GHB-SOT23-DR

55 Commerce Way Woburn, MA 01801 (781) 935 - 4442 (781) 938 - 5867 www.gilway.com GHB-SOT23-DR Features ! SOT-23 Description The Super Bright Red source color devices are made with Gallium Aluminum Arsenide Red Light Emitting Diode. PACKAGE SURFACE MOUNT LED LAMP. ! LOW POWER CONSUMPTION. ! LONG LIFE - SOLID STATE RELIABILITY. / REEL. ! PACKAGE: 2000PCS SOT-23 SURFACE MOUNT LED LAMP Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subject to change without notice. REV NO: V.2 DATE:DEC/16/2002 PAGE: 1 OF 4 Selection Guide Par t No.. Pa No. art No Dic e ic L ens Ty p e Lens Typ ens Ty s d Iv (m c d ) Iv (mcd (mcd) @ 20 mA in. Min . in Ty p.. Typ Ty p yp 70 140° V i ew i n g Viewin Vi iewing Angle GHB-SOT23-DR SUPER BRIGHT RED (GaAlAs) WATER CLEAR 36 Note: 1 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical Maximum Ratings at TA=25 C Sy m b o l Sy ymbo ymbol peak D 1/2 C VF IR P a r a m e t er Pa aramete Peak Wavelength Dominate Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current D ev i c e evic e Super Bright Red Super Bright Red Super Bright Red Super Bright Red Super Bright Red Super Bright Red Ty p.. Ty p yp 660 640 20 45 1.85 2.5 10 Max .. ax x Un its nit nm nm nm pF V uA Tes t Co n d it io ns Test Cond ition s est s IF =20mA IF =20mA IF =20mA V F =0V;f=1MHz IF =20mA VR = 5V Absolute Maximum Ratings at TA=25 C P a r a m e t er Paramet Pa arameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating / Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Sup er Briigh t Red Su p er B r g h Red u uper Br Bright Re B 1 00 30 1 55 5 -40 C To +85 C Un its Unit nit mW mA mA V REV NO: V.2 DATE:DEC/16/2002 PAGE: 2 OF 4 REV NO: V.2 DATE:DEC/16/2002 PAGE: 3 OF 4 SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) REV NO: V.2 DATE:DEC/16/2002 PAGE: 4 OF 4