280-026P1S9MEGPA

SERIES 28 HiPer-D® Standard and High-Density Connectors 280-026P straight PC tail pin connectors with low profile mounting flange Low profile HiPer-D® straight PC tail pin connectors feature non-removable size #20 or #22 contacts. Intermateable with standard M24308-type D-Subminiature connectors, the HiPer-D® features a rugged machined shell, waterproof sealing and optional ground springs for improved resistance to electromagnetic interference. Threaded holes on the rear of the connector allow attachment to circuit board. Contacts are potted with epoxy. Aluminum shell. Glass-reinforced thermoset epoxy insulators, fluorosilicone face seal. 1000 VAC, 5 Amps (#22) or 7.5 Amps (#20). B How To Order Sample Part Number 280-026P 5S50 Basic Part Number 280-026P Shell SizeContact Arrangement See Shell Size - Contact Arrangements Table Shell Finish ME = Electroless Nickel JF = Cadmium with Yellow Chromate Z1 = Passivated Stainless Steel MT = Nickel-PTFE Z2 = Gold Ground Spring G = Supplied with EMI Ground Spring N = No Ground Spring Mating Hardware N = No Hardware (supplied with #4-40 tapped holes) P = #4-40 Female Jackposts PC Tail Length A = .125 (3.18) Tail Length B = .250 (6.35) Tail Length Shell Size - Contact Arrangements Shell SizeContact Arr. Contact Size and Qty #20 #22 Standard Density 1S9 9 2S15 15 3S25 25 4S37 37 5S50 50 High Density Mating Hardware N No Hardware #4-40 Female Threads in Mounting Holes Choose this option for rear panel mounting and order jackpost kit 289-016 separately. P #4-40 Female Jackposts Shell JF N P B Materials and Finishes Aluminum alloy Contacts Copper alloy, 50 microin. gold plated Insulator Thermoset epoxy Potting Compound Epoxy Face Seal Hardware Fluorosilicone rubber 300 series stainless steel Current Rating Test Voltage Specifications #22 5 AMPS, #20 7.5 AMPS 1000 VAC RMS Insulation Resistance 5000 megohms minimum Operating Temperature -65° C. to +200° C. 62 Ingress Protection IP 67 5H78 78 Shock 300 g. 6H104 104 Vibration, Random 43.92 g. 1H15 15 2H26 26 3H44 44 4H62 B-30 Rev. 09.04.02 © 2015 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 28 HiPer-D Catalog Dimensions in Inches (millimeters) are subject to change without notice. SERIES 28 HiPer-D® Standard and High-Density Connectors 280-026P straight PC tail pin connectors with low profile mounting flange 280-026P DIMENSIONS STD DENSITY SIZE #20HD CONTACTS .030±.002(0.76±0.05) TAIL LENGTH ±.015 HI DENSITY SIZE #22D CONTACTS (±0.38) .020±.002(0.51±0.05) B .025 (0.64) REF R.134 (3.40) C 4-40 UNC 2B TH'D .150 (3.81) MIN. DEEP TYP 2PL 4-40 UNC 2B TH'D .150 (3.81) MIN. DEEP TYP 2PL OR #4-40 JACKPOST D .049 (1.24) .262±.003 (6.65±.0.08) B E C A Shell Size 1 2 3 4 5 6 .435 (11.05) 10° TYP in A mm in 30.81 39.14 53.04 69.32 .494 .494 .494 .494 B mm ± .015 ± 0.38 ± .015 ± 0.38 1.213 1.541 2.088 2.729 2.635 66.93 2.729 69.32 12.55 12.55 12.55 12.55 .605 15.37 .668 16.97 C Basic in D mm in 18.44 26.77 40.49 56.95 .389 .389 .389 .389 E mm in. mm ± .005 ± 0.13 ± .005 ± 0.13 .984 1.312 1.852 2.500 24.99 33.32 47.04 63.50 .726 1.054 1.594 2.242 2.406 61.11 2.500 63.50 2.139 54.33 2.272 57.71 9.88 9.88 9.88 9.88 .501 12.73 .563 14.30 NOTES 1. Contacts are factory-installed, non-removable and are potted with epoxy. 2. HiPer-D® connectors are available with a wide variety of materials and finishes. See About Series 28 HiPer-D® Shell Plating Options for additional choices . Glenair offers the industry’s widest selection of plating and material choices with no setup charge, no minimum order quantity and no schedule impact. 3. For panel cutout dimensions, refer to Panel Cutouts and Printed Circuit Board Footprints. 4. For printed circuit board mounting dimensions, refer to Panel Cutouts and Printed Circuit Board Footprints. 5. HiPer-D® connectors meet the requirements of MIL-DTL-24308 and are intermateable with standard M24308-type D-Subminiature connectors with corresponding contact arrangements and type. 6. Additional electrical, mechanical and environmental specifications are listed in HiPer-D® Product Specification. © 2015 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 28 HiPer-D Catalog Dimensions in Inches (millimeters) are subject to change without notice. B-31