233-104-07AL19

SS = SOCKET TO SOCKET 2 3 DASH NO, TABLE III PANEL THICKNESS Bulkhead Feed-Thrus Connector Series 233 - D38999 Series III Type Shell Style 07 - Jam Nut Mount Connector Type 104 - Env. Bulkhead Feed-Thru SEE MIL-C-38999 FOR 233-104-07 INSERT ARRANGEMENTS Jam Nut Mount Environmental Bulkhead Feed-Thru MIL-DTL-38999 Series III Type Shell Size 09 11 13 15 17 19 21 23 25 Insert Arrangement Per MIL-DTL-38999 Series III MIL-STD-1560 Alternate Key Position A, B, C, D, E (N = Normal) J H .210 .150 MAX MAX .565 REF B 233 - 104 - 07 M 11 - 35 P N - 01 Panel Accomodation 01 - .0625″ (Min) .125″ (Max) 02 - .0625″ (Min) .250″ (Max) 03 - .0625″ (Min) .500″ (Max) CONNECTOR, RECEPTACLE, BULKHEAD FEEDTHRU JAM NUT, FOR MIL-C-38999, SERIES III Connector Material and Finish M - Aluminum / Electroless Nickel NC - Aluminum / Zinc-Cobalt NF - Cad / O.D. Over Electroless Nickel (1000hr Salt Spray) ZN - Aluminum Zinc-Nickel Olive Drab MT - Aluminum / Ni-PTFE 1000 Hour GreyTM AL - Aluminum / Pure Electrodeposited Aluminum 947-114 A THREAD HOW TO ORDER: EXAMPLE: PRODUCT SERIES 947 - 114 NF G MAX. Panel PANEL Accom. F THREAD 21 - 35 B P 01 TABLE II: DASH NUMBERS Dash No. 01 02 03 J Max 1.600 (40.6) 1.730 (43.9) 1.980 (50.3) H Max 0.900 (22.9) 1.020 (25.9) 1.270 (32.3) Contact Termination FINISH SYM, TABLE II P - Pin on Jam Nut Side S - SHELL SIZE,on Jam Nut Side Socket TABLE I INSERT ARRANGEMENT DASH NO ALTERNATE POSITION, MIL-C-38999, OMIT FOR NORMAL P = PIN ON JAM NUT SIDE S = SOCKET ON JAM NUT SIDE PP = PIN TO PIN 2 3 SS = SOCKET TO SOCKET 2 3 DASH NO, TABLE III PANEL THICKNESS BASIC NO E E D Dia D DIA Recommended Panel Cut-Out RECOMMENDED PANEL CUT-OUT TABLE I: CONNECTOR DIMENSIONS E SHELL SIZE 9 11 13 15 17 19 21 23 25 A THREAD 0.1 P-0.3L-TS-2 .6250 .7500 .8750 1.0000 1.1875 1.2500 1.3750 1.5000 1.6250 B DIM .875(22.2) 1.000(25.4) 1.250(31.8) 1.375(34.9) 1.500(38.1) 1.625(41.3) 1.750(44.5) 1.875(47.6) 2.000(50.8) C DIM MAX 1.090(27.7) 1.280(32.5) 1.400(35.6) 1.530(38.9) 1.660(42.2) 1.840(46.7) 1.970(50.5) 2.090(53.1) 2.210(56.1) D DIA .698(17.7) .822(20.9) 1.010(27.6) 1.135(28.8) 1.260(32.0) 1.385(35.2) 1.510(38.4) 1.635(41.5) 1.760(44.7) E DIM .322(8.2) .385(9.8) .479(12.2) .541(13.7) .604(15.3) .635(16.1) .698(17.7) .760(19.3) .822(20.9) F THREAD CLASS 2A J SEE MIL-C-38999 FOR INSERT ARRANGEMENTS Insert Arrangements per MIL-DTL-38999 Series III MIL-STD-1560 .6875-24 UNEF H .8125-20 UNEF C .150 1.000-20 UNEF MAX 1.250-18 UNEF 1.375-18 UNEF 1.500-18 UNEF 1.625-18 UNEF 1.750-18 UNS .565 1.125-18 UNEF REF B APPLICATION NOTES 1. 2. 3. Assembly identified with Glenair name, part number and date code, space permitting. A THREAD For pin/pin and socket/socket, symetrical layouts only. Consult factory F THREAD for available insert arrangements Power to a given contact on one end will result in power to contact directly opposite regardless of identification letter CAGE CODE 06324 4. Material/finish: G MAX. jam Shell, lockring, PANEL nut—Al alloy, see Table II Contacts—Copper alloy/gold plate Insulators—High grade rigid dielectric/N.A. Bayonet Pins—CRES/passivate Seals—Silicone/N.A. Printed in U.S.A. E-Mail: sales@glenair.com © 2008 Glenair, Inc. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-12