280-087S1S9MEN

SERIES 28 HiPer-D® Standard and High-Density Connectors 280-087 socket connectors with standard M24308 type mounting flange, integral banding platform and crimp termination HiPer-D® socket connectors feature integrated banding platform, crimp, rearreleaseable size #20 or #22 contacts. Intermateable with standard M24308-type D-Subminiature connectors, the HiPer-D® features a rugged machined aluminum shell, waterproof sealing and optional ground springs for improved resistance to electromagnetic interference. Gold-plated size #20 contacts conform to M39029/64369 and accept #20 to #24 AWG wire. Gold-plated size #22 contacts conform to M39029/58-360 and accept #22 to #28 AWG wire. Contacts are packaged with connector. Terminate contacts with crimp tools purchased separately. Glass-reinforced thermoset epoxy insulators, copper alloy retention clips. Fluorosilicone face seal and rear grommet meet IP67 immersion requirement. 1000 VAC, 5 Amps (#22) or 7.5 Amps (#20). B Ordering Information Sample Part Number 280-087S Basic Part Number 280-087S Shell SizeContact Arrangement See Shell Size - Contact Arrangements Table ME = Electroless Nickel Z1 = Passivated Stainless Steel N = No Hardware (Through-Hole) L = Jackscrew, Hex Head, Low Profile S = Screwlock, Male, Hex Head, Low Profile Shell Finish Mating Hardware Shell Size - Contact Arrangements Shell SizeContact Arr. Contact Size and Qty #20 #22 Standard Density 1S9 9 2S15 15 3S25 25 4S37 37 5S50 50 NUT AND LOCKWASHER S Captive Screwlock, Hex Head High Density 1H15 15 2H26 26 3H44 44 4H62 62 5H78 78 6H104 104 #4-40 UNC-2B L Captive Jackscrew, Hex Head RETAINER RETAINER #4-40 UNC-2A #4-40 UNC-2A K Slot-Head Extended Jackscrew T Slot-Head Extended Captive Screwlock 1.1 (28) MAX RETAINER #4-40 UNC-2A B-20 Rev. 09.04.02 P Female Jackpost #4-40 UNC-2A .115/.125 (2.92/3.18) ME P MT = Nickel-PTFE ZM = Nickel over Stainless P = #4-40 Female Jackpost K = Jackscrew, Slot Head, Extended Length T = Screwlock, Male, Slot Head, Extended Length Mating Hardware N Thru-Hole No Hardware 3S25 1.1 (28) MAX Materials and Finishes Aluminum alloy Copper alloy, 50 microin. Contacts gold plated Insulators Thermoset epoxy Retention Clips Copper alloy Grommet and Fluorosilicone rubber Seal EMI Spring Copper alloy, nickel plated Hardware 300 series stainless steel Shell Specifications Current Rating #22 5 AMPS, #20 7.5 AMPS Test Voltage 1000 VAC RMS Insulation 5000 megohms minimum Resistance Operating -65° C. to +200° C. Temperature Ingress Protection IP 67 Shock 300 g. Vibration, 43.92 g. Random RETAINER #4-40 UNC-2A © 2015 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 28 HiPer-D Catalog Dimensions in Inches (millimeters) are subject to change without notice. SERIES 28 HiPer-D® Standard and High-Density Connectors 280-087 socket connectors with standard M24308 type mounting flange, integral banding platform and crimp termination 280-087S DIMENSIONS "P" Hardware Shown Female Jackpost B "A" .320 (8.13) to Accommodate Micro or Nano Bandit "C" 10° Typ 1 2 3 4 5 6 Insert Pattern SD 9 HD 15 SD 15 HD 26 SD 25 HD 44 SD 37 HD 62 SD 50 HD 78 HD 104 "J" "E" "B" Shell Size "H" .243±.005 (6.17±.127) "D" Insert Pattern 1S9 Shown For Reference Only .049 (1.24) .038 (.97) .435 (11.50) “A” ±.015 “B” ±.015 “C” ±.005 “D” ±.005 In. In. In. In. mm. mm. mm. mm. “E” ±005 In. mm. “H” In. mm. “J” In. mm. 1.213 30.81 0.494 12.55 0.984 24.99 0.643 16.33 0.311 7.90 0.760 19.30 0.462 11.73 1.541 39.14 0.494 12.55 1.312 33.32 0.971 24.66 0.311 7.90 1.089 27.66 0.462 11.73 2.088 53.04 0.494 12.55 1.852 47.04 1.511 38..8 0.311 7.90 1.629 41.38 0.462 11.73 2.729 69.32 0.494 12.55 63.50 2.159 54.84 0.311 7.90 2.277 57.84 0.462 11.73 2.635 66.93 0.605 15.37 2.406 61.11 2.064 52.43 0.423 10.74 2.182 55.42 0.474 12.04 2.729 69.32 0.668 16.97 2.189 55.60 0.486 12.34 2.307 58.60 0.626 15.90 2.5 2.5 63.50 Contact P/N M39029/63-368 M39029/57-354 M39029/63-368 M39029/57-354 M39029/63-368 M39029/57-354 M39029/63-368 M39029/57-354 M39029/63-368 M39029/57-354 M39029/57-354 NOTES 1. HiPer-D® connectors are available with a wide variety of materials and finishes. See About Series 28 HiPer-D® Shell Plating Options for additional choices . Glenair offers the industry’s widest selection of plating and material choices with no setup charge, no minimum order quantity and no schedule impact. 2. For panel cutout dimensions, refer to Panel Cutouts and Printed Circuit Board Footprints. 3. Connectors are supplied with crimp contacts per M39029. Contacts are not installed. Refer to HiPer-D® Contacts and Crimp Tools for contact part numbers, specifications, crimp tool information, and insertion/extraction tools. 4. HiPer-D® connectors meet the requirements of MIL-DTL-24308 and are intermateable with standard M24308-type D-Subminiature connectors with corresponding contact arrangements and type. 5. Additional electrical, mechanical and environmental specifications are listed in HiPer-D® Product Specification. © 2015 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • Series 28 HiPer-D Catalog Dimensions in Inches (millimeters) are subject to change without notice. B-21