247-039SA

(Eurofighter JN Spec) Filtered Wall Mount Receptacle Connector MIL-DTL-38999 Series 1.5 Type Alternative Key Position Per MIL-DTL-38999 A, B, C, D, or E N - Normal 247-039 MIL-DTL-38999 Series 1.5 Special Connectors Filter Connector Product Code 247 - 039 - P Contact P - Pin S - Socket N .632 (16.1) Max .096 (2.4) Max .619 (15.7) .974 (24.7) .963 (24.4) .020 (.5) 26 Pins Pin A 1.000 (25.4) .995 (25.3) 1.235 (31.4) Max 1.235 (31.4) Max .118 (3.0) Max Panel Thickness 4x Holes .128 (3.3) .957 (24.3) .949 (24.1) 1.250 (31.8) Max W - Wall Mount G © 2008 Glenair, Inc. www.glenair.com CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com G-2 (Eurofighter JN Spec) Filtered Wall Mount Receptacle Connector TABLE I: FILTER PERFORMANCE CONT. NO. All CAP nF 112 FILTER TYPE PI ATT. dB 0.5M 13 1M 17 10M 48 100M 55 1G 50 APPLICATION NOTES 1. This drawing describes the requirements for a filtered 26 way Size 20 pin contact, PCB Tail receptacle, complying with Eurofighter J62 .017 (JN1003) shell size 16 connector, polarization position 'N' insert arrangement 26. 2. Electrical Characteristics: I. Current rating - each contact at 25° C: 3A DC II. Working voltage - 100 VDC at sea level III. Dielectric withstand voltage (DWV) - 250 VDV @ 5 sec. IV. Typical capacitance - per table I +/- 20% V. Attenuation - per MIL-STD-220A (in 50 Ohm system no load) per table I 3. Transient Protection: Lines 1-2 3-13 4. Environmental Requirements: I. Temperature range: -55°C to +125°C II. Shock: 40g x 6mS III. Vibration: 10g RMS @ 50 to 2000 Hz IV. Humidity: up to 95% R.H. 5. Materials and finishes in accordance with J62.017, Summarized as follows: I. Shell: aluminum alloy II. Finish: olive drab cad plate over nickel III. Contacts: copper alloy gold plate over nickel IV. Insulator: high grade plastic V. Potting: epoxy W.V. 26V @ 50uA DC 30V @ 50uA DC B.V. 31-38V @ 1mA DC 37-46V @ 1mA DC C.V. 58V @ 30A @ 8/20 us 65V @ 30A @ 8/20 us ENERGY 0.1 J 0.1 J © 2008 Glenair, Inc. www.glenair.com CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com G-3 Special Connectors 247-039 MIL-DTL-38999 Series 1.5 G