320BS002G16

Standard Profile - Direct Coupling - Straight Only A-B -C-D-E-F G-H-J-K-L-S * Conn. Desig. B See Note 2 CONNECTOR DESIGNATORS * 320 F S 002 M 16-3 Product Series Connector Designator Angle and Profile S = Straight Basic Part No. Length (1/2 inch increments: e.g. 3 = 1.5 inches) Minimum order length 1.5 inches Shell Size (Table I) Finish (Table II) DIRECT COUPLING Length ± .060 (1.52) A Thread, Class 2B (Table I) B (Table I) TABLE II : STANDARD FINISHES GLENAIR SYMBOL B C G M NF FINISH Cadmium Plate, Olive Drab Anodize, Black Hard Coat, Anodic Electroless Nickel Cadmium Plate, Olive Drab Over Electroless Nickel A Thread Class 2A (Table I) See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. See Back Cover for Complete Finish Information and Additional Finish Options 1. Metric dimensions (mm) are indicated in parentheses. 2. When using Connector Designator B refer to pages 18 and 19 for part number development. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 32 - Page 3 32 320-002 Extender Backshell