370HS016XMT10

370-016 Composite Cable-Sealing Environmental Backshell with Self-Locking Rotatable Coupling and Strain-Relief Clamp or Nut Angle and Profile S - Straight W - 90° Split Clamp Coupling Nut Finish Symbol (See Table III) Composite Backshells CONNECTOR DESIGNATOR: A A F L H G U MIL-DTL-5015, -26482 Series II, and -83723 Series I and III MIL-DTL-38999 Series I, II MIL-DTL-38999 Series 1.5 (JN1003) MIL-DTL-38999 Series III and IV MIL-DTL-28840 DG123 and DG123A Product Series 370 - Environmental Strain Relief Dash Number (Table IV) 370 H S 016 Basic Part Number XO 19 20 C Connector Designator A, F, L, H, G and U Connector Shell Size (See Table II) Strain Relief Style C - Clamp N - Nut B SELF-LOCKING ROTATABLE COUPLING STANDARD PROFILE C Anti-Decoupling Device 1.250 (31.8) Max O-ring .750 (19.1) Max O-ring D F E Cable Range H Clamp E F Nut Cable Range J G .280 (7.1) Max G © 2009 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com A-38 with Self-Locking Rotatable Coupling and Strain-Relief Clamp or Nut TABLE II: CONNECTOR SHELL SIZE ORDER NUMBER Shell Size For Connector Designator* E F G Max Entry A F/L H G U ± .06 (1.5) ± .09 (2.3) ± .09 (2.3) Dash No.** 08 08 09 – – .69 (17.5) .88 (22.4) 1.06 (26.9) 10 12 10 10 11 – 08 .75 (19.1) 1.00 (25.4) 1.13 (28.7) 14 12 12 13 11 10 .81 (20.6) 1.13 (28.7) 1.19 (30.2) 16 14 14 15 13 12 .88 (22.4) 1.31 (33.3) 1.25 (31.8) 20 16 16 17 15 14 .94 (23.9) 1.38 (35.1) 1.31 (33.3) 20 18 18 19 17 16 .97 (24.6) 1.44 (36.6) 1.34 (34.0) 22 20 20 21 19 18 1.06 (26.9) 1.63 (41.4) 1.44 (36.6) 24 22 22 23 – 20 1.13 (28.7) 1.75 (44.5) 1.50 (38.1) 28 24 24 25 23 22 1.19 (30.2) 1.88 (47.8) 1.56 (39.6) 32 28 – – 25 24 1.34 (34.0) 2.13 (54.1) 1.66 (42.2) **Consult factory for additional entry sizes available. Dash No. 10 12 14 16 18 20 22 24 28 32 Clamp Saddle Closed .16 (4.1) .29 (5.1) .40 (10.2) .52 (13.2) .58 (14.7) .64 (16.0) .72 (18.3) .79 (20.1) .89 (22.0) .96 (24.0) TABLE IV: CABLE ENTRY Cable Range * H J ±.06 (1.5) ±.06 (1.5) Minimum Maximum .94 (23.9) .80 (20.3) .13 (3.3) .25 (6.4) 1.17 (29.7) .93 (23.6) .25 (6.4) .38 (9.7) 1.28 (32.5) 1.06 (26.9) .31 (7.9) .44 (11.2) 1.41 (35.8) 1.22 (31.0) .50 (12.7) .63 (15.9) 1.50 (38.1) 1.24 (31.5) .56 (14.2) .69 (17.5) 1.56 (39.6) 1.37 (34.8) .63 (16.0) .75 (19.1) 1.69 (42.9) 1.49 (37.8) .75 (19.1) .88 (22.2) 1.62 (41.1) .88 (22.4) 1.00 (25.4) 1.81 (46.0) 1.68 (42.7) 1.00 (25.4) 1.13 (28.6) 1.91 (48.5) 2.02 (51.3) 1.82 (46.2) 1.13 (28.6) 1.25 (31.8) * Cable range equals diameter of cable outer jacket. TABLE III: FINISH Symbol Finish Description No Plating - Black Color (Non-Conductive Finish) 2000 Hour Corrosion Resistant Electroless Nickel 2000 Hour Corrosion Resistant Ni-PTFE, NickelFluorocarbon Polymer. 1000 Hour GreyTM No Plating - Brown Color (Non-Conductive Finish) 2000 Hour Corrosion Resistant Cadmium/Olive Drab over Electroless Nickel XB XM XMT XO XW NOTES 1. 2. Coupling nut supplied unplated. See Table I in Intro for front-end dimensional details. © 2009 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com A-39 Composite Backshells 370-016 Composite Cable-Sealing Environmental Backshell A B C D E F G