SC1302BISTRT

SC1302A/B/C/D/E/F Dual High Speed Low-Side MOSFET Driver POWER MANAGEMENT Features Description „ The SC1302A/B/C/D/E/F family are low cost dual low-side MOSFET drivers. These drivers accept TTL-compatible inputs and are capable of supplying high current outputs (> 2A peak) to external MOSFETs. Fast switching allows operation up to 1 MHz. The SC1302A/B/C is available in six configurations: SC1302A is a dual non-inverting, SC1302B is a dual inverting and SC1302C alone has an inverting plus one non-inverting output. „ „ „ „ „ „ „ „ „ „ „ „ Operating Voltage — +4.5V to +16.5V Fast rise and fall times (20ns typical with 1000pf load) Dual MOSFET driver Peak drive current — 2A propagation delay — 40ns 8-pin SOIC / MSOP lead free packages. This product is fully WEEE and RoHS compliant Enable/disable control TTL-compatible input Under voltage lockout with hysteresis Low shutdown supply current Over temperature protection ESD protection Dual inverting/non-inverting and inverting/non-inverting configurations The SC1302D/E/F is the derivative part from SC1302A/B/C with pin 1 (EN) and pin 8 (SHDN) internally tied to VCC. An under-voltage lockout circuit guarantees that the driver outputs are low when Vcc is less than 4.5V (typical). An internal temperature sensor shuts down the driver in the event of over temperature. Applications „ Switch-mode power supplies „ Battery powered applications „ Solenoid and motor drives Typical Application Circuit July 13, 2009 © 2009 Semtech Corporation 1 SC1302A/B/C/D/E/F Pin Configuration SC1302A/D (Dual Non-Inverting) Ordering Information Device Package Temperature Range (TJ) SOIC-8 -40°C to +125°C MSOP-8 -40°C to +125°C SC1302AISTRT SC1302BISTRT SC1302CISTRT SC1302DSTRT SC1302ESTRT 8-Pin SOIC (A/D) or MSOP (A only) SC1302B/E (Dual Inverting) SC1302FSTRT SC1302AIMSTRT SC1302BIMSTRT SC1302CIMSTRT Notes: (1) Available in tape and reel only. A reel contains 2,500 devices. (2) Lead-free package only. Device is WEEE and RoHS compliant. 8-Pin SOIC (B/E) or MSOP (B only) SC1302C/F (Inverting+Non-Inverting) Top Marking Information SOIC A/B/C 8-Pin SOIC (C/F) or MSOP (C only) Top Marking Information MSOP A/B/C X=A, B, C 302A = SC1302A yyww = Date Code X=A, B, C yyww = Date Code SOIC D/E/F X=D, E, F yyww = Date Code 2 SC1302A/B/C/D/E/F Absolute Maximum Ratings Recommended Operating Conditions Supply Voltage VCC (V) . . . . . . . . . . . . . . . . . . . . . . -0.3 to +20 Operating Temperature Range (°C) . . . . . . -40 < TJ < +125 Input Voltages (V) . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 to VCC Operating Supply Voltage (V) . . . . . . . . . . . . . . . -0.3 to 16.5 Peak Output Currents (A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Enable Voltage SC1302A/B/C (V) . . . . . . . . . . . -0.3 to VCC Shutdown Voltage SC1302A/B/C (V) . . . . . . . . -0.3 to VCC Thermal Information Continuous Power Dissipation (W). . . . . . Internally limited Thermal Resistance, Junction to Ambient MSOP (°C/W). .206 ESD Protection Level (kV) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Thermal Resistance, Junction to Ambient SIOC (°C/W) . . .165 Maximum Junction Temperature (°C) . . . . . . . . . . . . . . +150 Storage Temperature Range (°C) . . . . . . . . . . . -65 to +150 Lead Temperature (Soldering)10s (°C) . . . . . . . . . . . . . +260 Exceeding the above specifications may result in permanent damage to the device or device malfunction. Operation outside of the parameters specified in the Electrical Characteristics section is not recommended. DC Electrical Characteristics Unless otherwise specified, -40ºC < TA = TJ