/SAS6G, SAS 1/2/SAS6G, SNAP-12, POP-4/LX-4/CX-4/KX-4, XAUI/ RXAUI and Rapid I/O Deemphsis Yes GN1407 1-8 4 – N/A Equalizer (Programmable) GN2405A 2.49 – 2.8 4.98 – 5.6 9.95 – 11.3 4 Yes Not Required Equalizer Yes GN2406 3.3 48 QFN 10GbE 40GbE, 100GbE Infiniband® SDR, DDR, QDR GN2406 2.49 – 2.8 4.98 – 5.6 9.95 – 11.3 4 Yes Not Required Limiting Amp Yes GN2405A 3.3 48 QFN 10GbE 40GbE, 100GbE Infiniband® SDR, DDR, QDR 19 Spring 2012 Guide • Optical and IC Gennum Products for High-Speed Communications Laser Drivers Overview Data Rate (Gb/s) Max Mod / Bias Current Supply Pkg. Applications NT20042 300 Mb/s LED Driver 0.3 100mA 3.3/5.0V QSOP 16 OC-3, Fast Ethernet NT22L33 1.25 Gb/s FP/DFB Laser Driver 1.25 70mA / 80mA 3.3/5.0V 4mm QFN24 OC-3, OC-12, GbE DFB/FP Laser Driver to 11.3 80mA / 120mA 3.3V (opt. 5V output stage) 24 QFN 10GbE, OC-192 GN1160 DFB driver to 11.3 90mA/ 120mA 3.3V (Opt. 2.9V 28 QFN 10GE SFP+ 10GBASE-LR GN1161 VCSEL driver to 11.3 20mA/ 15mA 3.3V (Opt. 2.9V 28 QFN 10GE SFP+ 10GBASE-SR GN1153B/C Limiting Amplifiers Overview Data Rate (Gb/s) Gain BW Supply Noise Figure Applications NT20045 200 Mb/s Limiting Amp 0.2 60dB 0.125 3.3/5.0V 80uV OC-3, Fast Ethernet NT24L71 1.25 Gb/s Limiting Amp 1.25 46dB 0.938 3.3V 300uV OC-3, OC-12, GbE NT24L73 1.25 Gb/s Limiting Amp 1.25 46dB 0.938 3.3V 300uV OC-3, OC-12, GbE GN1250L 10/14G Limiting Amp to 14.5 33.7dB 14.7GHz +3.3V 13dB 10GbE, OC-192, 8G and 16GFC Transceiver IC (LD&LA) Overview Data Rate (Gb/s) Max Mod / Bias Current Supply Pkg. Applications NT25L90 2.5 Gb/s Burst Mode LDD & LA 2.5 90mA / 100mA 3.3V 4mm QFN28 EPON, GPON, OC-48 NT25L91 2.5 Gb/s Burst Mode LDD & LA 2.5 90mA / 100mA 3.3V 4mm QFN28 EPON, GPON, BOSA-on-Board NT28L90 10 Gb/s Burst Mode LDD & LA Rx 10.3 Tx 2.5 90mA / 100mA 3.3V 4mm QFN28 10GEPON, XG-PON1 (Asymmetric) GN7354 Burst Mode DFB + Receive LA & CDR Rx: 10.3 Tx: to 2.5 90mA / 90mA 3.3V (3.3 V or 5V output stage) 32 QFN 10GEPON, XG-PON (Asymmetric) GN7355 Burst Mode DFB + Receive LA & CDR 10.3 90mA / 90mA 3.3V +5 V output stage (optional 3.3 V) 32 QFN 10GEPON, XG-PON (Symmetric) GN1155 VCSEL Driver + Receive LA to 11.3 15mA / 12mA 3.3V 24 QFN 8GFC, 10GbE, and SFP+ GN1411A DFB/FB Laser Driver + Receive LA to 11.3G 80mA / 120mA 3.3V 32 QFN 10GbE, OC-192 GN1412A EML Laser Driver + Receive LA to 11.3G 2.5Vpp / 120mA 3.3V 32 QFN 10GbE, OC-192 GN1157 DML Laser Driver + Receive LA to 11.3G 90mA / 120mA 3.3V 28 QFN 10GbE LR SFP+ GN1158 VCSEL Laser Driver + Receive LA to 11.3G 20mA / 15mA 3.3V 28 QFN 10GbE SR SFP+ www.semtech.com 20 Optical Reference Design Kits Parts Demonstrated Data Rate (Gb/s) Connector Type Wavelength (nm) Applications