171-008-7P-PBCLMH

171-008 Single Row Surface Mount MicroStrips These .050" pitch single row surface mount microstrips are available with 1 to 30 contacts. SMT tails are .013" diameter and are solder dipped in 63/37 tin-lead. Optional latching mechanism provides secure connection. Optional guide pins provide circuit polarization. Contacts are twistpin type and are gold-plated. Housing is molded LCP thermoplastic. Suitable for highreliability applications where long-term resistance to fretting corrosion is a necessity. 3 A., 600 Vac, -55C to +150C. 171-008-5P How To Order Surface Mount Strips Series Number of Cavities Contact Type Optional Guide Pin Optional Latch Optional Mounting Holes Single Row MicroStrip, .050" Contact Spacing, Surface Mount Tails 171-008 -1 to - 30 Total number of cavities including guide pins,latches and mounting holes. The number of cavities equals the number of electrical circuits plus 1 cavity for each guide pin and latch, plus 6 cavities for the mounting hole option. Pin Contacts P For No Guide Pin Omit - P1 For No Latch Omit CL For No Mounting Holes Mounting Holes Omit MH Guide Pin in Cav. #1 Center Latch Socket Contacts The three cavities on each end are filled with epoxy. Two .062" (1.57mm) holes are cross-drilled to allow for attachment to a mounting surface. S Guide Pin at Both Ends -PB Latch at Both Ends BL Replace (X) with guide pin location. P3 shown below: - P(X) Sample Part Number 171-008 -5 P © 2011 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com Q-13 Micro-D Latching MicroStri ps Series 171 MicroStrips Single Row Surface Mount Strips Q Series 171 MicroStrips Single Row Surface Mount Strips 171-008 PIN CONNECTOR .075 (1.91) TYP .300 (7.62) 2Xø.062 (1.57) C .110 (2.79) MAX .125 (3.18) .050 (1.27) TYP Micro-D Latching MicroStri ps .050 (1.27) MAX .075 (1.91) .075 (1.91) (A) B SOCKET CONNECTOR 2Xø.062 (1.57) .050 (1.27) MAX .075 (1.91) TYP C .050 (1.27) TYP .125 (3.18) TYPICAL SURFACE MOUNT CONFIGURATION #28 AWG .090 (2.29) .045 (1.14) (A) B .135/.116 (3.43/2.95) .075 (1.91) MAX .062 (1.57) .200 (5.08) REF .075 (1.91) Dimensions # of Cavities 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 (A) In. .050 .100 .150 .200 .250 .300 .350 .400 .450 .500 .550 .600 .650 .700 B Max. mm. In. .085 .135 .185 .235 .285 .335 .385 .435 .485 .535 .585 .635 .685 .735 .785 C In. N/A N/A N/A N/A N/A N/A .200 .250 .300 .350 .400 .450 .500 .550 .600 mm. 2.16 3.43 4.70 5.97 7.24 8.51 9.78 11.05 12.32 13.59 14.86 16.13 17.40 18.67 19.94 mm. N/A N/A N/A N/A N/A N/A 5.08 6.35 7.62 8.89 10.16 11.43 12.7 13.97 15.24 1.27 2.54 3.81 5.08 6.35 7.62 8.89 10.16 11.43 12.70 13.97 15.24 16.51 17.78 # of Cavities 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 (A) In. .750 .800 .850 .900 .950 1.000 1.050 1.100 1.150 1.200 1.250 1.300 1.350 1.400 1.450 B Max. mm. In. .835 .885 .935 .985 1.035 1.085 1.135 1.185 1.235 1.285 1.335 1.385 1.435 1.485 1.535 C In. .650 .700 .750 .800 .850 .900 .950 1.000 1.050 1.100 1.150 1.200 1.250 1.300 1.350 mm. 21.21 22.48 23.75 25.02 26.29 27.56 28.83 30.10 31.37 32.64 33.91 35.18 36.45 37.72 38.99 mm. 16.51 17.78 19.05 20.32 21.59 22.86 24.13 25.4 26.67 27.94 29.21 30.48 31.75 33.02 34.29 19.05 20.32 21.59 22.86 24.13 25.40 26.67 27.94 29.21 30.48 31.75 33.02 34.29 35.56 36.83 Center Latch Locations Even Number of Cavities PIN CONNECTOR SOCKET CONNECTOR Odd Number of Cavities PIN CONNECTOR SOCKET CONNECTOR Q CAVITY 1 CAVITY 1 CAVITY 1 CAVITY 1 Latch placed on next lower cavity prior to centerline. Latch position = (# of Cavities) ÷ 2. Latch placed in cavity on centerline. Latch Position = (# of Cavities+1) ÷ 2. © 2011 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com Q-14