240-030-4-15P

Micro-D Filter Connectors Solder Cup Glenair’s Filtered Solder Cup Micro-D's provide EMI solutions in a miniaturized M83513 type connector. These connectors feature ceramic capacitor planar arrays and ferrite inductors. Solder cups accept #26 thru #30 AWG wire, or specify oversize contacts for #24 gage wire. Choose Pi or C Filter Arrays in seven filter classes and six layouts. Glenair filtered Micro-D connectors comply with applicable MIL-DTL-83513 requirements and are 100% intermateable with standard connectors. Choose 9 to 37 Contacts, with standard cadmium or nickel plating on the connector housing or choose optional finishes such as gold or chem film. HOW TO ORDER FILTER MICRO-D CONNECTORS WITH SOLDER CUPS Number of Contacts 9 15 21 25 31 37 Series 240-030 1 2 4 5 6 Shell Finish Aluminum Shell – Cadmium – Nickel – Black Anodize – Gold – Chem Film Contact Type Solder Cup Contacts for #24 AWG or Smaller Wire Filter Type C – C Filter P – Pi Filter Filter Class A B C D E F G See “Filter Classes” on Following Page Hardware B P M M1 S S1 L K F R P – Pin S – Socket Stainless Steel Shell 3 – Passivated Sample Part Number 240-030 –2 – 25 P P B B MICRO-D MOUNTING HARDWARE B P M M1 S S1 L K F R Thru-Hole Jackpost Jackscrew Jackscrew Jackscrew Jackscrew Jackscrew Jackscrew Float Mount Float Mount Order Hardware Separately Removable Includes Nut and Washer Hex Head Removable E-ring Hex Head Removable E-ring Extended Slot Head Removable E-ring Slot Head Removable E-ring Extended Hex Head NonRemovable Slot Head NonRemovable Extended For Front Panel Mounting For Rear Panel Mounting © 2006 Glenair, Inc. CAGE Code 06324/0CA77 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com F-5 E-Mail: sales@glenair.com Micro-D Filter A B C D E F G H J K L M N P Micro-D Filter Micro-D Filter Connectors Solder Cup A B C D E F G H J K MICRO-D FILTER CLASSES AND PERFORMANCE Filter Class → C Filter Pi Filter Filter Type → 1 MHz 10 MHz 100 MHz 500-1000 MHz A 19000-28000 38000-56000 B 16000-22500 32000-45000 C 9000-16500 18000-33000 D 4000-6000 8000-12000 E 1650-2500 3300-5000 F 400-650 800-1300 G 200-300 400-600 Capacitance, Picofarads (pF) C 6 24 41 50 Pi 10 40 62 66 C 5 23 39 49 Pi 8 35 60 62 C 3 16 35 46 Insertion Loss, dB Minimum, 25° C. Pi C Pi C Pi 5 25 57 60 — 8 28 41 1 14 50 58 — 4 21 34 — 8 40 52 C — — 10 23 Pi — 2 15 32 C — — 5 17 Pi — 0.8 13 22 A B C F PI FILTER .800 (20.32) MAX. C FILTER .500 (12.70) MAX. E D .096/.088 (2.43/2.23) DIA. .125 (3.18) MAX, .093 ± .005 (2.36 ± 0.13) H .310 (7.87) MAX. DIMENSIONS A Max. B In . In. .785 .785 .935 .935 1.085 1.085 1.185 1.185 1.335 1.335 1.485 1.485 C Max. mm. ± 0.08 14.35 14.35 18.16 18.16 21.97 21.97 24.51 24.51 28.32 28.32 32.13 32.13 D Max. In. .184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .184 .250 E Max. In. In. .310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .310 .310 F mm. ± 0.10 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 ± .004 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 H Max. In. .400 .400 .550 .550 .700 .700 .800 .800 .950 .950 1.100 1.100 L M N P Layout 9P 9S 15P 15S 21P 21S 25P 25S 31P 31S 37P 37S mm. 19.94 19.94 23.75 23.75 27.56 27.56 30.01 30.01 33.91 33.91 37.72 37.72 ± .003 .565 .565 .715 .715 .865 .865 .965 .965 1.115 1.115 1.265 1.265 In. .333 .400 .483 .551 .633 .701 .733 .801 .883 .951 1.033 1.101 mm. 8.46 10.16 12.27 14.00 16.08 17.81 18.62 20.35 22.43 24.16 26.24 27.96 mm. 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 mm. 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 7.87 mm. 10.16 10.16 13.97 13.97 17.78 17.78 20.32 20.32 24.13 24.13 27.94 27.94 © 2006 Glenair, Inc. CAGE Code 06324/0CA77 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com F-6 E-Mail: sales@glenair.com