RDK-SFP+-PON-S00 GN7355 10.3 SFP+ 1577/ 1270 10G EPON RDK-SFP+-PON-A00 GN7354 10/1.25 10/2.5 SFP+ 1577/1310 1577/ 1270 10G EPON Asym. XG-PON1 RDK-SFP+-Optical02 GN1157 1/11.3 SFP+ 1310 10GbE LR RDK-SFP+-Optical03 GN1158 1/11.3 SFP+ 850 10GbE SR RDK-SFP+-Optical04 GN1160 & GN3055 1/11.3 SFP+ 1310 10GbE LR RDK-SFP+-Optical05 GN1161 & GN3155 1/11.3 SFP+ 850 10GbE SR Copper Reference Design Kits Data Rate (Gb/s) Connector Type Length (m) Cable Gauge (AWG) Full Action/ Half Action Applications RDK-SFP+-Copper00 8.5 SFP+ 8 30 Full 8GFC RDK-SFP+-Copper01 8.5 SFP+ 15 24 Full 8GFC RDK-SFP+-Copper02 10.3 SFP+ 12 24 Full 10GbE, 10GFC RDK-SFP+-Copper03 10.3 SFP+ 7 30 Full 10GbE, 10GFC RDK-SFP+-Copper04* 8.5 SFP+ N/A N/A Full 8GFC RDK-SFP+-Copper05* 10.3 SFP+ N/A N/A Full 10GbE, 10GFC RDK-QSFP-Copper00 40 QSFP 13 26 Full 10GbE, 40GbE, Infiniband® QDR RDK-QSFP-Copper05 40 QSFP 13 26 Half 10GbE, 40GbE, Infiniband® QDR * Please see Copper RDK page for explanation 21 Spring 2012 Guide • Optical and IC Gennum Products for High-Speed Communications Crosspoint Switches Data Rate (Gb/s) Size CDR Ref Clock Imput Stage Deemphesis Supply (V) Pkg. GX3290 3.5 290 x 290 – Not Required Equalizer Yes 2.5, 1.8 2377 BGA - DWDM systems - SONET/SDH/OTN systems - Video routers & switchers GX3190 3.5 146 x 290 – Not Required Equalizer Yes 2.5, 1.8 2377 BGA - DWDM systems - SONET/SDH/OTN systems - Video routers & switchers GX3246 3.5 290 x 146 – Not Required Equalizer Yes 2.5, 1.8 2377 BGA - DWDM systems - SONET/SDH/OTN systems - Video routers & switchers GX3202 3.5 202 x 202 – Not Required Equalizer Yes 2.5, 1.8 2377 BGA - DWDM systems - SONET/SDH/OTN systems - Video routers & switchers GX3146 3.5 146 x 146 – Not Required Equalizer Yes 2.5, 1.8 2377 BGA - DWDM systems - SONET/SDH/OTN systems - Video routers & switchers GX3074 3.5 74 x 74 – Not Required Equalizer Yes 2.5, 1.8 2377 BGA - DWDM systems - SONET/SDH/OTN systems - Video routers & switchers GX4002 up to 14 2x2 Yes Not Required Equalizer Yes 3.3 32 QFN - 16G FC, 10GbE blackplane interconnects - Redundancy switching Applications For more information on Semetch Gennum Products’ Optical & IC for High-Speed Communications Delivering some of the world’s highest performing 10Gb/s optical components, we enable fibre optic capacity to move from the core of the network right to the home. www.gennum.com/applications/optical-networking Corporate Headquarters 200 Flynn Road, Camarillo, California 93012 phone: (805) 498-2111 • fax: (805) 498-3804 • email: corporate@gennum.com www.semtech.com mygennum.com © 2012 Semtech Corporation ® ™ Trademarks of Semtech Corporation except where otherwise noted.