280-029S2H26MEPA

SERIES 28 HiPer-D® Standard and High-Density Connectors 280-029S right angle PC tail socket connectors with low profile mounting flange Low profile right angle PC tail HiPer-D® socket connectors feature rugged machined aluminum shell and stainless steel cover for improved EMI protection. Contacts are non-removable size, #20 or #22. Intermateable with standard M24308-type D-Subminiature connectors, the HiPer-D® features epoxy potting for environmental sealing. Threaded holes on the rear of the connector allow attachment to circuit board. Glass-reinforced thermoset epoxy insulators. 1000 VAC, 5 Amps (#22) or 7.5 Amps (#20). B How To Order Sample Part Number 280-029S Basic Part Number 280-029S Shell SizeContact Arrangement See Shell Size - Contact Arrangements Table Shell Finish ME = Electroless Nickel MT = Nickel-PTFE JF = Cadmium with Yellow Chromate Z2 = Gold Z1 = Passivated Stainless Steel Mating Hardware N = No Hardware (supplied with #4-40 tapped holes) P = #4-40 Female Jackposts PC Tail Length A = .125 (3.18) Tail Length B = .250 (6.35) Tail Length Shell Size - Contact Arrangements Shell SizeContact Arr. Contact Size and Qty #20 #22 Standard Density 1S9 9 2S15 15 3S25 25 4S37 37 5S50 50 High Density Mating Hardware N No Hardware #4-40 Female Threads in Mounting Holes Choose this option for rear panel mounting and order jackpost kit 289-016 separately. P #4-40 Female Jackposts 3S25 Shell P A Materials and Finishes Aluminum alloy Contacts Copper alloy, 50 microinches gold plated Insulator Thermoset epoxy Potting Compound Epoxy Hardware 300 series stainless steel Current Rating Test Voltage Specifications #22 5 AMPS, #20 7.5 AMPS 1000 VAC RMS Insulation Resistance 5000 megohms minimum Operating Temperature -65° C. to +200° C. 1H15 15 2H26 26 3H44 44 4H62 62 Ingress Protection Shock 5H78 78 Vibration, Random 6H104 104 B-36 Rev. 09.04.02 JF IP 67 300 g. 43.92 g. © 2015 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 28 HiPer-D Catalog Dimensions in Inches (millimeters) are subject to change without notice. SERIES 28 HiPer-D® Standard and High-Density Connectors 280-029S right angle PC tail socket connectors with low profile mounting flange 280-029S DIMENSIONS 4-40 UNC 2B TH'D .150 (3.81) MIN. DEEP TYP 2PL OR JACKPOST 2PL A SEE PCB FOOTPRINTS B B C Ø .020±.002 (0.51±0.05) FOR HIGH DENSITY #22D Ø .030±.002 (0.76±0.05) FOR STD DENSITY #20HD .318 (8.08) 10° TYP PC TAIL LENGTH ± .015 (3.81) .243±.005 (6.17±0.13) 4-40 UNC 2B TH'D .150 (3.81) MIN. DEEP TYP 2PL C Shell Size 1 2 3 4 5 6 in A mm in 30.81 39.14 53.04 69.32 66.93 69.32 .494 .494 .494 .494 .605 .668 B mm ± .015 ± 0.38 ± .015 ± 0.38 1.213 1.541 2.088 2.729 2.635 2.729 12.55 12.55 12.55 12.55 15.37 16.97 C Basic in. mm .984 1.312 1.852 2.500 2.406 2.500 24.99 33.32 47.04 63.50 61.11 63.50 NOTES 1. Contacts are factory-installed, non-removable and are potted with epoxy. 2. HiPer-D® connectors are available with a wide variety of materials and finishes. See About Series 28 HiPer-D® Shell Plating Options for additional choices . Glenair offers the industry’s widest selection of plating and material choices with no setup charge, no minimum order quantity and no schedule impact. 3. For panel cutout dimensions, refer to Panel Cutouts and Printed Circuit Board Footprints. 4. For printed circuit board mounting dimensions, refer to Panel Cutouts and Printed Circuit Board Footprints. 5. HiPer-D® connectors meet the requirements of MIL-DTL-24308 and are intermateable with standard M24308-type D-Subminiature connectors with corresponding contact arrangements and type. 6. Additional electrical, mechanical and environmental specifications are listed in HiPer-D® Product Specification. © 2015 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 28 HiPer-D Catalog Dimensions in Inches (millimeters) are subject to change without notice. B-37