UCLAMP0501P.TCT

μClamp0501P μClamp® 1-Line ESD Protection PROTECTION PRODUCTS Description Features µClamp® series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD and surge. They feature large cross-sectional area junctions for conducting high transient currents. They offer desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation. µClamp0501P is in a 2-pin SLP1006P2 package, measuring1.0 x 0.6 x 0.5mm. Leads are spaced at a pitch of 0.65mm and are finished with lead-free NiPdAu. Each device will protect one uni-directional line operating at 5 volts. They may be used to meet the ESD immunity requirements of IEC 61000-4-2 (±15kV contact & ±20 air discharge). The combination of small size and high ESD surge capability makes them ideal for use in applications such as cellular phones, industrial equipment, and portable instrumentation. • High ESD withstand Voltage: +/-15kV (Contact) and +/-20kV (Air) per IEC 61000-4-2 • Ultra-small package(1.0 x 0.6 x 0.5mm) • Protects one I/O or power line • Low ESD clamping voltage • Working voltage: +5V • Low leakage current • Solid-state silicon-avalanche technology Mechanical Characteristics • • • • • Applications • • • • • Package Dimension SLP1006P2 package Pb-Free, Halogen Free, RoHS/WEEE Compliant Lead Finish: NiPdAu Marking: Marking code Packaging: Tape and Reel Cellular Handsets & Accessories OLED Displays VBUS Notebooks & Handhelds Portable Instrumentation Schematic & Pin Configuration 1.0 1 2 0.60 0.65 1 0.50 SLP1006P2 (Bottom View) μClamp0501P Final Datasheet Revision Date Rev 1.0 10/30/2018 www.semtech.com 1 of 6 Semtech Proprietary & Confidential Absolute Maximum Rating Rating Symbol Value Units Peak Pulse Power (tp = 8/20µs) PPK 200 W Peak Pulse Current (tp = 8/20µs) IPP 16 A ESD per IEC 61000-4-2 (Air)(1) ESD per IEC 61000-4-2 (Contact)(1) VESD ±20 ±15 kV Operating Temperature TOP -55 to +125 O Storage Temperature TSTG -55 to +150 O C C Electrical Characteristics (T=25OC unless otherwise specified) Parameter Symbol Conditions Reverse Stand-Off Voltage VRWM Pin 2 to 1 Reverse Breakdown Voltage VBR It = 1mA, Pin 2 to 1 Reverse Leakage Current IR VRWM = 5V, Pin 2 to 1 Forward Voltage VF IF = 10mA, Pin 1 to 2 Clamping Voltage VC Junction Capacitance CJ Min. Typ. Max. Units 5 V 6 V 5 0.8 μA V IPP=5A, tp = 8/20μs, Pin 2 to 1 9.8 IPP=16A, tp = 8/20μs, Pin 2 to 1 12.5 VR = 0V, f = 1MHz 160 V pF Notes: 1) ESD gun return path connected to ESD ground plane μClamp0501P Final Datasheet Revision Date Rev 1.0 10/30/2018 www.semtech.com 2 of 6 Semtech Proprietary & Confidential Typical Characteristics Non-Repetitive Peak Pulse Power vs. Pulse Time Power Derating Curve 120 10 100 1 % of Rated Power or IPP Peak Pulse Power - PPP (kW) TA = 25OC 0.1 80 60 40 20 DR040412-200 0.01 0.1 1 10 Pulse Duration - tp (µs) 100 DR040514-25-125-150 0 1000 0 Clamping Voltage vs. Peak Pulse Current Forward Voltage - VF (V) 6 4 2 5 10 15 2 1.5 1 0.5 TA = 25OC Waveform: tp= 8x20µs 0 2.5 0 20 TA = 25OC Waveform: tp= 8x20µs 0 5 Peak Pulse Current - IPP (A) 10 15 20 Forward Current - IF (A) Normalized Junction Capacitance vs. Reverse Voltage ESD Clamping (8kV Contact per IEC 61000-4-2) 1.1 45 1 40 0.9 35 Clamping Voltage (V) 0.8 CJ(VR) / CJ(VR=0) 150 3 8 0.7 0.6 0.5 0.4 0.3 TA = 25OC. Waveform IEC61000-4-2 8kV contact discharge. Measured with and corrected for 50Ω, 20dB Attenuator. 50Ω Scope Input Impedance, ≥2GHz BW. ESD Gun Return connected to ESD Ground Plane. 