177-706H21S8K218

177-705h and 177-706h MIL-DtL-83513 type Micro-D hermetic Connectors Rear panel Mount with o-Ring Fluorosilicone O-Ring eliminates the cost of soldering or welding the connector to a bulkhead. Kovar® Shells and Contacts comply with applicable MILDTL-83513 requirements and are 100% intermateable with standard connectors. Solder Cup, PC Tail or Pre-Wired and Fully Potted Suitable for #26 gage wire or smaller, solder cup versions feature gold-plated contacts. Choose PC tails for attachment to flex circuits or rigid boards. Solder cup versions are also available pre-wired and potted. hoW to oRDER soLDER Cup AND pC tAIL CoNNECtoRs series 177-705h Micro-D Hermetic Socket Receptacle, Rear Panel Mount with O-Ring, Solder Cup or PC Tail Layout Number of Contacts 9 15 21 25 31 37 51 100 Contact type s – Socket termination type s – Solder Cup p – PC Tail Mounting threads u – #4 - 40 UNC M – M3 Metric Sample Part Number 177-705h 15 s p u hoW to oRDER pRE-WIRED CoNNECtoRs series 177-706h Layout 9 15 21 25 31 37 51 100 Contact type s – Socket Wire Gage (AWG) 6 – #26 8 – #28 0 – #30 Wire type K – M22759/11 600 Vrms Teflon (TFE) (Not Available in #30 AWG) Wire Color 1 – White 2 – Yellow 5 – Color-Coded Stripes Per MIL-STD-681 (#26 gage only) Wire Length Inches 18 Wire Length In Inches. “18” Specifies 18 Inches. J – M22759/33 600 Vrms Modified Cross-Linked Tefzel (ETFE) 7 – Ten Color Repeat Sample Part Number 177-706h 25 s 6 K 1 – 18 © 2009 Glenair, Inc. www.glenair.com CAGE CODE 06324 Printed in U.S.A. E-Mail: sales@glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 I-7 MIL-DTL-83513 Connectors I MIL-DTL-83513 Connectors A B C D E F 9-69 CONTACTS #2-56 THREADS 100 CONTACTS #4-40 THREADS G H J LK 177-705H and 177-706H MIL-DTL-83513 Type Micro-D Hermetic Connectors Rear Panel Mount with O-Ring TWO ROW .180 (4.57) MAX. BLIND TAPPED MTNG HOLES #4-40 THREE, FOUR ROW .260 (6.60) MAX. SOLDER CUP WIRE LENGTH +1.0 (2.54)/-0.0 .094 ± .005 (2.39 ± 0.13) EPOXY .500 (12.7) MAX. PRE-WIRED .125 ± .015 (3.18 ± 0.38) .021/.018 (0.53/0.46) PC TAIL DIMENSIONS A Max. Layout 9S 15S 21S 25S 31S 37S 51S 2 row 51S 3 row 100S B In. mm. 25.67 29.48 33.29 35.83 39.64 43.45 52.35 42.19 58.72 C MAX. D In . mm. 14.35 18.16 21.97 24.51 28.32 32.13 41.02 30.86 45.72 E MAX. F Max. G In. mm. 4.95 4.95 4.95 4.95 4.95 4.95 4.95 4.95 4.95 H Max. J K In. mm. 6.45 6.45 6.45 6.45 6.45 6.45 6.45 6.45 6.45 L Max. In. mm. ± .005 ± 0.13 In . mm. ± .003 ± 0.08 In. mm. In. mm. ± .004 ± 0.10 In. mm. In. mm. ± .004 ± 0.10 In. mm. 1.488 1.638 1.788 1.888 2.038 2.188 2.538 2.138 2.820 37.80 41.61 45.42 47.96 51.76 55.57 64.47 54.30 71.63 1.011 1.161 1.311 1.411 1.561 1.711 2.061 1.661 2.312 .728 .878 1.028 1.128 1.278 1.428 1.778 1.378 2.002 18.49 22.30 32.51 28.65 32.46 36.27 45.16 35.00 50.85 .565 .715 .865 .965 1.115 1.265 1.615 1.215 1.800 .250 .250 .250 .250 .250 .250 .250 .310 .330 6.35 6.35 6.35 6.35 6.35 6.35 6.35 7.87 8.38 .675 .675 .675 .675 .675 .675 .675 .715 .795 17.14 17.14 17.14 17.14 17.14 17.14 17.14 18.16 20.19 .195 .195 .195 .195 .195 .195 .195 .195 .195 .526 .526 .526 .526 .526 .526 .526 .526 .599 13.36 13.36 13.36 13.36 13.36 13.36 13.36 13.36 15.21 1.254 1.414 1.564 1.664 1.814 1.984 2.334 1.920 2.569 31.85 36.91 39.72 42.26 46.07 50.39 59.28 48.77 65.25 .254 .254 .254 .254 .254 .254 .254 .254 .254 .358 .358 .358 .358 .358 .358 .358 .358 .358 9.09 9.09 9.09 9.09 9.09 9.09 9.09 9.09 9.09 I © 2009 Glenair, Inc. www.glenair.com CAGE CODE 06324 Printed in U.S.A. E-Mail: sales@glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 I-8 177-705H and 177-706H MIL-DTL-83513 Type Micro-D Hermetic Connectors Rear Panel Mount with O-Ring PANEL CUTOUT DIMENSIONS FOR 177-705 AND 177-706 A B C FULL RADIUS Ø .134 ± .004 (3.40 ± 0.10) 2 PLCS A Layout 9 15 21 25 31 37 51 2 row 51 3 row 100 In. ± .003 1.011 1.161 1.311 1.411 1.561 1.711 2.061 1.661 2.312 B mm. ± 0.08 25.69 29.50 33.31 35.85 39.66 43.47 52.35 42.19 58.72 C mm. ± 0.13 18.56 22.37 26.18 28.72 32.53 36.34 45.24 35.08 50.93 In. ± .005 .731 .881 1.031 1.131 1.281 1.431 1.781 1.381 2.005 In. + .005/ -0.0 .252 .252 .252 .252 .252 .252 .252 .310 .330 mm. + 0.13/ -0.0 6.40 6.40 6.40 6.40 6.40 6.40 6.40 7.87 8.38 © 2009 Glenair, Inc. www.glenair.com CAGE CODE 06324 Printed in U.S.A. E-Mail: sales@glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 I-9 MIL-DTL-83513 Connectors I