257-005H2-24

257-005 Connector Receptacle Assembly Stainless Steel Harsh Environment With Printed Circuit Contacts 257 - 005 H 2 - 14S - 5 P W M Product Series Basic Number H = Hermetic (Omit for Standard, substitute dash) 2 = Receptacle Assembly Shell Size (Table I) Alternate Insert Position, See Page 28 (Omit for Normal) Contact Style; P = Pin S = Socket (Non-Hermetic Only) Insert Arrangement Dash No., See Page 28 M = Molding Adapter (Omit for None) 5015 Type Connectors .170 (4.3) (See Note 3) .065/.060 (1.7/1.5) Dia (See Note 3) B Dia .500 (12.7) Max panel E Polarizing Key RECOMMENDED PANEL CUT-OUT A Thread F D .450 (11.4) 1.820 (46.2) Max C Insert Arrangement with Solder Pot Contacts (Page 28) TABLE I Shell Size 10SL 12 14S 18 20 24 28 A Thread Class 2A 5/8 - 24 UNEF 3/4 - 20 UNEF 7/8 - 20 UNEF 1 1/8 - 18 UNEF 1 1/4 - 18 UNEF 1 1/2 - 18 UNEF 1 3/4 - 18 UNEF B Dia Max 1.030 (26.2) 1.160 (29.5) 1.280 (32.5) 1.660 (42.2) 1.780 (45.2) 2.030 (51.6) 2.280 (57.9) C Dia + .010 (0.3) -.000 (0) .653 (16.6) .760 (19.3) .885 (22.5) 1.135 (28.8) 1.260 (32.0) 1.510 (38.4) 1.760 (44.7) D + .010 (0.3) -.000 (0) .585 (14.9) .710 (18.0) .835 (21.2) 1.085 (27.6) 1.210 (30.7) 1.460 (37.1) 1.710 (43.4) E Flats .870 (22.1) .995 (25.3) 1.120 (28.4) 1.495 (38.0) 1.620 (41.1) 1.870 (47.5) 2.120 (53.8) F Ref 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1.730 (43.9) 1.870 (47.5) 2.165 (55.0) 2.448 (62.2) 1. Metric dimensions (mm) are indicated in parentheses. 2. Electrical safety limits must be established by the user. Peak voltages, switching surges, etc., should be used to determine the safety of the application. 3. Applies to size 16 contacts only. Consult factory for other sizes. © 2003 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com 32