30 25 20 15 10 5 0.2 TA = 25OC. f = 1 MHz. 0.1 0 125 3.5 10 Clamping Voltage - VC (V) 50 75 100 Ambient Temperature - TA (OC) Forward Voltage vs. Forward Current 12 0 25 0 μClamp0501P Final Datasheet Revision Date 0 1 2 3 4 Reverse Voltage - VR (V) Rev 1.0 10/30/2018 5 6 -5 -10 www.semtech.com 10 30 Time (ns) 50 70 3 of 6 Semtech Proprietary & Confidential Outline Drawing - SLP1006P2 A B D DIMENSIONS MILLIMETERS DIM MIN NOM MAX E TOP VIEW A SEATING PLANE aaa C A A1 b D E e L R N aaa bbb 0.47 0.50 0.53 0.00 0.03 0.05 0.45 0.50 0.55 0.95 1.00 1.05 0.55 0.60 0.65 0.65 BSC 0.20 0.25 0.30 0.05 0.10 0.15 2 0.08 0.10 C A1 PIN 1 ID R bxN bbb C A B 2x L e BOTTOM VIEW NOTES: 1. CONTROLLING DIMENSIONS ARE IN MILLIMETERS (ANGLES IN DEGREES). Land Pattern - SLP1006P2 DIMENSIONS Y (C) Z G X DIM C G X Y Z MILLIMETERS (0.85) 0.30 0.60 0.55 1.40 NOTES: CONTROLLING DIMENSIONS ARE IN MILLIMETERS (ANGLES IN DEGREES). 1. THIS LAND PATTERN IS FOR REFERENCE PURPOSES ONLY. 2. CONSULT YOUR MANUFACTURING GROUP TO ENSURE YOUR COMPANY'S MANUFACTURING GUIDELINES ARE MET. μClamp0501P Final Datasheet Revision Date Rev 1.0 10/30/2018 www.semtech.com 4 of 6 Semtech Proprietary & Confidential Marking Code 5P PIN 1 ID Note: Cathode bar at Pin 2 Tape and Reel Specification 5P 5P 5P 5P 5P Paper Carrier Tape Pin 1 Location (Towards Sprocket Holes) 5P 5P 5P 5P Plastic Carrier Tape Pin 1 Location (Towards Sprocket Holes) Ordering Information Part Number μClamp0501P.TFT μClamp0501P.TCT Qty per Reel 15000 3000 Tape Material Paper Plastic Reel Size 7 Inch 7 Inch MicroClamp, uClamp and μClamp are registered trademarks of Semtech Corporation. μClamp0501P Final Datasheet Revision Date Rev 1.0 10/30/2018 www.semtech.com 5 of 6 Semtech Proprietary & Confidential Important Notice Information relating to this product and the application or design described herein is believed to be reliable, however such information is provided as a guide only and Semtech assumes no liability for any errors in this document, or for the application or design described herein. Semtech reserves the right to make changes to the product or this document at any time without notice. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. Semtech warrants performance of its products to the specifications applicable at the time of sale, and all sales are made in accordance with Semtech’s standard terms and conditions of sale. SEMTECH PRODUCTS ARE NOT DESIGNED, INTENDED, AUTHORIZED OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT APPLICATIONS, DEVICES OR SYSTEMS, OR IN NUCLEAR APPLICATIONS IN WHICH THE FAILURE COULD BE REASONABLY EXPECTED TO RESULT IN PERSONAL INJURY, LOSS OF LIFE OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. INCLUSION OF SEMTECH PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE UNDERTAKEN SOLELY AT THE CUSTOMER’S OWN RISK. Should a customer purchase or use Semtech products for any such unauthorized application, the customer shall indemnify and hold Semtech and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs damages and attorney fees which could arise. The Semtech name and logo are registered trademarks of the Semtech Corporation. All other trademarks and trade names mentioned may be marks and names of Semtech or their respective companies. Semtech reserves the right to make changes to, or discontinue any products described in this document without further notice. Semtech makes no warranty, representation or guarantee, express or implied, regarding the suitability of its products for any particular purpose. All rights reserved. © Semtech 2017 Contact Information Semtech Corporation 200 Flynn Road, Camarillo, CA 93012 Phone: (805) 498-2111, Fax: (805) 498-3804 www.semtech.com μClamp0501P Final Datasheet Revision Date Rev 1.0 10/30/2018 6 of 6 Semtech Proprietary & Confidential