360AS017C10

360-017 Non-Environmental Backshell with QwikClamp® Strain Relief Standard Profile - Self-Locking - Rotatable Coupling 36 CONNECTOR DESIGNATORS 360 F S 017 M 16 10 6 Product Series Connector Designator Angle and Profile H = 45° J = 90° S = Straight Basic Part No. Length ± .060 (1.52) Min. Order Length 1.5 Inch (See Note 1) Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Cable Entry (Tables IV) Shell Size (Table I) Finish (Table II) A-F-H-L-S SELF-LOCKING ROTATABLE COUPLING QWIKCLAMP® STRAIN RELIEF A Thread (Table I) E Typ. (Table I) Cable Range L (Table IV) Anti-Rotation Device (Typ.) K (Table IV) F (Table III) Internal Mechanical Strain-Relief Anti-Rotation (Typ.) H (Table III) G (Table III) J (Table III) © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 36 - Page 8 with QwikClamp® Strain Relief Standard Profile - Self-Locking - Rotatable Coupling See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. TABLE III: ELBOW DIMENSIONS Shell Size Conn. Desig. H A-F-L-S 09 08 11 10 13 12 15 14 17 16 19 18 21 20 23 22 25 24 28 32 36 40 44 F Max .795 (20.2) .820 (20.8) .844 (21.4) .861 (21.9) .888 (22.6) .904 (23.0) .929 (23.6) .956 (24.3) .979 (24.9) 1.197 (30.4) 1.280 (32.5) 1.294 (32.9) 1.340 (34.0) 1.360 (34.5) G Max 1.390 (35.3) 1.420 (36.1) 1.440 (36.6) 1.470 (37.3) 1.490 (37.8) 1.500 (38.1) 1.520 (38.6) 1.560 (39.6) 1.590 (40.4) 1.760 (44.7) 1.800 (45.7) 1.850 (47.0) 1.890 (48.0) 1.940 (49.3) H Max .906 (23.0) .966 (24.5) 1.026 (26.1) 1.076 (27.3) 1.136 (28.9) 1.176 (29.9) 1.236 (31.4) 1.296 (32.9) 1.356 (34.4) 1.636 (41.6) 1.780 (45.2) 1.876 (47.7) 1.986 (50.4) 2.235 (56.8) J Max 1.500 (38.1) 1.560 (39.6) 1.620 (41.1) 1.690 (42.9) 1.750 (44.5) 1.770 (45.0) 1.830 (46.5) 1.910 (48.5) 1.980 (50.3) 2.220 (56.4) 2.310 (58.7) 2.420 (61.5) 2.530 (64.3) 2.650 (67.3) Dash No. 08 12 16 20 24 28 32 36 40 44 48 K Max .530 (13.5) .710 (18.0) .720 (18.3) .720 (18.3) .660 (16.8) .790 (20.1) .870 (22.1) .830 (21.1) .820 (20.8) .910 (23.1) .900 (22.9) TABLE IV: CABLE ENTRY Cable Range L Max Min Max .720 (18.3) .128 (3.3) .250 (6.4) .910 (23.1) .233 (5.9) .375 (9.5) 1.090 (27.7) .358 (9.1) .500 (12.7) 1.220 (31.0) .625 (15.9) .482 (12.2) 1.340 (34.0) .545 (13.8) .750 (19.1) 1.530 (38.9) .875 (22.2) .670 (17.0) 1.720 (43.7) .795 (20.2) 1.000 (25.4) 1.850 (47.0) .889 (22.6) 1.125 (28.6) 1.970 (50.0) 1.014 (25.8) 1.250 (31.8) 2.090 (53.1) 1.155 (29.3) 1.375 (34.9) 2.280 (57.9) 1.500 (38.1) 1.280 (32.5) TABLE II: STANDARD FINISHES 1. Consult factory for shorter lengths on straight backshells. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. GLENAIR SYMBOL B C G M NF FINISH Cadmium Plate, Olive Drab Anodize, Black Hard Coat, Anodic Electroless Nickel Cadmium Plate, Olive Drab Over Electroless Nickel See Inside Back Cover for Additional Finish Options © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 36 - Page 9 36 360-017 Non-Environmental Backshell