340JS002M16

Direct Coupling A-B -C-D-E-F G-H-J-K-L-S * Conn. Desig. B See Note 3 CONNECTOR DESIGNATORS * 340 F S 002 M 16-5 H 6 A Product Series Connector Designator Angle and Profile S = Straight Basic Part No. Finish (Table II) End Fitting Symbol (Table IV) Attachment Length (1/2 inch increments: e.g. 6 = 3 inches) Attachment Symbol (Table III) Length (1/2 inch increments: e.g. 5 = 2.5 inches, 1.0 Inch Minimum Order Length ) Shell Size (Table I) DIRECT COUPLING A Thread (Table I) Length ± .060 (1.52) O-Ring See inside back cover fold-out or pages 13 and 14 for unabrdiged Tables I and II. TABLE IV: END FITTING Symbol E Dia. A .140 (3.6) B .167 (4.2) C .182 (4.6) D .191 (4.9) E .125 (3.2) F .218 (5.5) B (Table I) .50 (12.7) Max Attachment Length ±.25 (6.4) E Dia (Table IV) Symbol C D E F G H N R S U TABLE III: ATTACHMENT OPTIONS Attachment No attachment, body strap only Bead chain, cres, passivate, with terminal Link chain, cres, passivate, with reverse link Wire rope, nylon jacket, with terminal Nylon rope, with terminal Wire rope, teflon jacket, with terminal Attachment omitted Wire rope, PVC jacket, with terminal #8 Sash chain, cres, passivate Wire rope, polyurethane jacket, with terminal TABLE II: STANDARD FINISHES GLENAIR SYMBOL B C G M NF FINISH Cadmium Plate, Olive Drab Anodize, Black Hard Coat, Anodic Electroless Nickel Cadmium Plate, Olive Drab Over Electroless Nickel See Back Cover for Complete Finish Information and Additional Finish Options 1. Metric dimensions (mm) are indicated in parentheses. 2. Custom engraving available, consult factory. 3. When using Connector Designator B refer to pages 18 and 19 for part number development. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 34 - Page 3 34 340-002 O-Ring Sealed Shorting Cap Backshell