189-015NF1505-3B

for Multichannel M85045 Shipboard Fiber Optic Cable for Use with MIL-PRF-28876 or Glenair 180-040 Connectors Product Series Finish (Table II) Dash Number (Table III) Band 600-052 Supplied (Omit if Not Required) 189-015 Environmental Banding Backshell MIL-PRF28876 189 - 015 Basic Part Number NF 13 05 - 3 B Shell Size (Table I) Length in 1/2 Inch Increments (e.g. 3 = 1.5 Inches) C Spacer Ring (See Note 2) O-Ring (See Note 2) C Dia. A Thread .310 (7.9) Length L B Dia. K Dia. Cable Entry Knurl Style Manufacturer's Option Typ. Accomodates Band Part Number 600-052 1.0 (25.4) 2.0 (50.8) Internal Mechanical Strain Relief Anti-Rotation (Automatic Clamp used instead of traditional saddle bars to protect optical fibers) Shrink Sleeving MIL-I-23053/4 (See Note 3) Shrink Sleeving MIL-I-23053/5 (See Note 3) © 2010 Glenair, Inc. www.glenair.com CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 C-12 E-Mail: sales@glenair.com for Multichannel M85045 Shipboard Fiber Optic Cable for Use with MIL-PRF-28876 or Glenair 180-040 Connectors TABLE I: SHELL SIZE Shell Size 11 13 15 23 Designator (Ref) A B C F A Thread Class 2B 3/4 -20 UNEF 7/8 -20 UNEF 1 -20 UNEF 1-7/16 -18 UNEF B Dia Max 1.028 (26.1) 1.141 (29.0) 1.263 (32.1) 1.703 (43.3) C Dia Max .410 (10.4) .532 (13.5) .710 (18.0) 1.116 (28.3) Max Dash Number 05 05 07 13 TABLE I: CABLE ENTRY AND SHRINK SLEEVE DASH NUMBER Dash No. 05 07 09 11 13 Clamp Size 12 16 20 24 28 Cable Size Maximum .280 (7.1) .395 (10.0) .510 (13.0) .621 (15.8) .736 (18.7) K Diameter +.005 (0.1) .312 (7.9) .438 (11.1) .562 (14.3) .688 (17.5) .812 (20.6) L Max 1.110 (28.2) 1.210 (30.7) 1.210 (30.7) 1.210 (30.7) 1.360 (34.5) Dash No. MIL-I-2305/4 Shrink Sleeve -203-0 -204-0 -204-0 -205-0 -205-0 Dash No. MIL-I-23053/5 Shrink Sleeve -107-0 -108-0 -109-0 -106-0 -110-0 Cable Entry Minimum .203 (5.2) .328 (8.3) .452 (11.5) .515 (13.1) .640 (16.3) Maximum .375 (9.5) .500 (12.7) .625 (15.9) .750 (19.1) .875 (22.2) TABLE II: FINISH SYM M NF MATERIAL Aluminum Aluminum FINISH Electroless Nickel Cadmium O.D. Over Electroless Nickel (500-Hr. Salt Spray) APPLICATION NOTES 1. Material/ Finishes: 3. MIL-I-23053/4 & 5 Shrink Sleeving are packed loose in a plastic bag. MIL-I-2305/4 Shrink Sleeving to be heat shrinked over rear of Adapter Adapter, Coupling Nut – Aluminim Alloy/See Table II before MIL-I-23053/5 Shrink Sleeving. Clamp Components – Ryton R4XT-Black; Ultem 1000-Natural Anti-Rotation Device – Torlon 4203L-Natural 4. Metric Dimensions (mm) are indicated in parentheses. O-Ring – Fluorosilicone/ N.A. 2. Spacer Ring and O-Ring are packed loose and must be installed with connector at time of assembly. The Spacer is utilized to retain the Terminus Insert. © 2010 Glenair, Inc. www.glenair.com CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 C-13 E-Mail: sales@glenair.com MIL-PRF28876 189-015 Environmental Banding Backshell C