360SB002M16

360-002 Non-Environmental Backshell with Strain Relief Low Profile - Direct Coupling 36 A-B -C-D-E-F G-H-J-K-L-S * Conn. Desig. B See Note 5 CONNECTOR DESIGNATORS * 360 F S 002 M 16 10 M 6 Product Series Connector Designator Angle and Profile A = 90° B = 45° S = Straight Basic Part No. Finish (Table II) A Thread (Table I) Length ± .060 (1.52) Min. Order Length 1.5 Inch (See Note 4) Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Strain Relief Style (H, A, M, F) Cable Entry (Tables X, XI, XII) Shell Size (Table I) DIRECT COUPLING Length ± .060 (1.52) Min. Order Length 2.0 Inch (See Note 4) STYLE 2 (STRAIGHT - See Note 1) J E (Table III) (Table IV) B (Table I) B (Table I) J (Table III) G (Table IV) F* (Table IV) B (Table I) Now Available with the “NESTOR” Glenair’s Non-Detent, SpringLoaded, Self-Locking Coupling. Add “-445” to Specify This AS85049 Style “N” Coupling Interface. * For Style F light duty strain relief use F1 and H1 dimensions in Table V. 1. When maximum cable entry (page 22) is exceeded, Style 2 will be supplied. (straight only.) 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter lengths on H* straight backshells. (Table 5. When using IV) Connector Designator B refer to pages 18 and 19 for part number development. STYLE H Heavy Duty (Table X) T STYLE A Medium Duty (Table XI) W STYLE M Medium Duty (Table XI) X STYLE F Light Duty (Table XII) Z .416 (10.5) Max Cable Range V Cable Range Y Cable Range Y Cable Range Z © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 36 - Page 4 with Strain Relief Low Profile - Direct Coupling TABLE III: FRONT ADAPTER J Max - Conn. Designator A-E-F J-H-L-S D-B-G-K C 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.735 (44.1) 1.180 (30.0) 1.250 (31.8) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 2.190 (55.6) 1.915 (48.6) See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. TABLE IV: ELBOW DIMENSIONS Elbow E F G Size Max Max Max 04 .567 (14.4) 1.187 (30.1) .636 (16.2) 06 .630 (16.0) 1.250 (31.8) .710 (18.0) 08 .692 (17.6) 1.312 (33.3) .731 (18.6) 10 .755 (19.2) 1.655 (42.0) .825 (21.0) 12 .848 (21.5) 1.765 (44.8) .988 (25.1) 16 1.036 (26.3) 1.952 (49.6) 1.087 (27.6) 20 1.130 (28.7) 2.098 (53.3) 1.325 (33.7) 24 1.255 (31.9) 2.155 (54.7) 1.337 (34.0) 28 1.317 (33.5) 2.250 (57.2) 1.827 (46.4) 32 1.348 (34.2) 2.343 (59.5) 2.027 (51.5) Shell Size 08/09 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 28/29 32/33 36 40 H Max 1.200 (30.5) 1.320 (33.5) 1.340 (34.0) 1.660 (42.2) 1.750 (44.5) 2.033 (51.6) 2.033 (51.6) 2.200 (55.9) 2.450 (62.2) 2.450 (62.2) Dash No. 04 06 08 10 12 16 20 24 28 32 TABLE X: CABLE ENTRY T V Cable Range Max Max Min Max .780 (19.8) .957 (24.3) .125 (3.2) .312 (7.9) .780 (19.8) 1.145 (29.1) .250 (6.4) .437 (11.1) .780 (19.8) 1.332 (33.8) .312 (7.9) .562 (14.3) .780 (19.8) 1.332 (33.8) .350 (8.9) .625 (15.9) .811 (20.6) 1.551 (39.4) .500 (12.7) .750 (19.1) .905 (23.0) 1.770 (45.0) .625 (15.9) .937 (23.8) 1.092 (27.7) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 1.124 (28.5) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 1.399 (35.5) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 1.399 (35.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) TABLE XII: CABLE ENTRY Cable Range Dash Z No. Max Min Max 02 .968 (24.6) .125 (3.2) .250 (6.4) 03 1.046 (26.6) .250 (6.4) .375 (9.5) 04 1.156 (29.4) .312 (7.9) .500 (12.7) 05 1.218 (30.9) .437 (11.1) .625 (15.9) 06 1.343 (34.1) .562 (14.3) .750 (19.1) 07 1.468 (37.3) .687 (17.4) .875 (22.2) 08 1.593 (40.5) .812 (20.6) 1.000 (25.4) 10 1.843 (46.8) 1.062 (27.0) 1.250 (31.8) TABLE V: ELBOW Elbow F1 Size Max 04 1.550 (39.4) 06 1.610 (40.9) 08 1.670 (42.4) 10 1.760 (44.7) 12 1.870 (47.5) 16 2.060 (52.3) 20 2.210 (56.1) Elbow Size 04 06 08 10 12 16 20 H1 Max 1.560 (39.6) 1.680 (42.7) 1.700 (43.2) 1.770 (45.0) 1.860 (47.2) 2.030 (51.6) 2.140 (54.4) Printed in U.S.A. TABLE XI: CABLE ENTRY Dash W X Y Cable Range No. Max Max Max Min Max 03* .437 (11.1) .760 (19.3) .843 (21.4) .156 (4.0) .250 (6.4) 04* .437 (11.1) .760 (19.3) .906 (23.0) .188 (4.8) .312 (7.9) 06* .500 (12.7) .760 (19.3) 1.093 (27.8) .281 (7.1) .438 (11.1) 08 .563 (14.3) .760 (19.3) 1.187 (30.1) .344 (8.7) .562 (14.3) 10 .563 (14.3) .760 (19.3) 1.281 (32.5) .375 (9.5) .625 (15.9) 12 .563 (14.3) .760 (19.3) 1.500 (38.1) .438 (11.1) .750 (19.1) 16 .656 (16.7) 1.073 (27.3) 1.719 (43.7) .562 (14.3) .938 (23.8) 20 .656 (16.7) 1.323 (33.6) 2.062 (52.4) .750 (19.1) 1.250 (31.8) 24 .656 (16.7) 1.323 (33.6) 2.312 (58.7) .781 (19.8) 1.375 (34.9) 28 1.188 (30.2) 1.572 (39.9) 2.719 (69.1) .969 (24.6) 1.625 (41.3) 32* 1.187 (30.1) 1.572 (39.9) 2.969 (75.4) 1.125 (28.6) 1.875 (47.6) 40* 1.125 (28.6) 1.572 (39.9) 3.531 (89.7) 1.469 (37.3) 2.375 (60.3) * Not available in Style M clamp. © 2005 Glenair, Inc. CAGE Code 06324 GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 36 - Page 5 36 360-002 Non-Environmental Backshell