UCLAMP0551Y.TFT

uClamp0551Y Ultra Small μClamp® 1-Line ESD Protection PROTECTION PRODUCTS - Z-PakTM Description Features  High ESD withstand Voltage: +/-20kV (Contact/Air) μClamp TVS diodes are designed to protect sensitive electronics from damage or latch-up due to ESD. They are designed to replace 0201 size multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and other portable electronics. They feature large cross-sectional area junctions for conducting high transient currents. These devices offer desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation. μClamp®0551Y features extremely good ESD protection characteristics highlighted by low typical dynamic resistance of 0.37 Ohms, low peak ESD clamping voltage, and high ESD withstand voltage (+/-20kV contact per IEC 61000-4-2). Low typical capacitance (6.9pF at VR=0V) minimizes loading on sensitive cirucuits. Each device will protect one data or power line operating at 5 Volts. μClamp0551Y is in a 2-pin SLP0603P2X3E package measuring 0.6 x 0.3 mm with a nominal height of 0.25mm. Leads are finished with lead-free NiAu. The small package gives the designer the flexibility to protect single lines in applications where arrays are not practical. The combination of small size and high ESD surge capability makes them ideal for use in portable applications such as cellular phones, digital cameras, and tablet PC’s. ®         per IEC 61000-4-2 Able to withstand over 1000 ESD strikes per IEC 61000-4-2 Level 4 1 pack age Ultra-small 020 0201 package Protects one data or power line Low reverse current: