189J009M1307-04

Backshells and Accessories 189 S 009 NF 13 08-04 Product Series Angular Function H = 45° J = 90° S = Straight Basic Number Finish Symbol (Table III) Shell Size (Table I) Length (See Note 2) .140/.130 (3.6/3.3) A Thread B Knurl Style Mfr Option J 45 189-009 Banding Backshell / Molding Adapter For MIL-PRF-28876 Connectors Length (1/2” Increments See Note 2) Entry Size (Table II) Pressure Ring (See Note 4) O-Ring (See Note 4) C .310 (7.9) Length N .062 (1.6) P STYLE 2, SYM S (See Note 3) 1.25 (31.8) Max L M SYM S STRAIGHT M Dia Straight Knurl G (See Note 3) STYLE 2 45 & 90 K SYM H 45 SYM J 90 H © 2006 Glenair, Inc. www.glenair.com CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com I-16 189-009 Banding Backshell / Molding Adapter For MIL-PRF-28876 Connectors TABLE I: SHELL SIZE Shell Size 11 13 15 23 Connector Designator A B C F A Thread UNEF .750 - 20 UNEF .875 - 20 UNEF 1.000 - 20 UNEF 1.437 - 18 UNEF B Max .960 (10.4) 1.085 (27.6) 1.255 (31.9) 1.695 (43.1) C Max .410 (10.4) .532 (13.5) .710 (18.0) 1.116 (28.3) G Max 1.280 (32.5) 1.350 (34.3) 1.430 (36.3) 1.640 (41.7) H Max 1.330 (3.8) 1.400 (29.0) 1.470 (37.3) 1.680 (42.7) J Max 1.140 (29.0) 1.170 (29.7) 1.200 (30.5) 1.290 (32.8) K Max 1.190 (30.2) 1.220 (31.0) 1.250 (31.8) 1.330 (33.8) Max Entry 07 08 10 13 TABLE II: BACKSHELL DIMENSIONS Dash No. 04 05 06 07 08 09 10 11 12 13 P Dim .044 (1.1) .044 (1.1) .044 (1.1) .044 (1.1) .044 (1.1) .044 (1.1) .044 (1.1) .044 (1.1) .069 (1.8) .069 (1.8) L Dia .205 (5.2) .235 (6.0) .255 (6.5) .330 (8.4) .450 (11.4) .540 (13.7) .670 917.0) .840 (21.3) .960 (24.4) 1.080 (27.4) M Dia .325 (8.3) .355 (9.0) .375 (9.5) .450 (11.4) .580 (14.7) .660 (16.8) .790 (20.1) .960 (24.4) 1.080 (27.4) 1.200 (30.5) N Dim .525 (13.3) .525 (13.3) .525 (13.3) .525 (13.3) .600 (15.2) .600 (15.2) .600 (15.2) .600 (15.2) .600 (15.2) .600 (15.2) B J N M T SYM NF TABLE III: FINISH MATERIAL Aluminum FINISH Cadmium/Olive Drab over Electroless Nickel (500 Hr. Salt Spray) Cadmium Plate/Olive Drab Gold Iridite over Cadmium Plate over Nickel Cadmium Plate/Olive Drab over Nickel Electroless Nickel Cadmium Plate/Bright Dip over Nickel Aluminum Aluminum Aluminum Aluminum Aluminum APPLICATION NOTES 1. Assembly identified with manufacturer’s and P/N, space permitting. 5. Material/ Finish: Adapters, Elbows, Coupling Nut, Pressure Ring–See 2 Standard minimum length for style 1:1.5 inches, Table III. O-Ring–Silicone/ N.A. for style 2:2.0 inches. Note: Length applies to SYMS, straight, only. 6. O-Ring & Pressure Ring to be packaged loose and 3 When cable diameter exceeds inside diameter of connector shell, must be installed with connector backend at time of style 2 will be supplied. assembly. 4. Glenair 600 series Backshell Assy. tools are recommended 7. Metric dimensions (mm) are indicated in parentheses. for assembly and installation. © 2006 Glenair, Inc. www.glenair.com CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com I-17 Backshells and Accessories