171-001-2TS-PBCLMH

Series 171 MicroStrips Single Row Strips with Solder Cups 171-001 Micro-D Latching MicroStri ps 171-001-7PS-P1CL Single Row Solder Cup MicroStrips These .050" pitch single row solder cup microstrips accept #26 to #30 gage wire with standard contacts and up to size #24 wire with "large bore" contacts. Contacts are factory-installed and potted. Available with 1 to 30 contacts. Optional stainless steel latching mechanism prevents de-mating. Guide pins provide circuit polarization. Contacts are twistpin type and are gold-plated. Housing is molded LCP thermoplastic. Suitable for high-reliability applications where long-term resistance to fretting corrosion is a necessity. 3 A., 600 Vac, -55C to +150C. How To Order Solder Cup Microstrips Series Number of Cavities Contact Gender and Solder Cup Size Pin Contacts, Size #26 Solder Cup Optional Guide Pin For No Guide Pin Optional Latch Optional Mounting Holes For No Mounting Holes Mounting Holes Single Row MicroStrip, .050" Contact Spacing, Solder Cup Contacts 171-001 -1 to - 30 Total number of cavities including guide pins,latches and mounting holes. The number of cavities equals the number of electrical circuits plus 1 cavity for each guide pin and latch, plus 6 cavities for the mounting hole option. PS Omit - P1 For No Latch Omit CL Omit MH Guide Pin in Cav. #1 Center Latch Pin Contacts, Size #24 Solder Cup Guide Pin at Both Ends NS -PB Latch at Both Ends BL Socket Contacts, Size #26 Solder Cup SS The three cavities on each end are filled with epoxy. Two .062" (1.57mm) holes are crossdrilled to allow for attachment to a mounting surface. Replace (X) with guide pin location. P3 shown below: -P(X) Socket Contacts, Size #24 Solder Cup TS Sample Part Number 171-001 -7 PS - P1 CL Q © 2011 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com Q-4 171-001 PIN CONNECTOR .200 (5.08) MAX .075 (1.91) TYP .300 (7.62) 2Xø.062 (1.57) C .110 (2.79) MAX .125 (3.18) .135/.116 (3.43/2.95) .075 (1.91) MAX .062 (1.57) .200 (5.08) REF .075 (1.91) .050 (1.27) MAX SOCKET CONNECTOR 2Xø.062 (1.57) .050 (1.27) MAX .075 (1.91) TYP C .200 (5.08) MAX .125 (3.18) .075 (1.91) .075 (1.91) (A) B (A) B Dimensions # of Cavities 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 (A) In. .050 .100 .150 .200 .250 .300 .350 .400 .450 .500 .550 .600 .650 .700 B Max. mm. In. .085 .135 .185 .235 .285 .335 .385 .435 .485 .535 .585 .635 .685 .735 .785 C In. N/A N/A N/A N/A N/A N/A .200 .250 .300 .350 .400 .450 .500 .550 .600 mm. 2.16 3.43 4.70 5.97 7.24 8.51 9.78 11.05 12.32 13.59 14.86 16.13 17.40 18.67 19.94 mm. N/A N/A N/A N/A N/A N/A 5.08 6.35 7.62 8.89 10.16 11.43 12.7 13.97 15.24 1.27 2.54 3.81 5.08 6.35 7.62 8.89 10.16 11.43 12.70 13.97 15.24 16.51 17.78 # of Cavities 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 (A) In. .750 .800 .850 .900 .950 1.000 1.050 1.100 1.150 1.200 1.250 1.300 1.350 1.400 1.450 B Max. mm. In. .835 .885 .935 .985 1.035 1.085 1.135 1.185 1.235 1.285 1.335 1.385 1.435 1.485 1.535 C In. .650 .700 .750 .800 .850 .900 .950 1.000 1.050 1.100 1.150 1.200 1.250 1.300 1.350 mm. 21.21 22.48 23.75 25.02 26.29 27.56 28.83 30.10 31.37 32.64 33.91 35.18 36.45 37.72 38.99 mm. 16.51 17.78 19.05 20.32 21.59 22.86 24.13 25.4 26.67 27.94 29.21 30.48 31.75 33.02 34.29 19.05 20.32 21.59 22.86 24.13 25.40 26.67 27.94 29.21 30.48 31.75 33.02 34.29 35.56 36.83 Center Latch Locations Even Number of Cavities PIN CONNECTOR SOCKET CONNECTOR Odd Number of Cavities PIN CONNECTOR SOCKET CONNECTOR CAVITY 1 CAVITY 1 CAVITY 1 CAVITY 1 Latch placed on next lower cavity prior to centerline. Latch position = (# of Cavities) ÷ 2. Latch placed in cavity on centerline. Latch Position = (# of Cavities+1) ÷ 2. © 2011 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com Q-5 Micro-D Latching MicroStri ps Series 171 MicroStrips Single Row Solder Cup Strips Q